ZIRCON 740 Electronic Wall Scanner Instructions

May 15, 2024
ZIRCON

ZIRCON-logo

ZIRCON 740 Electronic Wall Scanner

ZIRCON-740-Electronic-Wall-Scanner-fig-1

Product Specifications

  • Dimensions: 7.44 in. H x 3.54 in. W x 1.30 in. D (190 mm x 90 mm x 33 mm)
  • Weight: 7.39 oz (210 g) without battery
  • Battery Type: 9V alkaline (not included)
  • Position Accuracy:
    • Up to a depth of 3/4 in. (19 mm): Typically within 1/8 in. (3 mm)
    • Up to a depth of 11/2 in. (38 mm): Typically within 3/16 in. (5 mm)
    • In Metal Scan mode: Typically within 1/2 in. (13 mm) using the dual scan and mark procedure
  • Depth: Scan for Metal, Scan for Electrical, Erasable Marker
  • Humidity: 5-90% RH (non-condensing)
  • Water Resistance: Splash and water resistant, not waterproof

Product Usage Instructions

Powering On:
Insert a 9V alkaline battery into the device following the indicated polarity. Press the power button to turn on the center finding tool.

Selecting Mode:
Choose the appropriate mode based on your needs – Metal Scan, Electrical Scan, or Erasable Marker detection.

Center Finding:
Place the device against the surface you want to scan and slowly move it horizontally until you locate the center point.

Depth Detection:
For accurate depth detection, ensure the device is properly calibrated and follow the recommended scanning procedures based on the desired depth.

Maintenance:
After each use, clean the device with a dry cloth to maintain optimal performance.

Frequently Asked Questions (FAQ):

  • Can this device be used outdoors?
    No, this device is recommended for indoor use only due to variations in sensing accuracy caused by external factors.

  • What should I do if the device shows inaccurate readings?
    Ensure the device is properly calibrated and check for factors such as moisture, wall texture, or material content that may affect accuracy.

  • Is the device waterproof?
    The device is splash and water-resistant but not completely waterproof, so avoid prolonged exposure to water.

PRODUCT FEATURES

MultiScanner®

740 quickly and easily locates studs and joists behind walls, floors, and ceilings. It also locates metal as well as live AC electrical wiring. The ultrabright display screen, dual SpotLite® Pointing System, and audio tone all indicate the location of the target. The signal strength indicator helps to distinguish between shallow and deep targets.

  • StudScan mode locates the center, edges, and direction of wood or metal studs up to 3⁄4 in. (19 mm) deep
  • DeepScan® mode doubles the scanning depth to 11⁄2 in. (38 mm)
  • Metal Scan mode locates non-ferrous metal, such as copper pipe, up to 11⁄2 in. (38 mm) deep, and ferrous metal, such as rebar, up to 3 in. (76 mm) deep
  • AC Scan mode finds and traces live, unshielded electrical wire up to 2 in. (51 mm) deep
  • WireWarning® Detection indicates the presence of live, unshielded electrical wire up to 2 in. (51 mm) deep in stud and metal scan modes
  • ACT™ (Auto Correcting Technology) corrects common errors automatically, such as when scanning begins over a stud
  • Unique floating-head design keeps the scanning head flat on rough surfaces
  • Integrated, erasable marker allows for one-handed operation

ZIRCON-740-Electronic-Wall-Scanner-fig-2

SPECIFICATIONS

  • Dimensions 7.44 in. H x 3.54 in. W x 1.30 in. D (190 mm x 90 mm x 33 mm)
  • Weight 7.39 oz (210 g) without battery
  • Battery Type 9V alkaline (not included)
  • **Position Accuracy***
    • Up to a depth of 3⁄4 in. (19 mm): Typically within 1⁄8 in. (3 mm)
    • Up to a depth of 11⁄2 in. (38 mm): Typically within 3⁄16 in. (5 mm)
    • In Metal Scan mode: Typically within 1⁄2 in. (13 mm) using the dual scan and mark procedure
  • **Depth***
    • StudScan mode: Up to 3⁄4 in. (19 mm)
    • DeepScan® mode: Up to 11⁄2 in. (38 mm)
    • Metal Scan mode: Up to 11⁄2 in. (38 mm) for copper, up to 3 in. (76 mm) for rebar
  • *AC & WireWarning® Position Accuracy **Typically 90-250 V at 50-60 Hz within 6 in. (150 mm) of a hot unshielded wire in drywall
  • *AC & WireWarning® Depth **In typical drywall with Romex® wiring, wires can be detected up to 2 in. (50 mm) deep
  • Operating Temperature 20° to 105°F (-7° to 41°C)
  • Storage Temperature -20° to 150°F (-29° to 66°C)
  • Humidity 5-90% RH (non-condensing)
  • Water Resistance Splash and water resistant, not waterproof
    NOTE: Sensing depth and accuracy can vary due to moisture, content of materials, wall texture, paint, etc. Indoor use only

ABOUT COMPANY

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals