Remixori CAL005UKON Shower Mixer Set Adjustable Shower System User Manual

Remixori CAL005UKON Shower Mixer Set Adjustable Shower System

Specifications

• 2x SUS connector
• 3x Rubber washer (2 transparent & 1 black)
• 1x Wall connector
• 1x Installation fitting accessory bag
• 1x Shower bracket
• 1x User manual

Installation Steps

1. Install the shower set main body

   • Determine the position of the shower set main body and connect it with hot and cold water pipes using the SUS connectors.
   • Screw in the caps to the connectors.
   • Insert transparent rubber washers into the rotary knob of the main body.
   • Connect the shower set main body to the SUS connectors.

2. Install the shower rod

   • Place the black rubber washer into the inlet of the straight shower rod connected to the valve.
   • Attach the shower rod to the shower set main body.
   • Insert the straight shower rod into the hand shower bracket and adjust the height as needed.

3. Determine the position of shower rod wall connector and
   install it to the wall.

4. Connect the wall connector to the wall-mounted holder
   and secure it with screws.

5. Install the overhead shower head.

6. Install the hand shower.

7. Finish the installation.

Shower Mixer Set

User Manual

Before Installation
Please read the instructions and check package list carefully before installing the product.

Package List

WARNING
Choking hazard.
Please keep all small parts ans plastic bags out of the reach of children.

Package include

• 1x Shower set main body 2x SUS connector
• 1x 90°shower rod 3x Rubber washer(2 transparent & 1 black)
• 1x 27.5″ shower rod 1x Wall connector
• 1x Hand Shower 1x Installation fitting accessory bag
• 1x Overhead Shower Head 1x Shower bracket
• 1x 57.8″ flexible Hose 1x User manual
• 2x Caps

Instruction Steps

1. Install the shower set main body

   • Determine the position of the shower set main body,the valve should be connected with hot and cold water pipe,if only connect one, there is no water comes out. Firstly install the SUS connectors to the wall and connect it with hot and cold water pipe outlets

   • Install the shower rod to the shower set main body

   • Put the transparent rubber washers into the rotary knob of the main body
     

   • Screw in and connect the shower set main body to the SUS connectors

Install the shower rod

• Find the black rubber washer and put it into the inlet of the straight shower rod which is connected with the valve
• Install the shower rod to the shower set main body
• Insert the straight shower rod to the hand shower bracket,you can adujst the height of the bracket by pressing the button on the bracket(pls notice the direction of the bracket)
• Screw in and connect the 90 ° shower rod to the straight shower rod,then fixed the wall mounted holder

 Determine the postion of shower rod wall connector and install it to the

wall firstly

• Connect the wall connector to the wall mounted holder,screw in the screws to the connector by small rocket screwdriver tightly for fixing
• Install the overhead shower head
• Install the hand shower
• Finish the installation

How to Use

1.  Select hand shower or overhead shower mode
   

2.  Adjust the temperature of water , Hot/ Thermostatic 38°/Cold

3. Select the water way of the hand shower by pressing the button on the hand shower.There are 3 water ways can be chosen

Warning Tips:

1. Each connection part must be securely connected
2.  All of the joints must be installed with rubber washers
3. After installation, please make a test to check whether the connectors are leaking or installed incorrectly

Cleaning and Maintenance

1. Simply wipe the nozzle with your finger or toothbrush to loosen any deposits, then run hot water for a few minutes
2. Place the showerhead in a pot. Consider using a smaller container that just fits the shower head You can also use a small bucket or plastic bin.
   Fill the pot with enough white vinegar to cover the shower head. The acid in the vinegar helps dissolve the white mineral deposits on the showerhead.
   Let the showerhead soak in the vinegar for 30 minutes. The dirtier the showerhead, the longer you must leave it in the vinegar.

Maintenance of chrome and brushed nickel finished products

1. To clean the product, all you need is a good quality microfiber cloth.
2.  Apply a good quality chrome cleaner to a clean cotton cloth and wipe down the chrome. Leave according to product instructions and then rinse well with warm water. Use a dry chamois or paper towel to gently remove any product residue.
3. How to clean chrome: Homemade solutions
   In addition to professional products, try this shortcut to achieve cleaning chrome: detergent and warm water! Immerse the chrome-plated object in a sink filled with warm water. Add half a cup of good quality detergent and wipe gently with a soft cotton cloth to avoid scratching the chrome to complete the cleaning.
   If you are experiencing a leak, it may have been installed improperly. The solution is as below:

• If the hose is leaking, put black washers in the ends of the hose to prevent leaks.
• If the shower arm is leaking, it may be due to a short thread on the shower arm. Place a spare washer over the mesh washer on the bracket nut to prevent leaks.
• If the bracket is leaking, it could possible be due to the white plastic open O-ring of the bracket became loose during the long-term transit. You will need to reinstall the bracket.

Warranty and Support

We provide 1 year warranty, 30 days free return and refund for our products from the date of purchase.

• What’s covered?
  Defects due to faulty materials and workmanship of the product.

• What’s NOT covered?

1. Damage caused by the owner when attempting to fix or alter the product by himself or herself.
2. Damage caused by misuse, abuse, neglect, alterations or unauthorized repair.
3. Natural depreciation.

• How to request warranty services?
  The warranty comes to effect from the date of your purchase, we have records on our system. We don’t provide warranty card for environmental purpose.
  If any questions,please kindly find customer service. Our customer service will address your issue in 24 hours.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>