TOYZ Bounce Baby Step Walker User Manual

June 4, 2024
TOYZ

TOYZ Bounce Baby Step Walker

IMPORTANT! Please read these instructions carefully before the first use of the product. his manual should be kept for future use.

Thank you for choosing the Toyz by Caretero Bounce baby walker. You bought a modern, high-quality product. We are sure it will help your child in safe, harmonious growth. We encourage you to learn about our full offer on our website: www.toyz.pl Should you have any remarks about this product, feel free to share them with us.

LIST OF PARTS IN THE BOX

  • Top section 1 piece
  • seat with upholstery 1 piece
  • seat frame 1 piece
  • toy bar 1 piece

WARNING: Before assembling the baby walker, please check if all listed parts are present in the box.

  1. top section

  2. backrest

  3. seat with upholstery

  4. seat frame

  5. tray

  6. toy bar

  7. nut

  8. top sectionTOYZ-Bounce-Baby-Step-Walker-FIG9 TOYZ-Bounce-Baby-Step-Walker-FIG10 TOYZ-Bounce-Baby-Step-Walker-FIG9 TOYZ-Bounce-Baby-Step-Walker-FIG10 TOYZ-Bounce-Baby-Step-Walker-FIG11 TOYZ-Bounce-Baby-Step-Walker-FIG13

  9. tray

  10. toy barTOYZ-Bounce-Baby-Step-Walker-FIG15

  11. nut TOYZ-Bounce-Baby-Step-Walker-FIG17 TOYZ-Bounce-Baby-Step-Walker-FIG18 TOYZ-Bounce-Baby-Step-Walker-FIG19

GENERAL INFORMATION

Dear Client,
Thank you for choosing this TOYZ by Caretero product. We inform you that the basic version of this walker is intended for indoor use only. The walker is not designed to be used on uneven terrain. It is very important to assemble and adjust all of the walker’s elements properly (wheels, stoppers, seat). A properly assembled and regularly maintained walker will serve your child longer and better.

REMOVING AND REPLACING THE BATTERIES

The walker’s toys are powered with 2 type AA 1,5 V batteries (not included).
WARNING: The batteries must always be replaced by and adult person.
WARNING: To insert/replace the batteries:

  1. unfasten the screw holding the battery lid;
  2. remove the lid;
  3. remove the worn-out batteries;
  4. insert new batteries, checking that the polarization matches the diagrams inside the battery compartment;
  5. put the lid back on and fasten it with the screw,

WARNING: Never leave batteries or tools within the baby’s reach.
WARNING: Never leave this product exposed to rainwater and humidity may damage the electrical Circuits.
WARNING: Always remove worn-out batteries from this product, to eliminate possible leaks that may damage the product.
WARNING: Remove the batteries if this product is not used for a longer period of time.
WARNING: Alkaline batteries are recommended for use with this product.
WARNING: Never use different battery types at the same time, nor use old and new batteries at the same time.
WARNING: Never throw used batteries into fire or dispose of them in any other way, than putting them into special battery waste bins.
WARNING: Never short-circuit the electrical parts of this product.
WARNING: Never charge batteries that are non-rechargeable. They may explode during that process.
WARNING: It is not recommended to use rechargable batteries. They may cause worse functioning of this product.
WARNING: In case of a leak from the batteries, please remove the batteries at once, clean the battery compartment and wash your hands thoroughly.
WARNING: In case rechargeable batteries are used, always remove them from this product before charging. The charging process must be overseen by an adult person.

MAINTENANCE AND CLEANING

It is required to regularly check and adjust all the walker’s elements, especially the wheels, stoppers, seat and height adjustment mechanism. Before each use of the walker, please check if all the elements are properly assembled. In case any part of the walker gets worn out, please replace it with a new one. The walker may be cleaned with a damp cloth. Never use strong ammonia-based detergents, oils, solvents or any other strong chemical substances. Frequent use of adjustment mechanisms (height adjustment lever) causes slow degrading of these elements. If any element loses its initial properties, replace it with a new one. If the seat pad fabric gets torn or cut, stop using the walker immediately and replace the seat pad with a new one. If any part of this walker needs replacing, always use the original parts provided by the distributor.

WALKER ASSEMBLY INSTRUCTIONS

Remove all elements of the walker from the package and check that they match the quantities given in the ‘parts list in the package’ section. If any part is missing, contact your TOYZ dealer or distributor.

  1. Unfolding the walker. Tilt the rear legs of the frame backward. Attach the frame of the walker to the frame. Tilt the front leg of the walker. Snap the front leg in the hook at the front of the base.

  2. Assembly of the seat. Attach the backrest to the seat ring by inserting the latches on the backrest into
    the holes on the ring. Fix the upholstery on the seat by hooking the hooks on the upholstery with the tabs on the seat. Attach the seat to the opening in the body of the walker. The straps under the seat are used to adjust the height of the seat.

  3. Installing the batteries in the tray. Open the cover at the bottom of the tray, insert the batteries as indicated and close the cover, 2 AA size batteries (not included) are required.

  4. Installation of the tray. Push the toy bar into the side holes in the tray. The sound function is turned on and off using the lever on the side of the tray. Place the tray in the front part of the frame of the walker and fasten it with the nuts.

  5. Jumper function. The Bounce walker has a special overlay, which acts as a mini trampoline. Attach the overlay to the base of the walker. The button on the overlay serves to release the latch.

  6. Pusher function. Remove the seat. Iilt the bow at the rear of the walker. The child can use the handle to hold the pusher

  7. Wheel lock. Pull the lever next to the wheels to block their rotation.

  8. Folding the walker. Press the button on the front of the base and fold the front leg. Tilt the rear legs of the walker down until it is completely folded.

SAFETY

Read the instructions carefully before use and keep sate for later reference! There is a risk of injury to the child if the instructions are not observed! The maximal permissible load for this product is 12 kg. This walker is not intended to be used outside of buildings. Never use this walker if the ground is wet or slippery or loose. This walker may not be used by more than one child at a time!

WARRANTY LIMITATIONS

The warranty does not cover destruction or losing any parts of this walker due to talls, abrasions, improper assembly, usage without accordance to this manual, careles riding, lack of maintenance, using non-original or additional parts.

WARNINGS

  • Read the instructions carefully before use and keep them safe for later reference There is a risk of injury to the child if the instructions are not observed!
  • Never leave the child unattended;
  • The child will be able to reach further and move rapidly when in the baby walker:
    • prevent access to stairs, steps, and uneven surfaces.
    • guard al fires, heating, and cooking appliances;
    • remove hot liquids, electrical flexes, and other potential hazards from reach;
    • prevent collisions with glass in doors, windows, and furniture;
    • do not use the baby walking frame if any components are broken or missing:
    • this baby walking frame should be used only for short periods of time (e. g. 20 min.);
    • do not use replacement parts other than those approved by the manufacturer or distributor;
    • this baby walking frame is intended to be used by children who can sit unaided, approximately from 6 months. It is not intended for children weighing more than 12 kg;
  • Never allow the baby to put small elements in its mouth;
  • Always instruct the baby on how to use this product properly;
  • Never use this product on open roads;
  • For the safety of your baby, remove all plastic bags from the playing area;
  • Never use this product in the vicinity of water containers (swimming pools, rivers etc.) or any other obstacles
  • Never use this product in dark areas;
  • Keep the product packaging away from the child to avoid suffocation;
  • Before each use chech whether all elements are attached properly;
  • This walker is designed for use by one baby at a time only;
  • The assembly of this product may be conducted only by an adult.

Learn more about the brand boyz by Caretero.
DISTRIBUTOR:
IKS 2- Children’s Goods Distribution Centre 9 Rybnicka Street, 43-190 Mikolow, Poland +48 32 226 06 06
e-mail: [email protected], www.toyz.pl

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals