Hypertherm Cartridge Reader and App User Guide
- June 4, 2024
- Hypertherm
Table of Contents
Hypertherm Cartridge Reader and App
Purpose
This Field Service Bulletin gives you the instructions for installing and using the Hypertherm Cartridge Reader app. You use the Cartridge Reader app with a cartridge reader and a smartphone that has a near‑field (NFC) antenna.
Kit 528083 contents
Part number| ****
Description
| ****
Quantity
---|---|---
429106| Cartridge reader| 1
127848| Silicon band for cartridge reader| 1
Install and open the Cartridge Reader app
- On your smartphone, open the Google Play™ store (Android™ phone), the Apple® App Store® app (iPhone®), or the app store that supports your device.
- Download and install the Hypertherm Powermax SYNC Cartridge Reader app.
- Open the app on your smartphone.
Scan a cartridge
-
Put the cartridge reader fully into the Hypertherm cartridge. Hold the cartridge reader and cartridge together in one hand.
-
On the Home screen, select Tap to Scan.
-
Put the NFC antenna of your smartphone directly on the Hypertherm H on the cartridge reader.
-
Do one of the following:
-
(Android phone)
The app scans the cartridge and shows a notification. Tap Done. -
(iPhone)
Tap Start Scan. The app scans the cartridge and shows a notification. On the Ready to Scan screen, tap Cancel. Then tap Done.
-
For more information
For frequently asked questions and troubleshooting information| Open the ☰
Menu and then select Questions and Answers.
---|---
For technical service| Open the ☰ Menu and then select About Us.
ABOUT COMPANY
© 9/2021 Hypertherm, Inc. 811350 Revision 2
Powermax, SYNC, and Hypertherm are trademarks of Hypertherm, Inc. and may be
registered in the United States and/or other countries. All other trademarks
are the property of their respective holders. Google Play and Android are
trademarks of Google LLC. App Store, and iPhone are trademarks of Apple Inc.,
registered in the United States and other countries and regions.