SEENMING HOUSE 3395XD3 Crystal Shade Kitchen Island Hanging Modern Concise Ceiling Pendant Lighting Instruction Manual

SEENMING HOUSE 3395XD3 Crystal Shade Kitchen Island Hanging Modern

Concise Ceiling Pendant Lighting

Dear customer,
Thank you for choosing Our Lightning. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We’ll provide the best service for you. Hope you enjoy the shopping experience!

Any questions please free to contact us:
Email:[email protected]

Assembly Instructions

WARNING:

• It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
• To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
• Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
• Keep flammable materials away from a lit bulb.
• Shut off all the main electrical supply from the fuse box/circuit breaker
• Use E26 TYPE A CFL 10W, LED 6W bulb types and wtttages. Do not exceed recommended wattages.

SKU:# 3395/3399/3400XD3 /3661D3
(Not included the bulb)

Parts Included:

Step 1:

1. Unsecure Hexnut(H) from Threaded Collar(I) with Allen Wrench(G).
2. Cross Power Cord(J) into the Threaded Collar(I), then adjust the length as needed. Use Allen Wrench(G) to secure Hexnut(H) and cross Power Cord(J) into Plas?c clip(N) for pulling resistant

Step 2:

1. Open the Janitors from Wiring Terminal(O).
2. Insert the white/black wire into the hole of Wiring Terminal(O), then close the Janitors.

Step 3:

1. Gently pull the wire in the ceiling junction box and let the wire hang.
2. Attach Mounting Plate (D) to the junction box.
3. Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver.

Step 4:
Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire with the Wire Connector (A).

Step 5:
Place the canopy (E) against the mounting surface and fasten the Canopy Nuts(F) to the Mounting Plate (D)

Step 6:

1. Unsecure Socket Ring(N) from Socket(M), place Shade(N) on Socket(M) and secure with Socket Ring(N).
2. Install bulbs (not included) into the Socket(K).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>