DS-HORNETPRO-5 FM Remote Control Instruction Manual

DS-HORNETPRO-5 FM Remote Control

Features

• Up to 150m Range
• 868MHz FM Technology
• Outputs Momentary or Latching
• Any Switch Map to Any Relay
• Systems supplied ’ready to Go’
• Maximum 30 Button Pairings
• Waterproof Receiver (IP68)
• High Security RF Protocol
• CE Compliant

Low Voltage Receiver (6-32Vdc/ac)

• 4 Changeover Relays Contacts Rated 5A @ 230Vac

High Voltage Receiver (230Vac)

• 2 Changeover Relays Contacts Rated 5A @ 230Vac, or,

High Voltage Receiver (230Vac)

• 1 Channel Direct 230Vac output Rated 20A (N/O only)

Intended Use

• Commercial/Industrial Remote Control
• Electric Gates
• Roller Shutter Doors
• Garden Lighting, Sports Grounds

Description

• A versatile Remote Control System for many different applications.
• Housed in a rugged IP68 weatherproof enclosure, HORNETPRO is available as either low voltage powered 4 changeover relays, mains powered receiver with 2 changeover relays, or a single direct 230Vac switching output.
• Installation is by screw terminals to the power supply and the output relay contacts.
• Outputs are activated by the button press on the remote transmitter.
• Remote Transmitters may be added to a receiver using the same ‘easy-learn’ process without opening the enclosure.

Complete Systems Part Numbers

Complete Systems Part Numbers (Transmitter and Receiver)

Remote Transmitter Part Numbers

Receivers Part Numbers

Technical specifications

Transmitters: FOBBER Transmitter

• Enclosure Rating: Standard IP68
• Battery Type: CR2032 (supplied)
• Battery Life: 2 years @ approx. 50 1/2second presses p/day
• Dimensions: 59 x 33 x 9 mm

Receiver Unit

• Enclosure Rating: IP68
• Dimensions: 130 x 112 x 42 mm (not including antenna)
• Operating Temperature: -10 to +50o Celsius.

Electrical Characteristics| MIN| TYPICAL| MAX| DIMENSION
---|---|---|---|---
Supply Voltage for Low Voltage version| 6|  | 32| Vdc or ac
Supply Voltage for high Voltage version|  | 230|  | Vac
Relay Rating|  |  |  |
HORNETPRO-8R4| 5| 12|
HORNETPRO-8R2M| 5| 12| A
HORNETPRO-8R1M20A| 20| 30|
Supply Current :            Quiescent|  | 25|  | mA
All (4) relays operating| 140
Time delay from Tx on Switch to Rx Relay operation|  | 30|  | mS
The time delay from TX SW relax to Rx Relay release|  | 30|  | mS

The relay contacts in this unit are for functional use only and must not be used for isolation purposes

Custom Systems

• Fobber keyfobs can be customised with a logo, colour or complete custom plastic housing for unique Branding.
• Please contact Sales for further info.

Mechanical Dimensions

• RF Solutions Ltd. Recycling Notice
• Meets the following EC Directives:
• DO NOT
• Discard with normal waste, please recycle.
• ROHS Directive 2011/65/EU and amendment 2015/863/EU
• Specifies certain limits for hazardous substances.
• WEEE Directive 2012/19/EU
• Waste electrical & electronic equipment. This product must be disposed of through a licensed WEEE collection point. RF Solutions Ltd. fulfils its WEEE obligations by membership of an approved compliance scheme.
• Environment agency registration number WEE/JB0104WV
• Waste Batteries and Accumulators Directive 2006/66/EC
• Where the batteries are fitted, before recycling the product, the batteries must be removed and disposed of at a licensed collection point. RF Solutions battery producer number BPRN00060.

Disclaimer

• Whilst the information in this document is believed to be correct at the time of issue, RF Solutions Ltd does not accept any liability whatsoever for its accuracy, adequacy or completeness.
• No express or implied warranty or representation is given relating to the information contained in this document.
• RF Solutions Ltd reserves the right to make changes and improvements to the product(s) described herein without notice.
• Buyers and other users should determine for themselves the suitability of any such information or products for their particular requirements or specification(s).
• RF Solutions Ltd shall not be liable for any loss or damage caused as a result of the user’s determination of how to deploy or use R F Solutions Ltd’s products.
• Use of RF Solutions Ltd products or components in life support and/or safety applications is not authorised except with express written approval.
• No licences are created, implicitly or otherwise, under any of RF Solutions Ltd’s intellectual property rights.
• Liability for loss or damage resulting or caused by reliance on the information contained herein or from the use of the product (including liability resulting from negligence or where RF Solutions Ltd was aware of the possibility of such loss or damage arising) is excluded.
• This will not operate to Limit or restrict RF Solutions Ltd’s liability for death or personal injury resulting from its negligence.

CONTACT

• RF Solutions Ltd
• William Alexander House,
• William Way,
• Burgess Hill,
• West Sussex,
• RH15 9AG
• Sales: +44 (0)1444 227900
• Support: +44 (0)1444 227909
• www.rfsolutions.co.uk.
• DS-HORNETPRO-5

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>