TooQ TQGCC101-B Ragnarok Gaming Semi Tower Case Instruction Manual
- June 13, 2024
- TooQ
Table of Contents
TooQ TQGCC101-B Ragnarok Gaming Semi Tower Case
Installation
-
To remove the tempered glass, unscrew the 4 corner screws. Before removing the last screw, please be careful and hold onto the glass to prevent it from falling. To remove the rear side panel, simply unscrew the 2 rear screws.
-
You can install up to 2 x 3.5″ hard disks in the available slots. By aligning the holes of the hard disk and securing them with the 4 screws. If needed, for easier installation, you can remove the disk bracket by unscrewing the 2 screws at the bottom.
-
You can install up to 3 x 2.5″ hard drives in the available slots. By aligning the holes of the hard drive and securing them with the 4 screws. In the front slots, insert the holes of the disk into the guides and align the 2 holes.
-
Ventilation system
Front: 3 x 120 mm (includes 3 x 120 mm RGBF 4 pin MOLEX connection).
Rear: 1 x 120mm (includes 1 x 120mm RGBF 4 pin MOLEX connection).
Upper: 2 x 120mm (not included).
Supports radiator installation up to 280mm in the front.
Supports GPU with a maximum length of 350mm.
Supports CPU cooler up to 160mm in height.
-
Front USB I/O connectors
1 x USB3.0 / 2 x USB2.0 / HD Audio
All specifications are subject to change without notice. Please check with
your supplier for exact offers. Products may not be available in all markets.
Product color and bundled software versions are subject to change without
notice.
Brand and product names mentioned are trademarks of their respective
companies.
CUSTOMERS SUPPORT
Manuals available at: www.tooq.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>