CREALITY HD 1080P Web Camera User Manual
- June 4, 2024
- Creality
Table of Contents
HD 1080P Web Camera
User Manual
Shenzhen Creality Technology Co., Ltd
Parts list
Note : It’s recommended to use this camera with a Creality box.
Creality Box Parts List
Note : External devices, need to purchase separately.
Machine introduction
CREALITY BOX
1. RJ45 network port | 6. Yellow light: WIFI working status |
---|---|
2. Connect printer/camera | 7. Blue light: Ethernet indicator |
3. Micro USB power interface | 8. Green light: Cloud/distribution network |
indicator
4. TF card connector| 9. Red light: TF card indicator
5. Reset button|
HD 1080P Web Camera
Align the tripod with the screw hole at the bottom of the camera and tighten it.
-
Indicator
-
Camera
-
Support fixing hole
-
Ventilation hole
-
Rotation axis
-
When the blue light is on, it means the camera has started to work.
-
The camera can realize the rotation function through manual adjustment.
Assembly procedure
CREALITY BOX
-
When the yellow light flashes, it means the box has started to work.
-
When the red light is always on, it means that the TF card is not inserted.
-
When the green light flashes, it means that the mobile phone network configuration information has been received, and the steady light means it is not connected to the cloud.
-
Insert the TF card (FAT32/exFAT format) into the TF card connector of the box.
-
Connect the printer’s MINI/MicroUSB port and the box’s USB1/USB2 port with the USB communication cable equipped with the printer, and turn on the printer’s power switch to power on the machine.
Note : The output specification of the power adapter is 5V 2.4A (≥2A); after power on, if the box cannot be used normally due to the wrong configuration, press and hold the reset button for more than 5 seconds until the factory settings are restored and the network is reconfigured through the “Creative Cloud” APP. -
Plug one end of the USB cable into the 5V/2.4A the connector of the box, connect the other end to the power adapter and turn on the power to power up the box, then
connect to the network via wired or wireless.
-
Open the mobile app store and search for “Creality Cloud” or scan the QR code on the product box to download the “Creality Cloud” APP, register and login to your account, click “Device” → “+”, scan the QR code on the back of the box to add the corresponding box.
-
Connect the box WIFI to configure the network, you can use APP to print remotely after the box shows online.
-
Plug the USB connector of the camera into the USB1/USB2 connector of the WIFI box, open the “Creality Cloud” APP and click the camera icon “ ” on the device page to remotely monitor the printing status in real-time.
SHENZHEN
CREALITY 3D TECHNOLOGY CO.LTG
Add:18F’JinXIUHONGDU Building Meilong Blvd
Longhua Dist., Shenzhen, China 518131
Official Website:www.creality.com
Tel: +86 755-8523 4565
E-mail:info@creality.com
cs@creality.com
3D Printing Industry Evangelist
Documents / Resources
|
CREALITY HD 1080P Web
Camera
[pdf] User Manual
HD 1080P Web Camera, HD 1080P, Web Camera, Camera
---|---