cecotec DRUMFIT Magno Connected Bluetooth Indoor Bike Instruction Manual

cecotec DRUMFIT Magno Connected Bluetooth Indoor Bike

Product Specifications

• Brand: Drumfit
• Model: Indoor Eolo
• Type: Indoor Bike
• Color: Various
• Dimensions: Varies by model
• Weight: Varies by model
• Material: Steel frame, plastic components

Product Usage Instructions

1. Parts and Components
   Before using the Drumfit Indoor Eolo, familiarize yourself with all the parts and components. Refer to the user manual for detailed diagrams and descriptions.

2. Before Use
   Read all safety instructions and guidelines provided in the manual before using the indoor bike. Ensure you are in good health and consult a doctor if you have any medical conditions.

3. Assembly
   Follow the assembly instructions carefully to set up the Drumfit Indoor Eolo correctly. Make sure all parts are securely attached before use.

4. Operation
   Mount the bike properly and adjust the settings according to your preferences. Start pedaling at a comfortable pace and gradually increase intensity as needed.

5. Information on Exercising
   Monitor your heart rate and listen to your body during the workout. Stop immediately if you experience any discomfort or unusual symptoms.

6. Cleaning and Maintenance
   Regularly clean the bike to prevent dust buildup and ensure smooth operation. Check for any loose parts and tighten them as necessary.

FAQ

• Q: What should I do if the bike makes unusual noises during operation?
  A: Check for any loose screws or parts and tighten them. If the issue persists, contact customer support for further assistance.

• Q: How often should I lubricate the moving parts of the bike?
  A: Refer to the maintenance section of the manual for specific lubrication guidelines. Typically, it is recommended to lubricate moving parts every few months or as needed.

• Q: Can I adjust the resistance levels of the Drumfit Indoor Eolo?
  A: Yes, most models allow you to adjust the resistance levels to customize your workout intensity.

SAFETY INSTRUCTIONS

• Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.
• Read the entire manual before assembling and using the machine. The product will only be safe if it is properly assembled, cared for and used correctly. It is your responsibility to make sure every user is informed about the warnings and precautions stated in this instruction manual.
• Before starting a training session, it is recommended that you consult your doctor if you have any adverse health or physical condition that may pose a risk to your safety or make it difficult to use the appliance properly. Your doctor’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.
• Be aware of your body signals. Incorrect or excessive exercise can deteriorate your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, extreme shortness of breath, dizziness, or nausea. If you experience any of these conditions, you should consult your doctor before continuing with your training.
• This machine can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the machine in a safe way and understand the hazards involved. Children must not play with the machine. Cleaning and user maintenance should not be carried out by unsupervised children.
• Keep children and animals away from the assembling area, as small parts could cause risk of suffocation if swallowed.
• Keep children and pets away from the machine. Do not allow children to use it and/or play with the machine. It is designed for adults only.
• Use the stationary bike on a solid, even surface with a protective cover for your floor or carpet.
• Make sure that the screws and nuts are securely fastened before using the machine.
• The safety level of the machine can only be ensured through regular examination for damage or signs of wear and tear.
• Use the machine as indicated in this instruction manual. If you find any defective component while assembling or checking the machine, or if you hear any unusual noise coming from the equipment during use, stop using it. Do not use the equipment until the problem has been solved.
• Make sure you have enough space to lay out the parts before starting. Leave a free space of at least 0.6 m in front of all access areas of the machine in case of emergency. You can share the access areas with other machine nearby. Always ensure there are not any objects blocking the entrance and exit of the machine.
• Wear suitable clothing while using the machine. Avoid wearing loose clothing which may get caught in the equipment.
• WARNING: this machine operates by means of a flywheel. Be careful when in motion and ensure that it completely stops before getting down, as the inertia of the flywheel and pedals could cause injury to yourself or others.
• Maximum user weight: 150 kg.
• It is not recommended for outdoor use.
• This machine is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• The machine is not suitable for therapeutic use.
• Care must be taken when lifting or moving the equipment so as not to injure your back. Always use proper lifting techniques and/or assistance.
• WARNING: the heart rate sensors may be inaccurate, as it is not a medical device. Sensors can give you estimated heart rate information. If you feel any discomfort, stop exercising immediately. It may be dangerous for your health. If it persists, go immediately to the nearest medical centre.
• If repairs are required, please consult your supplier for further information or contact Cecotec Customer Service.
• If any parts protrude from the machine, they may interfere with the user’s movement.

Instructions on batteries:

• Do not disassemble, open, or damage the batteries.
• Keep the batteries out of the reach of children.
• Pay particular attention to small batteries. In case of battery ingestion, please seek medical attention immediately.
• Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
• Do not short-circuit the batteries. Do not store batteries in an untidy manner, in a box, or drawer where they can short-circuit each other or be short-circuited by other metal objects.
• Do not subject batteries to mechanical shock.
• Leaks from the batteries can occur under extreme conditions. Do not touch any liquid that leaks from the batteries. If the liquid gets into contact with skin, wash immediately with soap and water. If the liquid gets into the eyes, wash them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery and dispose of it immediately in accordance with local regulations.
• Pay attention to the positive (+) and negative (-) marks on the batteries and ensure they are used correctly.
• Do not use any batteries that are not designed for use with the appliance.
• Do not use the appliance if powered with batteries that differ in capacity, size, or type.
• The use of the batteries by children must be supervised.
• In case of battery ingestion, please seek medical attention immediately.
• Always buy the batteries recommended by the device manufacturer.
• Keep the batteries clean and dry.
• Wipe the battery terminals with a clean, dry cloth if they become dirty.
• Keep the original instruction manual for future reference.
• Use the batteries only for their intended purpose.
• Whenever possible, remove the batteries from the console when not in use.
• Dispose of the battery correctly.

PARTS AND COMPONENTS

Fig. 1

NOTE:
the graphics in this manual are schematic representations and may not exactly match the device.

BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box   content

• DrumFit Indoor Eolo stationary bike
• Assembly kit
• Instruction manual
• Power adapter
• Chest strap heart-rate monitor
• CR2032 battery for the heart-rate band

ASSEMBLY

Remove all parts from the packaging, put them on the floor and check that none are missing. Please note that some parts are already installed on the main frame. In addition, there are some parts that are connected with individual parts. This will make assembly quicker and easier for you.

1. STEP 1. Fit the stabilisers (Fig. 2)

2. Fix the front stabiliser (8) to the main frame (6). To do this, use two Allen bolts (14), two pressure washers (15) and two curved washers (16). Repeat the process with the rear stabiliser (9).

3. You can adjust the height of the handlebar stem (4) and saddle post (10) with the L-shaped adjustment knob (5). Loosen it, set the saddle post to the desired height, and retighten it.

   ---

4. STEP 2. Fit the pedals and the saddle (Fig. 3)

5. The pedals (7L+7R) have a mark: the right pedal has an R, and the left one an L. Note: the reference (right/left) is taken as if the user was sitting on the saddle. Put each pedal (7L+7R) on its corresponding crank. (Note: the right pedal is adjusted clockwise; the left one is adjusted counterclockwise).

6. Insert the saddle (13) on its sliding guide (12). Tighten the knob securely.
   

7. STEP 3 Insert the handlebar (3) on its stem (4) (Fig. 4).

8. Connect the cable in the stem to the handlebar cable. Then, fix the handlebar (3) to the stem (4) with 4 Allen bolts (17).

9. Attach the device holder (2) to the handlebar.

   ---

10. STEP 4. Fit and plug in the bike

11. Check that all parts are correctly assembled and fixed. If they are, the assembly is finished.

12. To train comfortably and safely, the bike must be completely stable. So, if you notice that the bike wobbles during use, adjust the front and rear stabilisers feet (8 and 9).
    Before plugging in the bicycle, read the specifications of the power adapter. Once you have done so, place one end of the adapter into the hole provided at the front of the main frame.
    The bike is now ready for use.

OPERATION

• Getting on and off the bicycle

  • Before getting on the bicycle, make sure the pedals are properly fixed. Stand next to the bike and pass the leg that is closer to it over the frame to sit on the saddle; then, insert your feet in the pedals.
  • To get off the exercise bike, do the previous step in reverse order.

• Adjusting the resistance
  The pedalling resistance can be adjusted with the console built into the handlebar. Read the console operation to adjust it.

• Assembling the saddle
  

  • To adjust the height of the saddle, remember that the correct position is the one in which your waist is not tilted to the side when the pedal is in the lower position and the foot is perfectly inserted in the toe clips.
  • Adjust the saddle properly to ensure maximum efficiency and comfort during exercise. The saddle is in the correct position if the user has a slightly bent knee when one of the pedals is at a 90-degree angle relative to the ground.
  • To adjust the saddle height, simply loosen the L-shaped adjustment knob (5), raise, or lower the saddle to the desired height, and tighten the knob.

Adjusting the handlebar

• Make sure the handlebar height is approximately at the same height as the saddle. Remember that this parameter will depend on the biomechanics and physiology of the user. If you feel uncomfortable in this position or your knees touch the handlebar, you should increase the height slightly.
• To adjust the handlebar height, simply loosen the L-shaped adjustment knob (5), adjust the handlebar to the desired height, and tighten the knob.

Information on the chest strap

Chest strap parts (Fig. 5):

• A. Sensor
• B. Strap structure
• C. Transmitter
• D. Battery compartment
• E. Elastic band

Specifications

1. 5.4 kHz and 2.4 GHz signals transmitted together to be compatible with multiple devices on the market.
2. Heart rate detection range: 40-240 beats per minute.
3. Uses one CR2032 battery. The battery can last 6 months if used one hour a day.

How to wear the chest strap

1. Insert one end of the elastic band (E) into the hole of the strap structure (B).
2. Moisten the sensors (A).
3. Now wrap the elastic band around your chest and insert the other end of the elastic band (E).
4. Adjust the elastic band (E) so that if fits snugly around the torso and does not move but does not cause discomfort.
5. The strap should be placed on the lower part of the chest as shown in Fig. 6.

When the sensor does not detect a pulse for more than 12 seconds, it automatically enters power saving mode.
To change the battery, you can use a coin or a screwdriver that fits into the slot in the battery compartment to unscrew it. The battery must be inserted with the “+” sign in contact with the battery cover. Once replaced, screw the cover back on.

WARNING: the heart rate sensor requires the skin or sensors to be moist and free of a dense layer of body hair in order to function properly.

Display information. Fig. 7

1. : if this icon is lit, Bluetooth is enabled.
2. STOP: if this icon is lit, the machine is stopped.
3. START: if this icon is lit, the machine is on.
4. SCAN: when training, the SCAN mode will display the following functions  (each function will remain on the display for 6 seconds): TIME-SPEED-RPM-DISTANCE-CALORIE-PULSE-WATT. You can set the desired function by pressing the button.
5. LEVEL: it displays the resistance of the current level.
6. TIME: it displays the elapsed training time in minutes and seconds. The console will automatically count the time from 0:00 to 99:59 in one second intervals. You can set the value from 01:00 to 99:00.
7. SPEED: it displays the speed training in km/h.
8. RPM: it displays the pedalling frequency.
9. DISTANCE: it displays the distance travelled during each training up to a maximum of 99.99 km. You can set the target distance from 1 to 99.00 km.
10. CALORIE: it displays the total number of calories burned during training. Counts from  0 to 9999. You can set target calories from 10 to 9990.
11. PULSE: it displays heart rate during training in beats per minute. You can set the target heart rate from 80 to 180.
12. WATT: it displays the amount of mechanical power the console receives from your  training.

Operation

1. Turn the knob to choose between the different programmes (1-14). Next, press the button to chose the desired programme. You can vary the resistance level once the programme is selected. Simply turn the display knob to the right or left while in the LEVEL function.
2. Press the button to set the different targets (TIME-DISTANCE-CALORIE-PULSE). Press the button to enter the target. Turn it to increase or decrease the value, then, press the button again to confirm the setting. While exercising, the values of these four functions will be displayed every 6 seconds. Press the button to select the function you wish to view at any time.
3. When you start training, the STOP indicator light will switch off and the START indicator light will switch on.

Wake-up function
If, after 4 minutes, the console has not received any signal nor the button has been pressed, it will go into sleep mode (the display will be switched off). Press the button to switch it back on.

Error codes

• E1 (ERROR 1):
  If you are training, but the console does not receive any data from the training for 4 seconds, the error code E1 will be displayed.

• E2 (ERROR 2):
  When the console has problems reading the data saved in the memory, the error code E2 will appear on the display as soon as the console is switched on.

• E3 (ERROR 3):
  If you are training and the bike has not exited STOP mode after 4 seconds, the error code E3 will appear on the display.

PROGRAMMES :

• The bike has the following programmes (Fig. 8)
• P1: Manual. This is the default programme, with no programmed resistance changes. The user can choose between any resistance level.
• P2: Steps. It simulates a staggered ascent.
• P3: Hill. It simulates climbing a mountain slope.
• P4: Rolling. Reproduces a normal route with climbs and descents by adjusting the resistance automatically.
• P5: Valley. It simulates the course of a valley (downhill and then uphill).
• P6: Fat Burn. Adjust your training so that the intensity is just right for targeted fat loss training.
• P7: Ramp. Training that reproduces the prolonged ascent prior to a slight descent.
• P8: Mountain. Simulates the ascent and descent of a mountain slope.
• P9: Intervals. It reproduces an interval training: it alternates between high and low intensity training.
• P10: Random. Modification of the resistance in a random way.
• P11: Plateau. Simulates the route of a plateau or high plateau.
• P12: Fartlek. It reproduces Fartlek training, which combines times at a higher intensity with times at a lower intensity.
• P13: Precipice. Simulates an intense climb with an intense descent.
• P14: Watt Control. It is a programme in which you can enter the power target to be developed in training.

A table detailing the resistance data for each programme is inserted below:

Using the device holder

• Pull up the top edge of the bracket, then place the mobile phone or tablet in the bracket.
• Then, release the upper edge of the bracket. Fig. 9
• Dating training, you can rotate the bracket to the left or to the right to get a better view of your mobile phone or tablet. Fig. 10

Bluetooth connection
By scanning the QR code below you can access a manual explaining how to pair the DrumFit Indoor Eolo stationary bike with the Kinomap app: ATTENTION: during the first use of the chest strap must also be connected to the Kinomap APP. To do this, select “additional sensors” in the training screen and pair with the chest strap.

INFORMATION ON EXERCISING

A proper workout should consist of the following phases:

• Warm-up: consists of a session of stretching and low-intensity exercise lasting 5 to 10 minutes. A proper warm-up increases your body temperature, heart rate, and circulation in preparation for exercise. Fig. 11

• Training: consists of 20 to 30 minutes of exercise.
  (Note: during the first few weeks of exercise do not keep your heart rate high for more than 20 minutes). Fig. 12

• Cool-down: consists of 5 to 10 minutes of stretching exercises. This will increase the flexibility of your muscles and will help prevent injuries. Fig. 11

CLEANING AND MAINTENANCE

• Lubricate the moving parts periodically to prevent premature wear.
• Inspect and tighten all parts before using the machine. Replace any defective parts immediately, and do not use the equipment again until it is in perfect working condition.
• The machine can be cleaned using a slightly damp cloth and mild non-abrasive detergent. Do not use solvents.
• Avoid exposing the machine to direct sunlight, especially the console.
• Do not try to repair the machine by yourself. Should you have any difficulty with the assembly or operation of the exercise bike, or if you think that any part is missing, contact the official Cecotec Technical Support Service.
• To move the machine, either pull down on the handlebars until the rear of the bike is in the air or lift the bike by grasping the rear stabiliser. This allows you to move the bike to the desired position in complete safety.

Note:
The cleaning and maintenance frequency depends on the use frequency and intensity.

TROUBLESHOOTING

bike is level.
The handlebar is not stable| The bolts are loose.| Tighten the bolts.
Loud noise from moving parts| The parts are not tightened properly.| Tighten them.

If none of these situations match your problem, do not attempt to disassemble or repair the machine by yourself. Repairs carried out by unqualified persons may result in injury or serious malfunctions. Contact the official Cecotec Technical Support Service. The repair must be carried out by an authorised technician, and you must use only original spare parts.
Unauthorised self-maintenance or maintenance will affect the safe use of the product and the application of the warranty policy.

TECHNICAL SPECIFICATIONS

• Product reference: 07249
• Product: DrumFit Indoor Eolo
• Maximum user weight: 150 kg
• HA Class Bicycle Bluetooth module data
• Frequency band of operation of the LV module: 2.4 GHz
• Maximum power transmission of Bluetooth module: 4 dBm
• Data from the Bluetooth module of the chest strap
• Frequency band of operation of the LV module: 2.4 GHz
• Maximum power transmission of Bluetooth module: 0 dBm
• Weight: 34 kg
• Dimensions: 130x53x125 cm

Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

• This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.
• Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
• Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

• Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
• It is recommended that repairs be carried out by qualified personnel.
• If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

SIMPLIFIED DECLARATION OF CONFORMITY
Cecotec Innovaciones hereby declares that this stationary bike, model 07249 DrumFit Indoor Eolo, is in conformity with the Radio Equipment Directive 2014/53/EU.
The full text of the EU Declaration of Conformity can be found on the following website: www.cecotec.es

www.cecotec.es
Cecotec Innovaciones S. L. Av. Reyes Católicos, 60 46910, Alfafar (Valencia), Spain

References

• Cecotec Tienda Oficial | Envío Gratis | Mejor Precio
• Cecotec Tienda Oficial | Envío Gratis | Mejor Precio

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>