SEENMING HOUSE 3451CD1 Indoor Mini Hanging Kitchen Island Pendant Light Fixtures Instruction Manual
- May 15, 2024
- SEENMING HOUSE
Table of Contents
SEENMING HOUSE 3451CD1 Indoor Mini Hanging Kitchen Island Pendant Light
Fixtures
Product Specifications
- SKU: #3451/3454/3493/3495CD1 (Bulb not included)
- Materials: Plastic Clip, Metal Cap, Glass Bottle, Lip
Product Usage Instructions
Bulb Installation
Secure the bulb (not included) into the socket (O).
Assembly
- Place the glass bottle (M) onto the socket (O).
- Put the metal cap (L) onto the glass bottle (M).
- Secure the threaded collar (I) into the lip (N).
- Secure the hex nut (H) into the threaded collar (I) using the Allen wrench (G).
Important Note
Make sure to follow the assembly instructions carefully to ensure proper installation and usage of the product.
Frequently Asked Questions (FAQ):
Q: What should I do if the bulb is not fitting securely into the socket?
- A: Make sure you are using the correct type of bulb recommended for this product. If the issue persists, contact our customer service for assistance.
Q: Can I use this product with a dimmable bulb?
- A: Yes, you can use a dimmable bulb with this product as long as it meets the recommended wattage specifications.
Dear customer,
- Thank you for choosing Our Lighting. If you have any concerns or questions about our products, please do not hesitate to contact us directly.
- We’ll provide the best service for you. Hope you enjoy the shopping experience!
- Any questions please free to contact us: Email: nikki@doraimilight.com
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician.
- To reduce the risk of fire, electrical shocks, or personal injuries, always turn off the light fixture and let it cool before replacing the light bulbs.
- Do not touch the bulb when the fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE A CFL 10W, LED 6W bulb types and wattages. Do not exceed the recommended wattage
- SKU:# 3451/3454/3493/3495CD1
- (Not including the bulb)
Parts included
Hardware enclosed
- Step 1: Unscrew the Canopy Nuts(F) from the Mounting Plate(D).
- Step 2:
- Secure Bulb(not included) into Socket(O).
- Place Glass Bottle(M) onto Socket(O) and place Metal Cap(L) onto Glass Bottle(M). Secure Threaded Collar(1) into Lip(N) and secure Hexnut(H) into Threaded Collar(1) with Allen Wrench(G).
- Step 3:
- Cross the Power Cord(J) into the Threaded Collar(I) and Canopy(E), then adjust the right length of the power cord.
- Use Allen Wrench(G) to secure Hexnut(H).cross Power Cord(J) into Plastic clip(K) for pulling resistant
- Step4:
- Gently pull the existing wire down from the ceiling junction box and allow the wires to hang.
- Attach Mounting Plate (D) to the ceiling outlet box.
- Secure the Mounting Plate (D) by tightening 2 mounting secrew (C) with a screwdriver.
- Step5:
- Connect the white wire from the fixture to the white wire of the supply circuit. Connect the black wire from the fixture to the black wire of the supply circuit.
- Step 6:
- Place the canopy (A) against the mounting surface, and secure the Canopy Nut(F).
Email:nikki@doraimilight.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>