VALUE 17991181 Counterbalance Monitor Arm Instruction Manual

VALUE 17991181 Counterbalance Monitor Arm

Declaration of Conformity

Manufacturer: Pioneer Corporation, Tokyo, Japan. EU Representative & Importer: PIONEER EUROPE NV, Belgium. This product complies with the Radio Equipment Directive 2014/53/EU. Full text of the EU Declaration of Conformity is available at www.pioneer-car.eu/compliance.

Specifications

Before You Start

Thank you for purchasing this PIONEER product. It is important to read and observe WARNINGS and CAUTIONS in this guide. Keep the guide in a safe and accessible place for future reference. For proper disposal, follow local regulations for electronic products.

WARNING

This product is a Class 1 laser product classified under the safety standard, IEC 60825-1:2014.

CAUTION

If this unit fails to work properly, contact your dealer or nearest authorized PIONEER Service Station.

Basic Operation

DEH-S720DAB Includes an M.C. (multi-control) dial, SRC (source)/OFF button, display window, disc loading slot, USB port, AUX input jack, and other controls.

About the Main Menu

Adjust various settings via the main menu. Press the M.C. dial to display the main menu, select categories and options, and confirm your selection.

Frequently Used Operations

Turn on the power SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power.

Adjust the volume

• Turn the M.C. dial.

Setup Operation

After installation, when the ignition switch is turned to ON, the setup menu appears. Select LANGUAGE, CLOCK SET, FM STEP, DAB ANT PW, and SPEAKER MODE. Confirm selections to proceed to the next menu option.

Tuner Operation

To receive preset stations, select [RADIO] with SRC/OFF, choose the band with BAND/, and press a number button. To store stations manually, press and hold the desired number button while receiving the station.

Connections

Connections vary for network mode (NW) and standard mode (STD). For power connections, ensure proper connection to avoid battery drain. Speaker leads, power amp, and microphone connections are discussed, with warnings provided to ensure safe and proper setup.

Installation

Allow ample space for installation, and follow DIN mount installation instructions. To remove the unit, use the supplied extraction keys. The installation of the microphone should not obstruct driving or become wound around the steering column or shift lever.

Bluetooth Connection

Connect up to two Bluetooth telephones simultaneously. Activate voice recognition mode by holding down a button and speaking into the microphone.

Making a Connection with Pioneer Smart Sync

Pioneer Smart Sync intelligently brings maps, messages, and music together in the vehicle. Do not operate the application while driving. Follow the instructions to connect this unit to the mobile device via USB or Bluetooth.

Listening to Spotify

Update the firmware of the Spotify application to the latest version before use. Connect the unit with the mobile device and start playback.

FAQ

• Q: How do I update the firmware of my Pioneer unit?
  • A: Visit the Pioneer website or refer to the Operation Manual for instructions on firmware updates.
• Q: Can I connect my smartphone to the DEH-S720DAB?
  • A: Yes, you can connect via Bluetooth or USB for compatible smartphones.
• Q: What should I do if the unit is not functioning properly?
  • A: Contact your dealer or the nearest authorized PIONEER Service Station.

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

• Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed by professionals.
• Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

IMPORTANT

Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of purchase for a replacement.

MAINTENANCE

Check that the product is secure and safe to use at regular intervals (at least every three months).

Installation Instruction

WARNING:

1. Firmly hold the two halves of the spring arm together and have another person cut Off the cable tie from around the spring arm.
2. Slowly release the pressure on the spring arm and allow it to gradually stretch to its full extension.

To properly balance the arm with the monitor mounted, adjust the spring tension using the supplied Allen Key as follows:

First, position and firmly hold the arm horizontally as shown. Ask for assistance should you require it.

CAUTION: To avoid damage to the monitor or mount, always keep the arm in a horizontal position while making adjustments. Again, ask for assistance if required.

• If the arm drops, turn the adjustment screw clockwise until it stays in a horizontal position.
• If the arm rises, turn the adjustment screw counter-clockwise until it stays in a horizontal position.

CAUTION:

DO NOT over-tighten the screws.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>