TOYZ Hula Activity Center User Manual
- June 9, 2024
- TOYZ
Table of Contents
TOYZ Hula Activity Center User Manual
Product complies with: EN71
IMPORTANT! Please read these instructions carefully before the first use
of the product.
This manual should be kept for future use.
Thank you for choosing the Toyz by Caretero HULA activity center.
You bought a modern, high quality product.
We are sure it will help your child in safe, harmonious growth.
We encourage you to learn about our full offer on our website: www.toyz.pl
Should you have any remarks about this product, feel free to share them with
us.
Toyz by Caretero TEAM.
LIST OF PARTS IN THE BOX
WARNING: Before assembling the toy, please check if all listed parts are present in the box.
GENERAL INFORMATION
Dear Client,
Thank you for chosing this TOYZ by Caretero product.
We inform you that the basic version of this jumper is intended for indoor use
only. The jumper is not designed to be used on uneven terrain. It is very
important to assemble and adjust all of the jumper’s elements properly
(stoppers, seat).
A properly assembled and regularly maintained jumper will serve your child longer and better.
MAINTENANCE AND CLEANING
It is required to regularly check and adjust all the jumper’s elements, especially the seat and the height adjustment mechanism.
Before each use of the jumper, please check if all the elements are properly
assembled.
In case any part of the jumper gets worn out, please replace it with a new
one.
The jumper may be cleaned with a damp cloth. Never use strong ammonia-based
detergents, oils, solvents or any other strong chemical substances.
Frequent use of adjusment mechanisms (height adjustment lever) causes slow degrading of these elements.
If any element loses its initial properties, replace it with a new one.
If the seat pad fabric gets torn or cut, stop using the jumper immediately and
replace the seat pad with a new one.
If any part of this jumper needs replacing, always use original parts provided by the distributor.
JUMPER ASSEMBLY INSTRUCTIONS
- Install the legs in the table by placing them in the appropriate holes on the bottom.
- Install the table with the legs on the base.
- Place the seat on the table.
- Install the education panel on the front table.
- Put all toys in the right places on the table.
- The toy should resemble the picture.
- The legs are height adjustable in 3 steps. The seat is fully rotatable.
SAFETY
Read the instructions carefully before use and keep safe for later reference!
There is a risk of injury to the child if the instructions are not observed!
Maximal permissible load for this product is 12 kg.
This jumper is not intended to be used outside of buildings. Never use this jumper if the ground is wet or slippery or loose.
This jumper may not be used by more than one child at a time!
WARRANTY LIMITATIONS
The warranty does not cover destruction or losing any parts of this jumper due to falls, abrasions, improper assembly, usage without accordance to this manual, lack of maintenance, using non-original or additional parts.
WARNINGS
-
Read the instructions carefully before use and keep safe for later reference! There is a
risk of injury to the child if the instructions are not observed! -
Never leave the child unattended;
-
This toy is intended to be used by children who can sit unaided, approximately from 6 months. It is not intended for children weighing more than 12 kg;
-
This product should be u sed only for short periods of time (e.g.20mins.)
-
Never allow the baby to put small elements in its mouth;
-
Always instruct the baby on how to use this product properly;
-
For the safety of your baby, remove all plastic bags from the playing area;
-
Never use this product in the vicinity of water containers (swimming pools, rivers etc.) or any other obstacles;
-
Keep the product packaging away from the child to avoid suffocation;
-
Before each use chech whether all elements are attached properly;
-
This jumper is designed for use by one baby at a time only;
-
The assembly of this product may be conducted only by an adult.
DYSTRYBUTOR:
IKS 2 Mucha Sp. J.
ul. Rybnicka 9, 43-190 Mikołów, Polska
+48 32 226 06 06
e-mail: [email protected], www.toyz.pl
DISTRIBUTOR:
IKS 2 – Children’s Goods Distribution Centre
9 Rybnicka Street, 43-190 Mikolow, Poland
+48 32 226 06 06
e-mail: [email protected], www.toyz.pl
www.facebook.com/ToyzBrand www.youtube.com/ToyzChannel
Read More About This Manual & Download PDF: