V-TAC VT-7981 LED Designer Ceiling Light Installation Guide
- July 4, 2024
- V TAC
Table of Contents
V-TAC VT-7981 LED Designer Ceiling Light
Product Usage Instructions
- Installation:
- Turn off the power supply before installation.
- Mount the ceiling light securely using the appropriate hardware.
- Connect the wires following the provided instructions.
- Maintenance:
- Regularly clean the surface of the light with a soft cloth.
- Avoid using harsh chemicals or abrasive materials for cleaning.
- Replacement:
- Only replace the control gear or LED light source with the help of a professional.
- Follow the manufacturer’s guidelines for replacement parts.
FAQs
- Q: Can I dim this ceiling light?
- A: No, this ceiling light is not dimmable as per the product specifications.
- Q: What is the recommended base size for this model?
- A: The recommended base size for this model is D250 mm.
- Q: How do I replace the LED light source?
- A: The LED light source should only be replaced by a professional to ensure proper installation and safety.
TECHNICAL DATA
| MODEL | VT-7981 |
|---|---|
| SKU | 23371 |
| WATTS | 36W |
| LUMENS | 4150 LM |
| BEAM ANGLE | 180° |
| MATERIAL | Metal |
| BASE SIZE | D250 mm |
| DIMENSION | L840xW600xH290 mm |
| INPUT POWER | AC220-240V,50/60Hz |
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Proper grounding should be ensured throughout the installation.
- For Indoor Use Only
- This marking indicates that this product should not be disposed of with other household wastes.
- Caution, risk of electric sho7ck.
FEATURES
INSTALLATION DIAGRAM
WIRING DIAGRAM
- Neutral Supply can be Blue or Black
- Ground Supply Can be Green-yellow
- Live Supply Can be Red or Brown
- Switch off the power before starting the installation.
- Use screws to fix the mounting bar to the junction box.
- Make the wire connections with connectors.
- Connect the live wire (L) from the fitting to the live wire from the main power supply.
- Connect the neutral wire (N) from the fitting to the neutral wire from the main power supply.
- Connect the earth wire from the fitting to the earth wire from the main power supply.
- Please pay close attention and make sure the wires are not exposed outside when wiring connections.
- Use screws to fix the canopy to the mounting bar.
- Check if the installation is completed and turn on the power.
- Note: This light is designed with adjustable height, press the pin on the canopy to adjust the height of the light.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCT RANGES, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
MORE INFO
- WARRANTY: 02 YEAR
- WEEE Number: 80133970