MATCH PP 62DSP Audiotec Fischer Instructions
- June 13, 2024
- MATCH
Table of Contents
MATCH PP 62DSP
Instructions
PP 62DSP Audited Fischer
The PP 62DSP provides everything an up-to-date Plug & Play amplifier needs:
easy installation and maximum flexibility.
Its installation effortlessly takes place via Plug & Play cable harness which
is included in delivery – no cable has to be cut or modified. At www
.audiotec-fischer.com the huge online sound
setup database provides the appropriate setup.
The MATCH Extension Card (MEC) slot makes it possible to expand the PP 62DSP’s
functionality by inserting an optional MEC module – for example a Bluetooth ®
Audio Streaming module, an optical digital input or a High Resolution Audio
USB soundcard. In addition the PP 62DSP offers the option of hooking up
additional amplifiers using the two channel pre-amp output.
Sound enthusiasts get their money´s worth as well – thanks to the professional
and user-friendly Audited Fischer DSP PC-Tool software it becomes amazingly
easy to create individual sound setups. Furthermore the PP 62DSP is optionally
configurable as a 6channel amplifier with a total of 8 DSP channels. Due to
the numerous adjustment options it leaves nothing to be desired.
Videos
Features
- Simple Plug & Play connection to original sound systems using vehicle-specific adapter cables
- MATCH Extension Card (MEC) slot for additional input modules like Bluetooth® Audio Streaming, High Resolution Audio Streaming via USB etc.
- Extremely powerful “fixed point” Audio DSP with 56 Bit resolution
- Large database of car-specific setups available online
- Optionally configurable as 6-channel amplifier with a total of 8 DSP channels
- Freely configurable 2-channel Pre Out for the connection of additional amplifiers
- Adjustable input sensitivity from 11V to 5V
- Automatic remote switch
- Smart high-level input with ADEP.2 circuit
- High-level input EQs
- Control input for optional cable remote control
- State-of-the-art SMD technology for a more compact design and maximum reliability
- Four-layer printed circuit boards for best possible power and signal transmission
Special features
MATCH Extension Card slot
It is possible to extend the functionality of the MATCH PP 62DSP amplifier by
inserting an optional MATCH Extension Card (MEC) – for example a Bluetooth®
Audio Streaming module, an optical digital input or an AUX input.
Smart high-level input ADEP.2
The latest generation of OE car radios incorporates sophisticated
possibilities of diagnosing the connected speakers. If an usual amplifier will
be hooked up, failure messages and loss of specific features (e.g. fader
function) are often the result. Additionally new power stage concepts in some
radios may cause asymmetrical output signals which lead to distortion in the
AD converters.
The new ADEP.2 circuit (Advanced Diagnostics Error Protection, 2nd generation)
avoids all these problems without loading the speaker outputs of the OE radio
during high volumes unnecessarily.
Power Save Mode
The “Power Save Mode” is incorporated in all car-specific setups as well as in the basic setup of the DSP PC-Tool software. It allows to significantly reduce the power consumption of the PP 62DSP (or any additional connected amplifier) once there’s no input signal for more than 60 seconds. Please note that in many up-to-date cars with “CAN” or any other internal bus structures it may happen that the car radio (and therefore the PP 62DSP as well) remains “invisibly” turned on for up to 45 min. after leaving the car! Once the “Power Save Mode” is active the output stages of the PP 62DSP and its remote output will be turned off, thus reducing current draw to less than 250 mA. The amp will turn again to full operation within 2 sec. if a music signal is applied. It is possible to either modify the turn-off time of 60 sec. or completely deactivate the “Power Save made” via the DSP PCTool.
MicroSD
The MicroSD card reader allows to easily configure the DSP inside the
amplifier without the need of directly connecting a personal computer. A large
number of car-specific setups is available for free on www.audiotec-
fischer.com.
Simply download your desired setup and copy it to any MicroSD card. Finally
insert the MicroSD card into the PP 62DSP and the copy process will start
automatically. After that the amplifier is perfectly programmed to
dramatically upgrade the sound quality of your car factory audio system.
Note: “The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Audited Fischer GmbH is
under license. Other trademarks and trade names are those of their respective
owners.”