ZEEGMA Grand Vitamin Multifunction Blender User Manual

June 9, 2024
ZEEGMA

ZEEGMA Grand Vitamin Multifunction Blender

ZEEGMA Grand Vitamin Multifunction Blender

Introduction

Dear customer!
Thank you for placing trust in us and choosing Zeegma. We provide you with a product perfect for everyday use thanks to the use of high-quality materials and modern solutions. We are convinced that the product will satisfy your requirements as it has been manufactured with utmost care. Before you use the product, please read this operating manual carefully. Should you have any remarks or questions concerning the product, please do not hesitate to contact us: [email protected]

Important

  1. Before you start using the device, please read the operating manual and follow the tips included. The manufacturer shall not be held responsible for damage arising from use of the product at variance with intended use or for damage resulting from wrong use of the device. The operating manual must be kept for future reference.
  2. Do not leave the operating device unattended.
  3. To avoid electric shock risk, do not immerse the power cable, plug or body of the device in water or other liquids. Do not use the device near source of water, do not touch it with wet hands or do not stand on a wet surface while using. If the device contacts water, unplug the power cable. The motor of the device cannot contact water.
  4. Check the device for damage on a regular basis. Do not use the device if it is damaged. Do not try to repair the device on your own – contact the authorized service center. If the power cable gets damaged, you should have it replaced by the manufacturer in order to avoid hazards.
  5. Make sure the electric voltage specified on the device label complies with the electric voltage at your place.
  6. Make sure the power cable does not contact hot components. Do not pull it through sharp edges.
  7. The device is intended for home use only. The device is not suitable for use in the open air. Do not use it for other purposes at variance with intended use.
  8.  The device is not intended for commercial use.
  9.  After use, when you assemble or disassemble or change accessories or clean, the device must be deactivated and unplugged.
  10.  The device can be used by persons with limited physical, sensory or mental capabilities as well as persons who lack suitable knowledge and experience in using the device as long as their actions are supervised or if they have been previously instructed on safe use of the device and related risks.
  11. Please remain highly careful when using the device if children are around. Do not let children play with the device. Keep the device and power cable out of reach of children.
  12.  Please remain highly careful when handling blades, emptying a bowl and cleaning the product.
  13. Before use, make sure the blending tip has been properly attached to the jar.
  14. Use the device only with original accessories and as designed, remember to take all safety measures. Use original spare parts only.
  15. Avoid contact with moving parts of the device. Do not place anything inside the device when it is operating in order to avoid bodily injuries and damage to the device.
  16.  Remain careful when pouring a hot liquid into the jar since the liquid may overflow due to sudden impact of steam.
  17. Do not modify the device in any way.

The product complies with requirements of EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to selective collection. The product must not be disposed of along with domestic waste as it may pose a threat to the environment and human health. The worn-out product must be handed over to the electrics and electronics recycling center.

List of parts

ZEEGMA Grand Vitamin Multifunction Blender 1

  1. Measure
  2. Lid
  3. Glass jar with level indication
  4. Blending tip
  5. Jar base
  6. Control panel
  7. Blender
  8. Silicone seal

Control panel

ZEEGMA Grand Vitamin Multifunction Blender 2

  1. On/off switch

  2. Speed adjustment
    Quick selection keys:

    • 3a. Pulsation mode
    • 3b. Ice crushing mode
    • 3c. Automatic cleaning mode

How to assemble

  1. Before first use, please wash the device and its particular parts carefully.
  2. Place the silicone seal (8, fig. 1) on the blender tip. Misplacement of the seal under the tip may cause damage to the device.
  3. Place the glass jar with a blending tip and jar base on the blender, and then rotate it in a clockwise direction. When the device has been rotated properly, it is ready for operation.

How to use

  1. To switch the device on, turn the knob into ON (fig. 2).
  2. To change speed, turn the knob into selected position between MIN and MAX (fig. 2).
  3. To use quick selection keys, set the knob in ON (fig. 2). The indicator on keys will go on.

Pulsation mode

Press and hold to get the desired effect.

Ice crushing mode

  1. Press the key (3b, fig. 2) to start crushing the ice.
  2. To finish the procedure, press the key again or wait until the device stops working automatically after 60 seconds.

Warning: You can put max. 8 ice cubes (20x20x20 mm at the largest) into the jar at a time.

Automatic cleaning mode

  1. To use the automatic cleaning mode, pour 750ml of water into the device, add a small amount of dishwashing liquid, put the cover on, and then press the key (3c, fig. 2).
  2. After 60 seconds the device will turn off automatically. Rinse the device under running water and let it dry off.

How to use a glass jar

  1. Put ingredients into the jar.
  2. Carefully lock the jar with a lid (fig. 3).
  3. Place the measure in the lid hole (fig. 4).
  4. Select speed by setting the knob in a desired position (fig. 2).

Note: Do not let the device operate continuously for more than 1 minute. Let the device cool down and reach room temperature before another use.
Note: It is advisable to cut food into smaller pieces before you put them into the jar. Do not mix large amounts of food at a time.

After use

  1. Switch the device off and unplug the power cable.
  2. Remove the lid and measure from the jar.
  3. Remove the jar and its base from the blender.
  4. Disconnect the jar base from the blending tip.

How to clean

Note: Wash particular parts of the device shortly after use.
Note: Be very careful when you are cleaning parts. Do not touch sharp parts!

  1. Before cleaning, switch the device off and unplug the power cable.
  2.  Remove all detachable parts.
  3. Wash detachable parts in warm water with a dishwashing liquid.
  4. You can wash the jar in the dishwasher.
  5. Clean the main body of the blender with a dry cloth.

The pictures are for reference only. The real design of the products may differ from the pictures presented.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ZEEGMA User Manuals

Related Manuals