SEENMING HOUSE 3660D1 Crystal Shade Hanging Kitchen Island Pendant Light Instruction Manual
- June 17, 2024
- SEENMING HOUSE
Table of Contents
3660D1 Crystal Shade Hanging Kitchen Island Pendant Light
Instruction Manual
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE A CFL 10W, LED 6W bu lb types and wattages. Do not exceed recommended wattages
SKU:# 3395/3399/3400/3660D1
(Not included the bulb)
Parts included:
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 2 |
| H | Hexnut | 1 |
| I | Threaded Collar | 1 |
| J | Power Cord | 1 |
| K | Plastic Cilp | 1 |
| L | Socket | 1 |
| M | Shade | 1 |
| N | Socket Ring | 1 |
Hardware enclosed:
| Part | Description | QTY |
|---|---|---|
| A | Wire Connector | 3 |
| c | Mounting Screw | 2 |
| G | Allen Wrench | 1 |
Dear customer,
Thank you for choosing Our Light ng. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us: Email:
nikki@doraimilight.com
Step 1:
Unscrew the Canopy Nuts(F) from the Mounting Plate(D). Step 2:
Cross Power Cord(J) nto the Threaded Collar(I) and Canopy(E), then adjust the
right length of power cord.
Use Allen Wrench(G) to secure Hexnut(H),cross Power Cord(J) into Plastic
clip(K) for pulling resistant Step3:
- Gently pull existing wire down from the ceiling junction box and allow wires to hang.
- Attach Mounting Plate (D) to the ceiling outlet box.
- Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver.
Step4:
Connect the white wire from the fixture to the white wire of the supply
circuit. Connect the black ire from the fixture to the black wire of the
supply circuit. Steps:
Place the canopy (A) against the mounting surface, secure the Canopy Nut(F).
Step 6:
- Unsecure Socket Ring(N) from Socket(L), place Shade(M) on Socket(L) and secure with Socket Ring(N).
- lnstall bulbs(not ncluded) nto the Socket(L).