Lordear SLF16006Z High Pressure Shower System 10 Inch Shower Faucet Set Installation Guide

Lordear SLF16006Z High Pressure Shower System 10 Inch Shower Faucet Set

INSTALLATION INSTRUCTIONS

Ceiling Mounted Installation

Parts

Item No.| Product Name| QTY| Item No.| Product Name| QTY
---|---|---|---|---|---
1| Rain Shower Head| 1 PC| 7| Embedded Box| 1 PC
2| Shower Arm| 1 PC| 8| Embedded Box Cover| 1 PC
3| Cover Board| 2 PCS| 9| Handle| 1 PC
4| Elbow With Hook| 1 PC| 10| Diverter handle| 1PC
5| Handheld Shower Head| 1 PC| 11| Nails Bag & Allen-Key| 1 BAG
6| Shower Hose| 1 PC| 12| Accessories Bag| 1 BAG

Essential accessories list

WARNING: Choking hazard. Keep all small parts and plastic bags out of the reach of children.

Prepare the wall for installation

(Note: The depth provided is for reference only. Please determine the installation depth based on the actual thickness of tiles.)

Tips : Embedded box can be cut to flush with tiles before trim installation
(Distance from back of valve body to finish surface to be between 2.6-3.4 inches)

Step 1: Install the Embedded box

Tips: Don’t remove the transparent protective cover when installing.

Mark position

Drill hole

Insert nylon plug

Fix the embedded box

Step 2 :Connect the water pipes with the embedded box
Tips: Clean the water pipe to avoid any blockage, A 1/2 inch male NPT fitting connection to be made with pipe thread sealant, do not over-tighten.

Step 3: Remove the protective cover

Step 4 : Install the handle to test the water
Tips: Test the outlet of the Rain shower head and handheld shower head.

Step 5 : Remove the handle, Install the transparent protective cover and finish the wall decoration.

Step 6 : Remove the transparent protective cover

Step 7 : Put the embedded box cover on and fix the handle

Step 8 : Install the elbow with hook

Step 9 : Connect the shower hose and handheld shower head

Tips: Please check whether the washer is inside the shower hose or not. If yes, connect directly;if no, take it from the accessories bag and put it in before connection to avoid a leak.

Step 10 : Install shower arm and rain shower head

Clean and maintain product

1. How to clean the shower head :

• A. Rub the nozzles with your fingers or toothbrush to loosen deposits, then run hot water for a while.
• B. Put the shower head in a pot,fill it with enough white vinegar or Detergent to cover the shower head. Then soak it for 30 minutes or longer.
• C. Use a high-quality microfiber cloth and gently wipe over the surface, then rinse with warm water.Finally, use a dry chamois or paper towel to gently remove any residue.

Warm Tips
If you feel the flow is too small, you can take out the water restrictor accordingly.

Guarantee Repairs Claims

1. During the warranty period, LORDEAR is responsible for free repairs of any defective products and missing parts.
2. Payment is needed for replacement if the Malfunction and damage are caused by the following situations even within the warranty period:
3. Improper use, unauthorized repair or reconstruction (including throwing or beating);
4. Failure to follow the installation manual (including unprofessional installation by a plumber) ;
5. Removal after installation or other factors;
6. Usage beyond the specified scope.
7. The recommended water temperature for the hand shower and rain shower head is ≤42°C, with a water pressure of 0.1-0.3 Mpa. The highest suggested temperature should not exceed 70°C, with a water pressure of 0.05-0.5 Mpa. Therefore, it is advised to keep any product equipped with a shower away from the heater to avoid potential risks.

THANK YOU FOR SHOPPING WITH US!
PLEASE DO NOT RETRUN TO THE STORE! PLEASE CHECK ALL THE ACCESSORIES BEFORE INSTALLATION.
Tips: If there is any questions for the products, please feel free to contact us. We will solve it the first time.
For quick and better to solve problems for you,
Required information is a MUST：

1. Where you buy
2. PO Number/Tracking number
3. SKU Number
4. Problem to Clarify
5. Picture/Video

Email:[email protected] Tel: (+1)7053009828

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>