SEENMING HOUSE 12 Light Chandelier Instruction Manual

SEENMING HOUSE 12 Light Chandelier

Product Specifications

• SKU: #3527D12 (Bulb not included)
• Materials: Metal
• Dimensions: Various sizes as per assembly instructions
• Weight: Not specified

Assembly Instructions

WARNING

• It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
• To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
• Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
• Keep flammable materials away from a lit bulb.
• Shut off all the main electrical supply from the fuse box/circuit breaker
• Use E12 TYPE B CFL 6W, LED 4W bul b types and wattages. Do not exceed recommended wattages SKU:# 3527D12 (Not including the bulb)

Dear customer,
Thank you for choosing Our Lighng. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We’ll provide the best service for you. Hope you enjoy the shopping experience!

SKU: # 3527D12
(Not including the bulb)

PARTS INCLUDED

Step 1:
Unscrew the Canopy Nuts(F) from the Mounting Plate(D)

Step 2:

1. Place Metal Cup(S) on Metal Connector(R) and secure Metal  Sleeve(T) into Metal Connector(R).
2. Attach Large Elbow Pipe(X) on Large Fixture(Z) and secure Hexnuts(O), Spring Washer(P) into the lip of Large Elbow Pipe(X), then secure Hexnuts) with Allen Wrench(Y).
3. Attach Small Elbow Pipe(Q) on Small Fixture(N) and secure Hexnuts(O) and spring Washer(P) into the lip of Large Small Elbow Pipe(Q), then secure Hexnuts(O) with Allen Wrench(Y).
4. Secure Large Metal Plate(W) into Large Elbow Pipe(X) with Screw(U).
5. Secure Small Metal Plate(V) into Small Elbow Pipe(Q) with Screw(li)I

Step 3:

1. Open the Janitors from the Wiring Terminal, E+).
2. Insert the white/black wire into the hole of the Wiring Terminal, E+), then close the Janitors.
3. Place a Small Metal Cap(L) on the Lip(M) and secure it with a Threaded Collar(K).
4. Place a Large Metal Cap(B+) on Threaded Pipe(A+) and secure it with Finial(C+).

Step 4:

1. Secure Middle Metal Tube(J), Large Metal Tube(I), Small Metal Tube(H) into Threaded Collar(K) in order.
2. Secure Joint(G), Canopy(E) into Small Metal Tube(H).

Step5:

1. Gently pull the wire in the ceiling junction box and let the wire hang.
2. Attach Mounting Plate (D) to the junction box.
3. Secure the Mounting Plate (D) by tightening 2
   Mounting Screw (C) with a screwdriver.

Step6:
Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire, with the Wire Connector(A) .

Step7:

1. Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy nuts(F).

Step 8: Install bulbs(not included) into the Socket.

FAQs

• Q: What should I do if I exceed the recommended wattage?
  

  • A: It is important not to exceed the recommended wattage to avoid damage to the product or potential hazards. Please refer to the product specifications for the recommended wattage and use appropriate bulbs.

• Q: How do I contact customer support for further assistance?
  

  • A: If you have any concerns or questions about the product, please feel free to contact us directly via email at nikki@doraimilight.com. We are committed to providing the best service for our customers.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>