amazfit A1971 Smart Watch User Guide
- June 6, 2024
- Amazfit
Table of Contents
A1971 Smart Watch
User Guide
Pairing the Watch
- Scan the QR code on the Instruction Manual with your mobile phone to download the app to your mobile phone. You can also download the latest version of app from the Google Play Store or Apple App Store.
- Open the app, register an account and log in.
- Follow the steps in the app to pair your watch correctly. Once pairing is complete, the watch will display the correct time.
- You can set other watch features as needed.
Download Zepp App
https://api-watch.huami.com/forwarding/watchUS
Note:
- For a better user experience, please use the most recent version of the APP.
- The operating system needs to be Android 7.0, iOS 12.0, or above.
- Do not pair the watch directly using your mobile phone’s Bluetooth. Follow the steps in the app to pair your watch correctly.
Basic Parameters
Product Name: Smart Watch | Bluetooth frequency: 2400–2483.5 MHz |
---|---|
Product model: A1971 | Operating temperature: 0°C to 45°C |
Bluetooth version: BLE V5.1 | Water resistance rating: 5 ATM |
BLE output power: < 5 dBm | Input: DC 5V 500mA MAX |
View product certification information on the watch’s Settings > System >
Regulation page.
Device requirements: Devices installed with Android 7.0 or iOS 12.0 or above
OS versions
Package Contents: Smartwatch with the band, Charging base, Instruction manual
Please refer to the watch user interface to see the software version.
Regulatory Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AC8UA1971
Any changes or modifications that are not expressly approved by the party responsible for the compliance may void the user’s authority to operate the device.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with
Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
Certifications and Safety Approvals
Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio
device type A1971 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://support.amazfit.com/en/
Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio
device type A1971 is in compliance with Radio Equipment
Regulations 2017 (S.I. 2017/1206). The full text of the UK declaration of
conformity is available at the following internet address:
http://en.amazfit.com/support.html
Battery Safety
- This device is equipped with a built-in battery that cannot be removed or replaced. Do not disassemble or modify the battery by yourself.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
- Do not use unauthorized or incompatible power adapters, chargers, or data cables, which may damage the watch and accessories, or cause fire, explosion, or other hazards.
Troubleshooting
Please check the FAQ on the website: https://support.amazfit.com/en.
For more information about safety precautions, repair, and maintenance, please
refer to the electronic manual.
Warranty and Return Policy
The Amazfit Limited Warranty covers Amazfit products against manufacturing
defects beginning on the original purchase date. The warranty period is 12
months or another specified period as the applicable consumer laws in the
consumer’s country of purchase required. Our warranty is in addition to rights
provided by applicable consumer laws.
Official website: en.amazfit.com
Support: support.amazfit.com/en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>