MeCam Date And Time Instruction Manual
- June 8, 2024
- MeCam
Table of Contents
To set the MeCam date and time stamp follow these directions
- In the root of the removable drive (MeCam drive that pops up on your computer when MeCam is plugged in) create a time.txt file (make sure to do this in the root of the removable drive, not the DCIM drive) Do this by right clicking while in the removable drive and select -àNew -à Text Document.
- Save and name this file, time.txt When Notepad opens, type the current date & time per this example: For 3:12pm, Feb 04, 2013, type: 2013-02-04 15:12:01
- File contents must be in format: yyyy-mm-dd hh:mm:ss
- Exit Notepad and save the file. Disconnect and reconnect the USB cable. Record a short amount of video
The time.txt file has been installed and is no longer visible.
Example of the time.txt
MeCam Date And Time Instruction Manual – Download
[optimized]
MeCam Date And Time Instruction Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>