TransOurDream TRANS-07 Tru-Heat Transfer Paper for Dark T Shirts and Fabrics User Manual

Trans Our Dream TRANS-07 Tru-Heat Transfer Paper for Dark T Shirts and Fabrics User Manual

Preparation

• T-shirt

• Scissors

• Iron

• Heat Press Machine

• Inkjet Printer

• Transfer Paper
  

Preparation Before Transfer: T-shirt, Dark 1.0 Transfer Paper, Teflon Paper(in the pack), Inkjet Printer, Scissors/Cutting Machine, Iron/Easy Press/Professional Heat Press Machine.

NOTES: Please check if transfer paper has been bent or not clear before using it. If there is any problem with transfer paper, kindly let us know.

Printing

1. Complete below settings based on your printer brand. No mirror printing
   Brand| Paper Type| Paper Quality
   ---|---|---
   HP| Premium Matte Photo Paper| Normal or Best
   Epson| Plain Paper| Photo
   Canon| Standard-Shirt Transfer| Standard
   Other Brands| Plain Paper| High Quality

2. Print the image on the BLANK side.
   
   NOTES: Compatible with pigment ink, dye ink

3. After the image is dry, cut out your design with scissors or cutting machine, such as Circuit.
   

Transfer (Please refer to Step ③ for Iron/Easy Press/Heat Press Machine)

1. PEEL YOUR DESGIN from the backing LOGO paper.

NOTES: Transfer Paper is composed of two layers – The backing logo paper and the blank film.

2. REMOVE CREASES:
   
   Place your t-shirt on a solid and heat-resistant surface and smooth out creases with your ironing tool.

3. PLACE YOUR DESIGN:
   Place your image facing UPWARD onto t-shirt.

4. COVER WITH TEFLON PAPER.

5. **IRON

Set to HIGH TEMPERATURE ·Turn OFF steam
NOTES:
**
INSUFFICIENT PRESSURE and IRONING TIME would achieve POOR transfer result , the transfers may peel off.

1. Apply FIRM, EVEN and HEAVY pressure on each area of the image for 5 seconds.
2. Repeat and circularly press and iron the whole image  

3. Ensure that ALL areas of the image is ironed, especially the corners and edges. If the corner peels off, cover Teflon paper and heat press it for another 15~20 seconds.

HEAT PRESS MACHINE

• Set Temperature to 170℃(338°F).
• Set Time to 10 seconds.
• Apply MEDIUM Pressure.

**EASY HEAT PRESS

**

NOTES:
The temperature and time may vary based on different kinds of easy heat press and the printed image size. Suggest you do a test before transfer onto t-shirts.

1. Heat press the whole image slowly from one side to the other side.
2. Apply HEAVY pressure on each half of the image for 10 seconds, circularly iron the whole image 4 times.
   Image Size| Temperature| Ironing Time
   ---|---|---
   Full sheet| 170℃(338℉)| 70-90 seconds
   1/2 sheet| 170℃(338℉)| 45-65 seconds
   1/4 sheet| 170℃(338℉)| 20-30 seconds
3. Iron each corner for 15~20 seconds. If the corner peels off, cover Teflon paper and heat press it for another 15~20 seconds.

After ironing done, remove Teflon paper.
Congratulations! Your DIY image transfer has been done. Enjoy!

WASHING INSTRUCTIONS:

• Don’t wash within 48 hours after transfer.
• Wash the garment before wearing.
• Don’t use bleach or alkaline detergent.
• Turn garment inside out when washing.
• Full spin cycle, cold water washing.
• No delicate washing.
• No tumble dry.
• Remove garment promptly after washing , colors may bleed if left wet too long.
• Unfold image, hang to dry naturally.

STORAGE TIPS:

• Keep the image facing outside when fold the garment.
• Store the garment in a dry and cool place.
• Keep unused transfer paper sealed and preserved.

Website: www.transourdream.com
E-mail: customer-service@transourdream.com
For detailed video tutorial, please visit the following platforms:
SEARCH: Tran sour dream

References

• TransOurDream

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>