2023 Version Football Flick Urban Skills Trainer Instruction Manual

2023 Version Football Flick Urban Skills Trainer

Product Information

Specifications:

• Product Name: Football Flick Urban Skills Trainer
• Version: 2023
• Manufacturer: iControl Sport Limited
• Assembly Location: India
• Designed for use with standard-weight footballs of any size

Product Usage Instructions

Assembly Instructions:

1. Open the red X Frame (J) and ensure rubber feet are flat on the ground.
2. Attach Ball Net (C).
3. Take Front Ramp (A) and insert Long Slider Rods (D) and Short Slider Rods (E).
4. Feed Large Slider Rods (D) through X Frame (J) and tighten Hand Screws (G).
5. Attach Rear Frame (B) using Short Hand Bolts (H) and Long Hand Bolts (I).
6. Attach the Rear Mesh (L) using Bunjee cords (K) to create tension.

Safety and Care:

• Store the unit in the provided bag in a dry place when not in use.
• Avoid prolonged exposure to elements like sunshine, rain, or snow.
• Use only with standard weight footballs and do not apply pressure with other objects.
• Assemble the unit with adult supervision and regularly check fastenings.
• Supervise children when using the Skills Trainer.

Collapsing:
To collapse, reverse the assembly steps 1-5, store in the carry bag provided, and place loose parts in the bag’s inside pocket.

Adjusting:
The Front Ramp (A) and Spacers (F) can be arranged in different positions for various return angles. Adjust Rear Mesh tension for unpredictable returns.

FAQ

• Q: Can I use the Football Flick Urban Skills Trainer with heavier balls?
  A: The unit is designed for use with standard-weight footballs of any size. It is not recommended to use heavier adaptations as it may cause damage to the unit.

• Q: How long does the initial assembly take?
  A: Initial assembly should take around 10 minutes.

IMPORTANT:
REVIEW CAREFULLY AND KEEP FOR FUTURE REFERENCE

Developed in the UK by iControl Sport Limited/Football Flick Assembled in India.

SAFETY AND CARE

• When not in use, always store the unit in the bag provided in a dry place.
• Prolonged exposure to sunshine, rain, snow etc., will cause deterioration of the unit.
• The Football Flick Urban Skills Trainer has been designed to be used with standard-weight footballs of any size. It has not been designed to be used with heavier adaptations or any other objects. Do not sit, stand or apply pressure to the unit with any other object other than a standard-weight football. Assembly should be carried out by an adult. After assembly, regularly check all fastenings are secure.
• The Football Flick Urban Skills Trainer should be used responsibly and under the supervision of adults where children may be using the unit.

INCLUDED PARTS

ASSEMBLY INSTRUCTIONS

• STEP 1 Open red X Frame (J). Ensure that the rubber feet are flat on the ground. If they are not, or if fixing holes do not align in step 5, close and re-open X Frame (J) in the opposite direction. Now attach the Ball Net (C).
• STEP 2 Take Front Ramp (A) and insert 2 Long Slider Rods (D) into the upper metal channel. Insert 2 Short Slider Rods (E) into the lower metal channel.
• STEP 3 Feed the Large Slider Rods (D) through the X Frame (J), this can be made easier by lifting the X Frame (J) to a slightly higher position. Place 4 Spacers (F) in position (See ADJUSTING Section for options). Loosely tighten Hand Screws (G) onto each rod. Now feed the Short Slider Rods (E) through the lower section of the X Frame (J). Tighten all 4 Hand Screws to secure Front Ramp.
• STEP 4 Attach the Rear Frame (B) using 2 x Short Hand Bolts (H) to the lower frame side fixing point of the X Frame (J). Once attached and with the rear frame flat on the ground, slide the fasteners under the base of the X Frame (J) and close the fasteners around the lower X Frame (J) tube, ensuring that this is not overstretched.
• STEP 5 Lift (pivot) the Rear Frame (B) and attach to the top fixings on the X Frame (J) using 2 x Long Hand Bolts (I).
• STEP 6 Attach the Rear Mesh (L) using Bunjee cords (K) to create tension. Attach in four opposite corners and then fill the remaining spaces on the Rear Mesh (L).

• A = Front Ramp
• B = Rear Ramp Frame
• C = Ball Net
• D = Long Slider Rods
• E = Short Slider Rods
• F = Spacers
• G = Hand Screws
• H = Short Hand Bolts
• I = Long Hand Bolts
• J = X Frame
• K = Bunjee Cord
• L = Rear Mesh

COLLAPSING

Simply reverse the procedure in steps 1-5 ignoring the removal of the Ball Net (C). Store the unit away in the carry bag provided and place the loose parts in the inside pocket of the bag.

ADJUSTING

The Front Ramp (A) and The Front Ramp Spacers (F) can be arranged in 3 different positions (see below) to create different angles of return and a further 2 positions to create unpredictable returns. Adjust the Rear Ramp Mesh tension by following step 5 of the set-up instructions.

©2022 Football Flick | All Rights Reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>