Securaco SKF-B-V1 Smart Keyfob Instructions
- May 15, 2024
- Securaco
Table of Contents
Securaco SKF-B-V1 Smart Keyfob
Product Information
Specifications:
- Manufacturer: [Manufacturer Name]
- Model: [Model Number]
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved for uncontrolled environment
- Minimum Distance: 0cm between radiator and body
Product Usage Instructions
Installation:
- Ensure the device is placed in a well-ventilated area.
- Connect the device to a power source as per the manufacturer’s instructions.
- Position the device with a minimum distance of 0cm between the radiator and your body.
Operation:
- Turn on the device using the designated power button.
- Follow the user manual for specific instructions on device operation.
- If experiencing interference, ensure no obstructions are blocking the device’s signals.
Maintenance:
- Regularly clean the device exterior with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or moisture.
- Refer to the user manual for any specific maintenance requirements.
FAQ
Q: Can I modify the device without voiding the warranty?
A: Any changes or modifications not approved by the manufacturer could
void your warranty and authority to operate the equipment.
Please refer to the user manual for more information.
Q: What should I do if I experience interference during operation?
A: If you encounter interference, ensure there are no obstructions
blocking the device’s signals. Additionally, check for nearby electronic
devices that may be causing interference.
GUIDE FOR USE
PARAMETERS
WARNING
The battery may overheat if the following conditions occur,which may cause a fire or explosion hazard
- Battery dismantling, impacting, squeezing or putting into fire, soaking.
- Contact metal or electrode short.
INSTRUCTION
- Add KEY in the app
- Download the APP by scanning the QR code, or search “Smart Life” on App Store / Google Play. Create a new account or log in with an existing account.
- Press the button of the KEY for 3 seconds until you hear the beep.
- Start the APP, select “Add Device”
- Select “Auto Scan”, after you find the device, then click “Next”
- After the device is added, click “Done”
- Bind KEY to smart lock
- Select smart lock in the APP, Click
- Click “add”, Select KEY, Click “Bind”
- Select KEY, click * to add Bluetooth Key.
- Kill the APP to break the connection from your phone and lock,so the KEY can connect to the Icok.
NOTE
- After adding the Bluetooth Key, please wait for 2 minutes (or Kill the APP) to disconnect the phone and the lock, so the KEY can connect to the lock
- After you replaced the battery, the existing Temporary key may not work and you need to connect the KEY to the APP for one time.
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.