SEENMING HOUSE 3459D1 2 Pack 1 Light Hanging Indoor Kitchen Island Pendant Lights Instruction Manual
- May 15, 2024
- SEENMING HOUSE
Table of Contents
SEENMING HOUSE 3459D1 2 Pack 1 Light Hanging Indoor Kitchen Island
Pendant Lights
Product Information
Specifications:
- SKU: #3459/3460/3461/3462D1 (Bulb not included)
- Material: Plastic
- Components: Glass Shade(M), Socket(L), Socket Ring(N)
Product Usage Instructions
Assembly Instructions:
WARNING: Ensure to follow recommended weights and guidelines. Do not exceed the specified weight limits.
- Place the Glass Shade(M) on the Socket(L).
- Secure the Glass Shade(M) in place by fastening it with the Socket Ring(N).
FAQs
- Q: What should I do if the Glass Shade does not fit securely on the Socket?
- A: If the Glass Shade does not fit securely, please double-check that it is aligned properly and the Socket Ring is tightened adequately.
- Q: Can I use a bulb with a different SKU number than the one specified?
- A: It is recommended to use a bulb with a compatible SKU number to ensure proper fit and functionality.
- Q: How do I clean the Plastic Clip?
- A: To clean the Plastic Clip, use a damp cloth with mild soap and water. Avoid using harsh chemicals or abrasive materials.
WARNING
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when the fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE A CFL 10W, LED 6W bu lb types and wattages. Do not exceed the recommended wattage
SKU: # 3459/3460/3461/3462D1
(Not including the bulb)
Parts included
Hardware enclosed
Product Parts
Installation Instruction
-
Step 1:
Unscrew the Canopy Nuts(F) from the Mounting Plate(D). -
Step 2:
Cross the Power Cord(J) into the Threaded Collar(I) and Canopy(E), then adjust the right length of the power cord. Use Allen Wrench(G) to secure Hexnut(H),cross Power Cord(J) into Plastic clip(K) for pulling resistant -
Step3:
1. Gently pull the existing wire down from the ceiling junction box and allow the wires to hang.
2. Attach Mounting Plate (D) to the ceiling outlet box.
3. Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver-
Step4:
Connect the white wire from the fixture to the white wire of the supply circuit. Connect the black wire from the fixture to the black wire of the supply circuit. -
step 5:
Place the canopy (A) against the mounting surface, and secure the Canopy Nut(F). -
Step6:
1. Place Glass Shade(M) on Socket(L) and secure with Socket Ring(N).
2. lnstall bulbs{not included) into the Socket(L).Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>