SEENMING HOUSE 3526D9 6.8.10.12 Light Chandelier Gold 9 Light Instruction Manual

Assembly Instructions

WARNING:

• It is strongly suggested that all hardwired fixtures be installed by a professional electrician.
• To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
• Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
• Keep flammable materials away from a lit bulb.
• Shut off all the main electrical supply from the fuse box/circuit breaker
• Use E12 TYPE B CFL 6W, LED 4W bulb types and waages. Do not exceed recommended waages

SKU:# 3526D9

(Not included the bulb)

Parts included:

Hardware enclosed:

1. Wire connection warning: Black wire connect to positive White wire connect to negative Brass copper connect to grounding wire

Step 1:
Unscrew the Canopy Nuts(F) from the Mounting Plate(D).

Step 2:

1. Place Metal Cup(S) on Metal Connector(R) and secure Metal Sleeve(T) into Metal Connector(R).
2. Attach Large Elbow Pipe(X) on Large Fixture(Z) and secure Hexnuts(O), Spring Washer(P) into the lip of Large Elbow Pipe(X), then secure Hexnuts(O) with Allen Wrench(Y).
3. Attach Small Elbow Pipe(Q) on Small Fixture(N) and secure Hexnuts(O), Spring Washer(P) into the lip of Large Small Elbow Pipe(Q), then secure Hexnuts(O) with Allen Wrench(Y).
4. Secure Large Metal Plate(W) into Large Elbow Pipe(X) with Screw(U).
5. Secure Small Metal Plate(V) into Small Elbow Pipe(Q) with Screw(U).

Step 3:

1. Open the Janitors from Wiring Terminal(D+,E+).
2. Insert the white/black wire into the hole of Wiring Terminal(D+,E+), then close the Janitors.
3. Place Small Metal Cap(L) on Lip(M) and secure with Threaded Collar(K).
4. Place Large Metal Cap(B+) on Threaded Pipe(A+) and secure with Finial(C+).

1. Janitor

Step 4:

1. Secure Middle Metal Tube(J), Large Metal Tube(I), Small Metal Tube(H) into Threaded Collar(K) in order.
2. Secure Joint(G), Canopy(E) into Small Metal Tube(H).

Step5:

1. Gently pull the wire in the ceiling junction box and let the wire hang.
2. Attach Mounting Plate (D) to the junction box.
3. Secure the Mounting Plate (D) by tightening 2 Mounting Screw (C) with a screwdriver.

Step6:

Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire, with the Wire Connector(A) .

Step7:

1. Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy nuts(F).

Step 8:

Install bulbs(not included) into the Socket.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>