IFIXIT APL1109 Apple Vision Pro Chip ID User Guide

May 15, 2024
IFIXIT

IFIXIT-LOGO

IFIXIT APL1109 Apple Vision Pro Chip ID

IFIXIT-APL1109Apple-Vision-Pro-Chip-ID-PRODUCT

Product Specifications

  • Processor: Apple APL1109/339S01081E M2 octa-core applications processor & graphics processing unit
  • Memory: Micron MT62F1G64D8WT-031 XT:B 8 GB LPDDR5 SDRAM
  • Storage: Kioxia K5A4RC2097 256 GB NAND flash
  • Power Management: Apple APL109C/343S00627, Apple APL109D/343S00628, Apple APL1004/343S00629
  • Connectivity: USI 339S01015 WiFi/Bluetooth module
  • Audio: Likely Cirrus Logic CS46L11 audio codec
  • Charging: STMicroelectronics STM32L4A6VG Arm Cortex-M4 microcontroller
  • USB Type-C: Texas Instruments CD3217B13 USB type-C controller, Texas Instruments TPD4S311A USB type-C port protector

Product Usage Instructions

Step 1: Logic Board Front

  • This step involves identifying the key components on the logic board front, including the processor, memory, and power management units.

Step 2: Power Management Components

  • Identify and understand the various power management components such as converters and regulators present on the device.

Step 3: Logic Board Front Connectivity Chips

  • Learn about the connectivity chips like the WiFi/Bluetooth module located on the logic board front.

Step 4: Logic Board Back

  • Explore the components on the back of the logic board, including audio codec, multiplexer/demultiplexer, and converters.

Step 5: Additional Components

  • Identify components like the comparator and current limit switch on the device.

Step 6: Charging Board Front

  • Understand the charging board components such as the microcontroller, flash memory, and converters located in the battery pack.

Step 7: Charging Board Front Sensors

  • Learn about sensors like accelerometers present on the charging board front.

Step 8: Charging Board Back

  • Explore components like the buck-boost battery charger and voltage regulator located on the back of the charging board.

Step 9: Charging Board Back Sensors

  • Identify temperature sensors located at the back of the charging board.

Step 10: Right Speaker Board

  • Understand components such as audio codec, audio amplifier, and converters present on the right speaker board.
  • To reassemble your device, follow these instructions in reverse order.

Frequently Asked Questions (FAQ)

Q: How do I identify the logic board front on the device?

  • A: The logic board front typically houses components like the processor, memory, and power management units. It is usually located in the main body of the device.

Q: What are some key components on the charging board front?

  • A: The charging board front may include a microcontroller, flash memory, USB type-C controller, and various converters for charging purposes.

INTRODUCTION

  • This guide contains a selection of photos and a chip identification summary for the Apple Vision Pro headset.
  • Special thanks to community member CChin for his contribution!

Step 1 — Logic board frontIFIXIT-APL1109Apple-Vision-Pro-Chip-ID-
FIG-1

  • Apple APL1109/339S01081E M2 octa-core applications processor & graphics processing unit
  • Micron MT62F1G64D8WT-031 XT: B 8 GB LPDDR5 SDRAM memory
  • Apple APL1W08/339S01186 R1 sensor coprocessor
  • Kioxia K5A4RC2097 256 GB NAND flash
  • Apple APL109C/343S00627 power management
  • Apple APL109D/343S00628 power management
  • Apple APL1004/343S00629 power management

Step 2

  • Apple 338S00521-B0 power management
  • Texas Instruments LMK1C1104 clock buffer
  • Analog Devices LT8652S 8.5 A / 18 V dual channel synchronous step-down converter
  • Texas Instruments TPS62125 300 mA buck converter
  • Texas Instruments TPS61045 adjustable boost converter on semi FPF2895C current limit switch
  • Texas Instruments TPS70936 150 mA / 3.6 V LDO regulatorIFIXIT-APL1109Apple-Vision-Pro-Chip-ID-FIG-2

Step 3 — Logic board front connectivity chipsIFIXIT-APL1109Apple-Vision-
Pro-Chip-ID-FIG-3

  • USI 339S01015 WiFi/Bluetooth module

Step 4 — Logic board backIFIXIT-APL1109Apple-Vision-Pro-Chip-ID-
FIG-4

  • Analog Devices TMC5072 dual 2-phase stepper motor driver
  • Lattice Semiconductor ICE5LP4K iCE40 Ultra FPGA
  • Likely Cirrus Logic CS46L11 audio codec
  • Diodes Incorporated PI2DBS16212A 2:1 multiplexer/demultiplexer
  • Texas Instruments TMUX1575 quad SPDT analog switch
  • Texas Instruments TS5A23159 dual SPDT analog switch
  • Texas Instruments TPS62135 4 A step-down converter

Step 5IFIXIT-APL1109Apple-Vision-Pro-Chip-ID-FIG-5

  • Texas Instruments TLV6703 comparator w/ integrated reference
  • onsemi FPF2895C current limit switch

Step 6 — Charging board frontIFIXIT-APL1109Apple-Vision-Pro-Chip-ID-
FIG-6

  • This charging board is positioned in the battery pack.
  • STMicroelectronics STM32L4A6VG Arm Cortex-M4 microcontroller
  • GigaDevice GD25Q80E 1 MB serial NOR flash memory
  • Texas Instruments CD3217B13 USB type-C controller
  • Texas Instruments TPD4S311A USB type-C port protector
  • Texas Instruments TPS62180 6 A synchronous buck converter
  • Texas Instruments TPS62160 1 A step-down converter
  • onsemi FPF2895C current limit switch

Step 7 — Charging board front sensorsIFIXIT-APL1109Apple-Vision-Pro-Chip-
ID-FIG-7

Step 8 — Charging board backIFIXIT-APL1109Apple-Vision-Pro-Chip-ID-
FIG-8

  • Renesas ISL9238C buck-boost battery charger
  • Renesas RAA489800 bidirectional buck-boost voltage regulator

Step 9 — Charging board back sensorsIFIXIT-APL1109Apple-Vision-Pro-Chip-
ID-FIG-9

  • Texas Instruments TMP103A temperature sensor
  • Texas Instruments TMP103B temperature sensor

Step 10 — Right speaker boardIFIXIT-APL1109Apple-Vision-Pro-Chip-ID-
FIG-10

  • Likely Cirrus Logic CS46L11 audio codec
  • Texas Instruments SN02776B0A audio amplifier
  • Texas Instruments TPS62135 4 A step-down converter
  • To reassemble your device, follow these instructions in reverse order.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

IFIXIT User Manuals

Related Manuals