SAVI Controls QK6POE-01 PoE Keypad Instructions
- May 15, 2024
- SAVi Controls
Table of Contents
SAVI Controls QK6POE-01 PoE Keypad
Important Information
WARNING: SHOCK HAZARD
This device is intended for installation in accordance with the National
Electric Code and local regulations in the United States and the Canadian
Electrical Code and local regulations in Canada. If you are unsure or
uncomfortable about performing the installation, consult a qualified
electrician.
PoE Keypad Wiring
The PoE 6-Button Keypad requires data and power over a single ethernet connection. A PoE-compliant ethernet switch delivers both data and power over a standard CAT5e data cable. Installations with non-PoE switches require a PoE compliant power source, such as the PoE injector.
- Remove wall plate.
- Remove the switch mounting screws.
- Carefully remove the switch from the switch box.
- There is a single RJ45 port on the back of the keypad.
IMPORTANT: Ensure power over ethernet is rated for 30W at 48V DC
LEDs
When powered correctly via power over ethernet, all LEDs will illuminate to indicate the device is ready to be provisioned.
LEGAL
Input: 37-57VDC (nominal 48VDC)
Operating Ambient Temperature: 0-40°C
FOR INDOOR USE ONLY
FCC
Supplier’s Declaration of Conformity 47 CFR 2.1077 Compliance Information
Model: QK6POE-01
Responsible Party – US Contact Information 2520 Marsh Lane, Carrollton, TX
75006-2401 (214) 785-6510
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. Please visit savicontrols.com to find the full FCC/IC statements.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and any part of your body.
IC
This device complies with Part 15 of the FCC Rules and with RSS of Industry Canada. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with ISED RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and any part of your body.
Le présent appareil est conforme aux CNR d’ Industry Canada applicables aux appareils radio exempts de licence. L’ exploitation est autorisée aux deux conditions suivantes:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à linnorm NMB-003 du Canada
Customer Support
hellosavi.com
©2023 SAVI Controls Rev 10/27/23
References
- SAVI I Hello Simplicity I Commercial AV Designer and Manufacturer
- SAVI I Hello Simplicity I Commercial AV Designer and Manufacturer
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>