BABYLISSPRO BNT3000TUZ Hair Straightener User Manual

: October 30, 2023
: BaBylissPRO

Table of Contents

BABYLISSPRO BNT3000TUZ Hair Straightener
Product Information
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
OPERATING INSTRUCTIONS
Overview
USER MAINTENANCE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BABYLISSPRO BNT3000TUZ Hair Straightener

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

Product Information

The product is an electrical appliance that requires basic safety precautions to be followed at all times. The appliance can be dangerous if not used properly and can cause burns, electrocution, fire, or injury to persons. It is essential to read all instructions before using the appliance and keep it away from water. The appliance should be used only for its intended use, as described in the manual. Do not use attachments not recommended by the manufacturer, and do not use an extension cord to operate the appliance. The appliance should never be left unattended when plugged in and should be kept out of reach of children.

Product Usage Instructions

Read all instructions before using the appliance.
Keep the appliance away from water and heated surfaces.
Unplug the appliance immediately after using it.
Do not use the appliance while bathing or in the shower.
Do not place or store the appliance where it can fall or be pulled into a tub or sink.
Do not place in, or drop into, water or any other liquid. If the appliance falls into water, unplug it immediately. Do not reach into the water.
Do not pull, twist, or wrap line cord around the appliance.
The appliance should not be used by, on, or near children or individuals with certain disabilities.
The appliance should be used only for its intended use, as described in the manual.
Never operate the appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
Never use the appliance while sleeping.
Never drop or insert any object into any opening.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
The appliance is hot when in use. Do not let heated surfaces touch eyes or skin. Use handles or knobs instead.
Do not place the appliance on any surface while it is operating.
Do not use this appliance near bathtubs, showers, toilets, or any other recipient containing water.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.
Before plugging in, read the information about dual voltage contained in the DUAL VOLTAGE section of this manual.
When the appliance is used in the bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
For additional protection, the installation of a residual current device (RCD), having a rated residual operating current not exceeding 30mA, is advisable in the electrical circuit supplying the bathroom. Ask your electrician for advice.
Always place the appliance with the stand, if any, on a heat-resistant, stable flat surface.

Following these instructions will help ensure safe and proper usage of the appliance. Save these instructions for future reference.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER

DANGER: Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

Always unplug appliance immediately after using.
Do not use while bathing or in the shower.
Do not place or store appliance where it can fall or be pulled into a tub or sink.
Do not place in, or drop into, water or any other liquid.
If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:

This appliance should never be left unattended when plugged in.
Do not pull, twist, or wrap line cord around appliance.
This appliance should not be used by, on, or near children or individuals with certain disabilities.
Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer. Do not use an extension cord to operate appliance.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
Keep the cord away from heated surfaces.
Never use while sleeping.
Never drop or insert any object into any opening.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not use an extension cord with this appliance.
This appliance is hot when in use. Do not let heated surfaces touch eyes or skin.
Do not place the appliance on any surface while it is operating.
Do not touch hot surfaces of the appliance; use handles or knobs.
Do not use this appliance near bathtubs, showers, toilets or any other recipient containing water.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before plugging in, read the information about dual voltage contained in the “DUAL VOLTAGE” section of this manual.
When the appliance is used in bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off.
For additional protection, the installation of a residual current device (RCD), having a rated residual operating current not exceeding 30mA, is advisable in the electrical circuit supplying the bathroom. Ask your electrician for advice.

SAVE THESE INSTRUCTIONS

SAFETY INSTRUCTIONS

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Burn Hazard. Keep appliance out of reach from young children, particularly during use and cool down.
When the appliance is connected to the power supply, never leave it unattended.
Always place the appliance with the stand, if any, on a heat-resistant, stable flat surface.

DUAL VOLTAGE

This flat iron has dual voltage. It will automatically adjust to the proper voltage. Use an adapter plug (not included) with correct configuration, prior to use in outlet.

OPERATING INSTRUCTIONS

This appliance is intended for professional or household use. Use on Alternating Current (50-60Hz) only. Standard appliances are designed to operate at 120-240V~.

STRAIGHTENING BASICS

Plug the straightening iron into a standard electrical outlet (120-240V~). It is not necessary to touch the iron with your hand to judge readiness.
Use the +/- temperature controls to select the setting for your hair type. You can use the chart outlined below as a reference. The iron will heat up very quickly.
TEMPERATURE SETTINGS| HAIR TYPE
---|---
300ºF (150ºC)

(Use lower temperatures for chemically treated hair)

| Fragile, very fine hair
340°F (170°C)

(Use lower temperatures for chemically treated hair)

| Thin, easy-to-straighten hair
380°F (195°C)

(Use lower temperatures for chemically treated hair)

| Normal textured hair
410°F (210°C)| Wavy or curly hair
465°F (240°C)| Coarse, very thick hair
3. Section dry hair evenly, and comb each section. Position the iron on the hair as far up as you want hair to be straightened, being careful not to let the iron touch the scalp. Close the iron with the hair between the two plates and gently pull the iron down to the end of the section of hair you are straightening. Repeat this process several times, if necessary. Let the hair cool before combing.

STYLING TIPS USING A STRAIGHTENER

For short, spiky looks use gel or spray and hold the sections up and away from the head while you straighten.
For smoothing and taming curly hair, or creating a stylish, smooth bob, use the straightener just on the ends, leaving the hair wavy at the roots for lift and body. For this type of effect, keep the straightener moving while following the shape of your hairstyle.
For looser waves, close and lock the iron and use it as a wand. Wrap hair around the front housing and hold for a few seconds to create a looser, free-flowing wave.
For tighter curls, turn iron 180° (top-down) and start close to the root or wherever you want the curl to start. Lightly hold hair between plates and turn the iron as you move it down the strand. The slower the turn, the tighter the curl. Adjust the angle to create different types of curls.
For zig-zag styles, open the iron, wrap hair around plates/ housing in a figure 8, hold for a few seconds and release.
For flip and bend waves, turn the iron as you reach the end of hair strand – inward or outward – to create a flip, bend or more body.
For ideal results, use finishing sprays after styling, if desired. Unprecedented performance, design, and versatility – the OPTIMA3000™ by BaBylissPRO™.

NANO TITANIUM

Your Nano Titanium straightening iron has many benefits. Titanium is an exceptional conductor of heat and is stable in ultra-high temperatures. The titanium plating technology helps provide the ultimate heat performance for beautiful, healthy-looking hair. Titanium’s light weight and smooth surface helps reduce time and fatigue and is exceptionally resistant to chemical corrosion. This Nano Titanium iron will give your hair a smooth, silky shine while eliminating frizz.

Overview

GET TO KNOW YOUR PROFESSIONAL STRAIGHTENER

Press and Release to Turn On. Press and Hold for a second to Turn Off.

NOTICE

THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN ONE MINUTE.
DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED.
TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.

USER MAINTENANCE

Your iron is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, and wipe exterior with a damp cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord around the unit. Damage will occur at the high flex point of entry into the unit, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

STORAGE

When not in use, your appliance is easy to store. Allow unit to cool, then simply put back in the box, and store out of reach of children in safe, dry location. Do not jerk or strain cord at plug connections.

WARNING: IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.

KEEP AWAY FROM WATER.
Everyone knows that electricity and water are a dangerous combination, but did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES.

IMPORTED INTO BOLIVIA BY