PURE RESONANCE AUDIO PRIVACYCARD User Guide
- June 7, 2024
- PURE RESONANCE AUDIO
Table of Contents
PRIVACYCARDTM USB SOUND MASKING GENERATOR
PRIVACYCARDTM QUICK START GUIDE
Caution : Please read this manual carefully before operating. Damage
caused by misuse is not covered by the warranty.
INSTALLATION & OPERATION
STEP 1 : Open the case and remove the card.
STEP 2 : Gently press down on the top opening tab on the red side.
STEP 3 : The USB connection should fold up. Flip open the tab with the
red side down.
STEP 4 : Insert into the USB slot on the media player on the left side of
the MA/RMA series mixer amplifier.
STEP 5 : After a moment, the Pure Resonance Audio mixer amp should detect
a signal from the USB and switch to the USB input on the media player. You
should see the play clock running.
STEP 6 : To adjust the volume on the media player, press and hold the vol
- or vol – button. It may be helpful to adjust the volume on the media player
when blending masking with music.
STEP 7 : If desired, use the remote control to adjust the equalizer settings of the media player. STEP 8: Select the desired EQ setting of the media player and adjust the master volume and master EQ settings as desired for your chosen blend of masking/music.
STEP 9 : After 10 hours, the masking will reach the end of the drive. It will then automatically repeat to keep masking operating as continuously as possible.
Specifications may change without notice.
PURE RESONANCE AUDIO®
866-676-7804
sales@pureresonanceaudio.com
www.PureResonanceAudio.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>