Dongguan M19 Magnetic Suspension Keyboard Case iPad Pro Instruction Manual

Instruction Manual

Magnetic Suspension Keyboard Case
Operation Instructions

Product Description

• Magnetic installation, convenient operation
• Slim design, easy to carry
• Sensitive touch and instant action
• Wireless connection, no password pairing
• Smart dormancy, one button to wake up
• Actual power, worry free for use

Indicator

Power Button: Double click power button to turn on the power of keyboard, After the battery percentage is displayed, it will enter the “on” state. Double click power button to turn off the power of keyboard.
Bluetooth Indicator: Click right “option and B “button together, the bluetooth symbol will flash, and then the bluetooth symbol will be disappeared after device are paired.
Charging Indicator: While charging, the indicator flashes, and only the lower light stays on after full charge.
Battery Indicator: Charging is recommended when the energy percentage is less than 30%.
Caps Lock Indicator: The indicator flashes when the keyboard is on Capital input status.

Bluetooth Connection

1. Double click power button tot urn on power of the keyboard. After the battery percentage is displayed, it will enter the “Power On” state, and then click the right”option” and “B” buttons at the same time, the Bluetooth icon will lash, and enter the pairing mode.

2. Open and unlock the iPad and click the “Settings” icon.

3. In the “Settings” menu, click the menu, “Bluetooth”.

4. Turn on the “Bluetooth” switch, and the iPad will automatically search for Bluetooth keyboard devices.
   Discover the Bluetooth keyboard device: QM002 and click it. The Bluetooth keyboard will be automatically connected.

5. After The bluetooth Connection is successful, the pairing indicator is off, and the device “connected” will be displayed in the Bluetooth device list.

Keyboard Layout

New Added Function Combination Key

Right Option + Backlight Character Key = Backlight Adjustment
Right Option + B Key= Bluetooth Switch

Please Note:

1. Operating System: IOS 15.0 and above (device must support touch).
2. Tap Settings (after successful wireless pairing): Settings – General – Trackpad – Tap to tap / Two-finger assist point (on).
3. Sensitivity Settings: Settings – General – Trackpad – Tracking Speed (adjust to a suitable speed).
4. Touchpad (without physical buttons): no “drag” gesture function option.

iOS Touch Gestures

Tap Press with single finger until it feels a little touch feeling.
Drag Tap and hold an item, then swipe your finger across the trackpad to move it.
Open Program Expansion Dock Swipe the pointer across the bottom of the screen with one finger.
Open Notification Center Move the pointer with single finger to select the status icon at the top left, and then click, or move the pointer with single finger near the middle of the upper screen.
Move Left Or Righ t Swipe left or right with two fingers.
Open Searching From Home Screen Swipe down with two fingers.
Auxiliary Tap Move the cursor over the app icon with one finger, then tap or tap with two fingers to open the app menu.
Go To Main Screen Swipe up with three fingers.
Shift Between The Open APP Swipe left or right with three fingers.
Tap and Hold Press and hold with single finger.
Awake Click the touchpad or press any key on the keyboard.
Go To Home Screen Swipe the pointer across the bottom of the screen with one finger, and when the Dock appears, swipe the pointer across the bottom of the screen again.
Open ”Control Center ” Move the pointer with single finger to select the upper right status icon and use depressing click on it, or select the upper right status icon and  gently swipe upper with single finger.
Move Up Or Down Swipe up or down with two fingers.
Zoom Place two fingers close together, open to enlarge, or pinch to zoom out.
Open “Today” View When the Home or Lock screen is visible, swipe right with two fingers.
Open APP Switcher Swipe up with three fingers, pause and lift your finger.

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>