HALL ULTRA-V Series HDMI Splitter Extender User Manual
- May 15, 2024
- HALL
Table of Contents
HALL ULTRA-V Series HDMI Splitter Extender User Manual
Important Safety Instructions
-
Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
-
Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.
-
To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not place sources of naked flames, such as lighted candles, on the unit.
-
Clean this apparatus only with dry cloth.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Protect the power cord from being walked on or pinched particularly at plugs.
-
Only use attachments / accessories specified by the manufacturer.
Introduction
OVERVIEW
The ULTRA-V series are a family of extenders used to extend HDMI video to one or more remote locations up to 100m (328ft) over a single CAT6 cable. The extenders support various resolutions including 1080p @ 60Hz and 4K UHD @ 30Hz.
The Senders are available in three versions. ULTRA-V-1S has a single remote
output, ULTRA-V-4S has four, and ULTRA-V-8S has eight. All Senders feature an
HDMI input and a local HDMI “loop” output.
This allows for connection of a local display, or daisy chaining the HDMI to
another Sender to increase the number of remote displays.
The Receivers have a single remote input, and one HDMI output for connection to a remote display.
Typical Connection Diagram
FEATURES
- Supports high resolution HDMI video including FHD (1920×1080), WQHD (2560×1440), and 4K UHD (3840×2160)
- Local HDMI outputs at all Senders to connect to a local display, or to daisy-chain a second ULTRA-V Sender
- 1,4, or 8 outputs to distribute video to multiple locations.
- No video calibration required; no video quality reduction due to cable length.
- ULTRA-V Receivers are compatible with ULTRA-4K Sender.
Package Contents
ULTRA-4K-S
- 1x ULTRA-4K-S
- 1x power supply (Hall P/N 511-IEC5V4AP5L, MFG P/N 3A-186DB05)
ULTRA-4K-R
- 1x ULTRA-4K-R
- 1x power supply (Hall P/N 511-IEC5V4AP5L, MFG P/N 3A-186DB05)
Setup
INSTALLATION
- Connect the HDMI Source to the ULTRA-V Sender port marked “HDMI IN” using a quality HDMI cable
- Optionally, connect HDMI Display to the ULTRA-V Sender port marked “HDMI OUT” or daisychain to a second ULTRA-V “HDMI IN” port
- Using CAT6 cable(s), connect the ULTRA-4K-S “OUTPUT” port(s) to the ULTRA-V-R “INPUT” port
- Connect ULTRA-V-R “HDMI OUTPUT” to a Display using a quality HDMI cable
- Once all connections have been made, apply power to the ULTRA-V Sender(s) and ULTRA-V-R Receiver(s)
Display Port Adaptes
While HDMI is the most widely adopted video standard, there are a number of computer and display manufacturers that rely on DisplayPort for higher resolutions such as 2560 or 4K. Hall Technologies offers 4K compatible adapters to convert between these two video standards.
Note: These adapters are unidirectional. For example, the DisplayPort to HDMI adapter cannot convert an HDMI signal to DisplayPort.
Model GC-DP-HD: DisplayPort source to HDMI output
Virtually all monitor and TV’s have HDMI (or DVI) inputs. But if your display only has a display port input, the following adapter convers HDMI to DP.
Model GC-DP-HD: DisplayPort source to HDMI output
Connectors & Indicators
ULTRA-V-1S Front
-
5V DC: Power input. Connect supplied 5V power supply to power Sender.
-
SERVICE: USB-Mini connection, used to restore factory defaults via PC GUI.
-
PWR/VID/ACT: Status indicators
a. PWR: This LED indicates power is applied to the unit.
b. VID: This LED is lit when HDMI video input is present.
c. ACT: This LED blinks when HDMI processor is active (normal). -
HDMI OUT: HDMI local Output.
-
HDMI IN: HDMI Input port.
ULTRA-V-1S Back
- OUTPUT: CAT6 Output port to ULTRA-V-R Receiver
ULTRA-V-4S/8S Front
-
5V DC: Power input. Connect supplied 5V power supply to power Sender.
-
SERVICE: USB-Mini connection, used to restore factory defaults via PC GUI.
-
PWR/VID/ACT: Status indicators
a. PWR: This LED indicates power is applied to the unit.
b. VID: This LED is lit when HDMI video input is present.
c. ACT: This LED blinks when HDMI processor is active (normal). -
HDMI OUT: HDMI local Output.
-
HDMI IN: HDMI Input port.
ULTRA-V-4S/8S Back
- OUTPUTS: CAT6 Output ports to ULTRA-V-R Receivers. (Note: ULTRA- V-4S has output ports 1 through 4)
ULTRA-V-R Front
- 5V DC: Power input. Connect supplied 5V power supply to power Sender.
- SERVICE: USB-Mini connection, used to restore factory defaults via PC GUI.
- PWR/VID/ACT: Status indicators
- PWR: This LED indicates power is applied to the unit.
- VID: This LED is lit when HDMI video is being output.
- ACT: This LED blinks when HDMI processor is active (normal).
- HDMI OUT: HDMI local Output.
ULTRA-V-R Back
- INPUT: CAT6 Input port from ULTRA-V-S Sender.
Troubleshooting
If you are experiencing problems getting the ULTRA-V-XX to work properly, please use the following troubleshooting suggestions.
- Ensure that all connections are secure. Check all status LEDs to ensure proper operation.
- Try resetting the system by unplugging the power supply, waiting 5 seconds, and plugging it back.
- Try restoring factory defaults using the PC GUI.
Specifications
Video
Standards| DVI (single link)HDMI 1.4 video specs including 12 it color depth,
3D video HDCP 1.4
Connectors| ULTRA-4V-1S 1x HDMI input 1x HDMI output 1x Rj45 output1x
mini-USB Service Port1x 2.0 mm locking DC power input ULTRA-4V-4S 1x HDMI
input 1x HDMI output 4x Rj45 output1x mini-USB Service Port1x 2.0 mm locking
DC power input ULTRA-4V-8S 1x HDMI input 1x HDMI output 8x Rj45 output1x
mini-USB Service Port1x 2.0 mm locking DC power input ULTRA-4V-R 1x HDMI
input 1x HDMI output 8x Rj45 output1x mini-USB Service Port1x 2.0 mm locking
DC power input
Resolutions| DVI signal VGA (640×480) thru WUXGA (1920×1200)
HDTV signal 480p through 4K60 4:2:0 (Interlaced resolutions are not supported)
Refresh Rates| 60 Hz for resolutions up to and including HD (1920×1080) and
WUXGA (1920×1200)30 Hz for resolutions above and including QHD (2560×1440)
General
Power Supply| 100 VAC to 240 VAC, 47-63 Hz, External; 5 VDC
Temp/humidity| Storage: -40 to +158 degrees F (-40 to +70 degrees C)/ 10% to
90%, non- condensingOperating: +32 to +122 degrees F (0 to +50 degrees C) /
10% to 90%, non-condensing
Power| 5 VDC, 4.0 A power supply
Cooling| Convection
Enclosure Type| Metal (Steel)
Dimensions|
| Model| Device| Shipping|
ULTRA-V-1S ULTRA-V-R ULTRA-V-4SULTRA-V-8S| 5.50’’L x 4.40’’ W x 1.27’’
H5.50’’L x 4.40’’ W x 1.27’’ H6.90’’ L x 7.12’’ W x 1.45’’ H6.90’’ L x 7.12’’
W x 1.45’’ H| 5.30” L x 8.70” W x 3.10” H5.30” L x 8.70” W x 3.10” H7.55’’ L x
10.15’’ W x 2.65’’ H7.55’’ L x 10.15’’ W x 2.65’’ H
Product Weight| | Model| Device| Shipping|
ULTRA-V-1S ULTRA-V-R ULTRA-V-4SULTRA-V-8S| 1.01 lbs ( 0.46 kg) 1 lbs ( 0.45
kg)1.83 lbs ( 0.83 kg)1.92 lbs ( 0.87 kg)| 2.8 lbs (1.3 kg)2.5 lbs (1.1 kg)3.5
lbs (1.6 kg)4.0 lbs (1.8 kg)
Safety| CE
EMI/EMC| CE, FCC, Class A
MTBF| 90,000 hours (estimate)
Warranty| 3 years parts and labor
© Copyright 2023. Hall Technologies All rights reserved.
1234 Lakeshore Drive, Coppell, TX 75019 halltechav.com/ [email protected] +1 (800)-959-6439
Hall Technologies November 22, 2023 Page 12 of 12
Symbols
Documents / Resources
| HALL
ULTRA-V Series HDMI Splitter
Extender
[pdf] User Manual
ULTRA-V Series HDMI Splitter Extender, ULTRA-V Series, HDMI Splitter Extender,
Splitter Extender
---|---