tp-link HS220 Smart Wi-Fi Light Switch Dimmer User Guide

tp-link HS220 Smart Wi-Fi Light Switch Dimmer

Product Information

Specifications

• Product: Kasa Smart Wi-Fi Light Switch, Dimmer

• Compatibility: Incandescent, LED, Halogen, and compact
  fluorescent light bulbs

• Control: Remote control via Kasa Smart app

• Dimming Range: 1% to 100%

Product Usage Instructions:

Set Up Your Smart Light Switch
Follow these steps to set up your Smart Light Switch:

1. Download and install the Kasa Smart app from Google Play or the App Store.
2. Log in or sign up with your TP-Link ID.
3. Add your device to the app.

Main Device Controls
After setting up your Smart Light Switch, you can control it using the Kasa Smart app:

• Home Page: Turn on/off your device directly from the home page.
• Status Page: Change light brightness, set schedules, timers, and check runtime from the status page.

Set Schedules and Timers
You can automate your lighting with schedules and timers:

• Set Schedules: Program your dimmer switch to turn on/off at specific times based on your routine.
• Set a Timer: Configure a timer to automatically control the switch after a set duration.

Set Away Mode and Check Runtime
Enhance security and monitor usage:

• Set Away Mode: Simulate presence by randomly turning lights on/off when you’re away.
• Check Runtime: Monitor how long your dimmer switch has been in operation.

Frequently Asked Questions (FAQ)

• Q: Can I use the Kasa Smart Wi-Fi Light Switch, Dimmer with any type of light bulb?
  A: The dimmer switch is compatible with incandescent, LED, Halogen, and compact fluorescent light bulbs.

• Q: How do I reset the Wi-Fi connection on the Smart Light Switch?
  A: Press and hold the RESET button for about 5 seconds to reset the Wi-Fi while keeping other settings. Press and hold for about 10 seconds to restore factory default settings.

About This Guide
This guide provides a brief introduction to Kasa Smart Wi-Fi Light Switch, Dimmer and the Kasa Smart app, as well as regulatory information.
Features available in Kasa Smart may vary by model and software version. Kasa Smart availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Kasa Smart experience.

Conventions
In this guide, the following convention is used:

menus, items, buttons and so on.
Underline| Hyperlinks are in teal and underlined. You can click to redirect to a website.

More Info

• Specifications can be found on the product page at https://www.tp-link.com.
• Our Technical Support contact information can be found at the Help center of the Kasa Smart app and the Contact Technical Support page at https://www.tp-link.com/support.

Introduction

Control your home lighting from anywhere, anytime with the Kasa Smart app. Easily dim your lights from 1% to 100%.

• Smart Dimming – Adjust your home’s brightness freely using the Kasa Smart app, built-in dimmer buttons, and voice commands via Alexa or Google Assistant. With the Fade On/Off feature, smoothly adjust lighting levels without sudden eye-irritating brightness or darkness.
• Brightness Control – Control the brightness of your lights to set the perfect ambiance for any activity.
• Voice Control – Use simple voice commands to control the lights with Alexa or Google Assistant.
• Remote Control – Control anything connected to your smart light switch, like lights, ceiling fans or other fixtures, from anywhere using the Kasa Smart app.
• Set Schedules – Set your dimmer to automatically turn on and off while you’re home or away.
• UL Certified – Housed with V-0 (UL94) flame-retardant material, the smart light switch is UL listed for safety use.
• Away Mode – Set your smart light switch to turn connected fixtures on and off at random intervals to give the appearance you’re home even while you’re away.
• Delayed Shutoff – Set your lights to remain on for a predetermined period of time after they are turned off so that you have time to exit the room.
• Group & Scene – Group your smart switch with other smart devices to control them all at once. Set custom scenes to match any occasion like waking up.
• No Hub Required – Connect to your existing Wi-Fi router.

Appearance

The dimmer switch is compatible with incandescent, LED, Halogen, and compact fluorescent light bulbs. The following picture uses the white color switch as an example. See the explanation below:

Set Up Your Smart Light Switch

Follow the steps below to set up your Smart Light Switch via Kasa Smart app.

1. Download and install Kasa app
   Go to Google Play or the App Store or scan the QR code below to download the Kasa Smart app on your Android or iOS smartphone or tablet.

2. Log in or sign up with TP-Link ID
   Open the app. Use your TP-Link ID to log in.
   If you don’t have a TP-Link ID, tap Create Account and the Kasa Smart app will guide you through the rest.

3. Add Device
   Tap the + button in the Kasa Smart app,

   • If your device is white, select Smart Switches > Smart Switch (Wi-Fi).
   • If your device is almond, select Smart Switches > Smart Switch (BLE). Then follow app instructions to complete setup.

Main Device Controls

After you successfully set up your Smart Light Switch, you will see the home page of the Kasa Smart app. Here you can view and manage all devices that you’ve added to Kasa. Tap your smart switch to control and manage it.

Home Page
Turn on/off your device on the Home page.

Status Page
Turn on/off your device, change light brightness, or set schedules, timer, Away Mode or check runtime on the Status page.

Set Schedules
Set schedules to automatically turn on/off the light at set times according to your daily routine.

Set a Timer
Set the timer for your dimmer switch to automatically turn on/off after the time ends.

Set Away Mode
Set Away Mode for your dimmer switch to turn on/off the light automatically at random intervals while you are away to make the appearance that someone is at home.

Check Runtime
Check runtime to keep track of how long your dimmer switch has been working.

Manage Device Settings

1. Tap on the Status Page to enter the Device Settings page.

1. Edit device name and icon
   You can edit the device name and icon of your dimmer switch.

2. Set brightness presets
   Set preset brightness levels so you can switch to the desired brightness with just one tap. The presets will appear on the Status page of the light.
   

3. Set default state
   Set the state you want your device to turn to under different occasions.

4. Set fade on/off
   Set the fade on/off time for the light to reduce the strain on your eyes.
   

5. Control your device LED.
   Set the LED status.

6. Check Groups that your Smart Switch is in.
   Check whether your device is added to a group with other devices for simultaneous control.
   

Reset Your Smart Switch

You can remove your device from the Kasa Smart app on the Home page or on the Device Settings page, or by pressing the Reset button on your Smart Switch.

Home Page
Long press the fan or the light and then tap  . Double confirm it.

Device Status Page
Tap Remove Device. Double confirm it.

Press the Reset button
Press and hold the Reset for at least 10 seconds to restore factory default settings.

Authentication

FCC compliance information statement

• Product Name: Kasa Smart Wi-Fi Light Switch, Dimmer
• Model Number: HS220
• Responsible party:
• TP-Link USA Corporation
• Address: 10 Mauchly, Irvine, CA 92618
• Website: https://www.tp-link.com/us/
• Tel: +1 626 333 0234
• Fax: +1 909 527 6804
• E-mail : sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)

nt name a：tion (Type)

Kasa Smart Wi-Fi Light Switch, Dimmer HS220

Unit

PCB

|  |  |  |  |  |
(Pb)

○

| (Hg)

○

| (Cd)

○

| ch(rCorm+6iu)m

○

| bip(PhBeBn)yls

○

| diph(ePnByDl eEt)hers

○

 | ○| ○| ○| ○| ○| ○
 | —| ○| ○| ○| ○| ○
 | −| ○| ○| ○| ○| ○
 |  |  |  |  |  |

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• Operating temperature: 0℃ ~40℃ (32 ℉ ~104 ℉ ); Storage Temperature: -40℃~60℃ (-40 ℉ ~140 ℉ )

Follow all national and local safety regulations and practices. If you are uncertain or uncomfortable when performing the installation, consult a qualified electrician.

• Install only in a suitable UL or equivalent Listed outlet box.(suitable dimensions: W > 2.95in./75mm, H > 2.02in./51.2mm, D > 1.87in./47.5mm).
• CAUTION – Risk of electric Shock – More than one disconnect switch may be required to de-energize the equipment before servicing. A circuit breaker which disconnects the Live and Neutral conductor simultaneously is suitable. Ensure power is off at the circuit breaker before removing or installing any wall switch.
• Do not install the Smart Switch with wet hands or when standing on wet or damp surfaces.
• The Smart Switch must be installed and used in accordance with the National Electric Code (NEC) or your local electrical code. If you are unfamiliar with these codes and requirements, or are uncomfortable performing the installation, consult a qualified electrician.
• Timer could turn-on unexpectedly without the user being present. To Reduce the Hazardous Condition – Unplug the appliance from the receptacle before servicing.

CAUTION Electronic switch integrated in this product is only intended for functional purposes. De-energized the product at the circuit breaker before servicing.

CAUTION:
To Reduce the Risk of Electric Shock – Use Only Indoors.

USE ONLY IN DRY LOCATIONS.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

References

• Link: Simple, secure one-click payments
• WiFi Networking Equipment for Home & Business | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support
• WiFi Networking Equipment for Home & Business | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>