Panasonic TX-L50EM5E LCD Television Owner’s Manual
- May 15, 2024
- Panasonic
Table of Contents
Panasonic TX-L50EM5E LCD Television
Specifications
- Power Source : 220-240V AC, 50 / 60Hz
- Rated Power Consumption : 97W
- Stand-by Power Consumption: 0.25W
- Aerial Impedance : 75 unbalanced, Coaxial Type
- Receiving System :
- DVB-T DVB-C PAL I/H, B/G, SECAM B/G, L/L’
- PAL D/K, SECAM D/K
- PAL 525/60 M.NTSC NTSC
- Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264))
- Digital cable services (MPEG2 and MPEG4-AVC(H.264))
- VHF E2-E12, VHF A-H (ITALY), CATV (S01-S05), CATV S11-S20 (U1-U10)
- VHF H1-H2 (ITALY), UHF E21-E69, CATV S1-S10(M1-M10), CATV S21-S41 (HYPERBAND)
- VHF R1-R2, VHF R6-R12 (AV only), VHF R3-R5, UHF E21-E69
- Aerial Input : VHF / UHF
Product Usage Instructions
Power Connection
1. Plug the TV into a power outlet with the provided power cord.
2. Ensure the power source matches the specifications mentioned (220-240V AC, 50/60Hz).
Aerial Connection
1. Connect your aerial cable to the specified aerial input on the TV.
2. Make sure the aerial impedance is 75 unbalanced coaxial type.
Turning On the TV
Press the power button on the TV or remote control to turn on the television.
FAQ
- Q: What should I do if the TV does not turn on?
- A : Check the power connection and ensure the power outlet is functioning. Try using a different power outlet or power cord.
- Q: How do I switch between different receiving systems?
- A : Use the remote control to access the TV menu and navigate to the settings where you can select the desired receiving system.
Specifications
- Power Source : 220-240V AC, 50 / 60Hz
- Rated Power Consumption : 97W
- Stand-by Power Consumption: 0.25W
- Aerial Impedance : 75 unbalanced, Coaxial Type
- Receiving System:
- DVB-T Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264))
- DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264))
- PAL I/H, B/G,SECAM B/G, L/L’
- VHF E2-E12 VHF H1-H2 ( ITALY )
- VHF A-H ( ITALY ) UHF E21-E69
- CATV (S01-S05) CATV S1-S10(M1-M10)
- CATV S11-S20 (U1-U10) CATV S21-S41 (HYPERBAND)
- PAL D/K,
- SECAM D/K
- VHF R1-R2 /VHF R3-R5
- VHF R6-R12/ UHF E21-E69
- PAL 525/60 (AV only)
- M.NTSC (AV only)
- NTSC (AV only)
- Aerial Input : VHF / UHF
- Operating Conditions: Temperature: 0°C 35°C
- Humidity : 20% 80% RH (non condensing)
Parts Location
NOTE:
The numbers on the exploded view below refer to the exploded view section of
the Replacement Parts List.
NOTE:
The numbers on the exploded view below refer to the exploded view section of
the Replacement Parts L
Replacement Parts List
- Important Safety Notice
- Components Identified by mark have special characteristics important for safety.
- When replacing any of these components, use only the manufacturer’s specified parts.
- In case of ordering these spare parts, please always add the complete Model-Type number to your order.
RTL (Retention Time Limited)
Note : The marking (RTL) indicates that the Retention Time is Limited for this item. After the discontinuation of this assembly in production, the item will continue to be available for a specific period of time. The retention period of availability is dependent on the type of assembly, and in accordance with the laws governing part and product retention. After the end of this period, the assembly will no longer be available.
The marking (X) indicates that the board should be exchanged for service.
