BaBylissPRO BNT9125TUC Professional Dual Ion Flat Iron Instruction Manual
- May 15, 2024
- BaBylissPRO
Table of Contents
- BaBylissPRO BNT9125TUC Professional Dual Ion Flat Iron
- Product Usage Instructions
- FAQ:
- IMPORTANT SAFETY INSTRUCTIONS
- OPERATING INSTRUCTIONS
- CONTROL YOUR IONS
- STYLING TIPS USING STRAIGHTENER
- NANO TITANIUM™
- GET TO KNOW YOUR DUAL ION FLAT IRON
- USER MAINTENANCE
- FEDERAL COMMUNICATIONS COMMISSION NOTICE
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BaBylissPRO BNT9125TUC Professional Dual Ion Flat Iron
Specifications:
- Intended Use: Professional or Household
- Power Supply: Alternating Current (50-60Hz)
- Voltage: 120-240V AC
- Plug Type: Polarized
- Dual Voltage: Automatically adjusts
- Heating Technology: Advanced Ceramic Heater
- Plate Material: Real Titanium
Product Usage Instructions
Safety Precautions
- Keep out of reach of children.
- Read all instructions before using.
- Keep away from water to avoid risks of burns, electrocution, fire, or injury.
- Save these instructions for future reference.
Operating Instructions
This flat iron is suitable for both professional and household use. Ensure to use it with alternating current (50-60Hz) at a voltage range of 120-240V AC. Follow the safety guidelines provided.
Using the Dual Ion Flat Iron:
- Plug the flat iron into a standard electrical outlet.
- Select the appropriate temperature setting based on your hair type using the provided chart.
- Section your dry hair evenly and gently straighten each part using the flat iron without touching the scalp.
- For styling tips and different looks, refer to the user manual for detailed instructions.
User Maintenance:
Your flat iron requires minimal maintenance. Keep vents clear of dirt and dust. If cleaning is needed, disconnect the unit, let it cool, and wipe the exterior with a cloth. Do not attempt repairs; contact an authorized service representative if needed.
FAQ:
Q: Can I use the flat iron on wet hair?
A: No, it is important to ensure that your hair is completely dry before using the flat iron to avoid any risks of burns or damage.
Q: How do I store the flat iron?
A: Make sure to turn off the unit and unplug it when not in use. Store it in a safe place away from water or heat sources.
IMPORTANT SAFETY INSTRUCTIONS
- When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including:
- KEEP OUT OF REACH OF CHILDREN!
- READ ALL INSTRUCTIONS BEFORE USING.
- KEEP AWAY FROM WATER!
DANGER – As with most
electrical appliances, parts are electrically live even when the switch is
off. To reduce the risk of death by electric shock:
- Always unplug immediately after using.
- Always turn off the iron when not in use.
- Do not use while bathing or in the shower.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquids.
- If the iron falls into water, unplug it immediately. Do not reach into the water.
WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
- Plug the iron into an electrical outlet.
- The iron should never be left unattended when plugged in.
- Do not pull, twist, or wrap cord around the iron.
- This iron should not be used by, on, or near children or individuals with certain disabilities.
- Use the iron only for its intended use as described in this guide.
- Do not use attachments not recommended by the manufacturer.
- Never operate this iron if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged or has fallen into water. Return the appliance to a service center for examination and repair.
- Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
- Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
- Never use while sleeping.
- Never drop or insert any object into any opening or hole in the iron.
- Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not use an extension cord with the iron. Avoid multiple cables to a plug.
- The iron and casing are hot when in use. Do not let eyes and bare skin touch heated surfaces.
- Do not place the iron directly on any surface while it is hot or plugged in.
- Do not touch hot surfaces of the iron.
- This iron has no user-serviceable parts. Servicing should only be performed by an authorized service representative.
- Suitable for dry locations ONLY.
- Ensure the iron has completely cooled before being placed into any storage.
- Do not use this appliance near bathtubs, showers, toilets, or any other receptacle containing water.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Before plugging in, read the information about dual voltage contained in the “DUAL VOLTAGE” section of this manual.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
This appliance is intended for professional or household use. Use on
alternating current (50-60Hz) only. Standard appliances are designed to
operate at 120-240V AC.
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit into a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
DUAL VOLTAGE
This flat iron has dual voltage. It will automatically adjust to the proper
voltage. Use an adapter plug (not included) with correct configuration, prior
to use in outlet.
CONTROL YOUR IONS
Dual ions work together to rebalance and smooth your hair. TURN THEM ON OR OFF
FOR STYLING FLEXIBILITY.
ON – Smooths and Reduces Frizz
OFF – Adds Body and Volume
STRAIGHTENING BASICS
- Plug the straightening iron into a standard electrical outlet. It is not necessary to touch the iron with your hand to judge readiness.
- Use the temperature controls to select the best setting for your hair type. You can use the chart below as a reference. The iron will heat up very quickly.
- Section dry hair evenly, and comb each section. Position the iron on the hair as far up as you want hair to be straightened, being careful not to let the iron touch the scalp. Close the iron with the hair between the two plates and gently pull the iron down to the end of the section of hair you are straightening. Repeat this process several times, if necessary. Let the hair cool before combing.
STYLING TIPS USING STRAIGHTENER
For short, spiky looks use gel or spray and hold the sections up and away from the head while you straighten. For smoothing and taming curly hair, or creating a stylish, smooth bob, use the straightener just on the ends, leaving the hair wavy at the roots for lift and body. For this type of effect, keep the straightener moving while following the shape of your hairstyle.
NANO TITANIUM™
Your Nano Titanium™ straightening iron has many benefits. Titanium is an exceptional conductor of heat and is stable in ultra-high temperatures. The titanium-plating technology helps provide the ultimate heat performance for beautiful, healthy-looking hair. Titanium’s lightweight and smooth surface helps reduce straightening time and hand fatigue and is exceptionally resistant to chemical corrosion. This Nano Titanium™ iron will give your hair a smooth, silky shine while eliminating frizz.
GET TO KNOW YOUR DUAL ION FLAT IRON
Model BNT9125TUC – 1¼”
NOTE: LOCKING BUTTON IS FOR STORAGE ONLY
NOTICE
THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART
TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN
ONE MINUTE.
DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF
POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED.
TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.
USER MAINTENANCE
Your iron is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, let it cool, and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power-supply cord to be pulled or twisted. Never wrap the cord
around the unit. Damage will occur at the high flex point of entry into the
unit, causing it to rupture and short circuit. Inspect the cord frequently for
damage. Stop use immediately if damage is visible or if unit stops or operates
intermittently.
STORAGE
When not in use, your appliance is easy to store. Allow unit to cool, then
simply put back in the box, and store out of reach of children in a safe, dry
location. Do not jerk or strain cord at plug connections.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SUPPLIER’S DECLARATION OF CONFORMITY
Brand: BaBylissPRO®
Model No.: BNT9125TUC
Description: Dual Ion Flat Iron
Responsible Party: Conair LLC 1 Cummings Point Road Stamford, CT 06902
203-351-9000
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
DATE OF ISSUE: 03/31/2022
WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination, but did
you know that an electrical appliance is still electrically live even if the
switch is off? If the plug is in, the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES
PROFESSIONAL DUAL ION FLAT IRON
FOR PROFESSIONAL USE ONLY
PLANCHA ALISADORA
PROFESIONAL
POUR USAGE PROFESSIONNEL UNIQUEMENT
Model/Modelo/Modèle
BNT9125TUC
For your safety and continued enjoyment of this product, always read the
instruction book carefully before using.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>