JASCO ZWN4107 Plug In Smart Switch User Manual

Plug-in Smart switch

**ZWN4107

Z-Wave certified wireless lighting control**

ZWN4107 Plug In Smart Switch

Thank you for your purchase!

Scan code or visit byjasco.com/767241
Instructions made easy Read instructions or watch easy-to-follow video.

https://byjasco.com/register-your-product

Register your product Receive exclusive deals and register your product.
Scan code or visit byjasco.com/deals.

For additional JascoPro Series products, visit our website www.jascopro.com.
Like our product?
Leave a review on your favorite retailer website or amazon.com.
Having problems?
Let us know how we can help.
Call 1-800-654-8483 between 7AM-8PM, M-F, Central Time.

ADDING YOUR DEVICE TO A Z-WAVE NETWORK

1. Follow the instructions for your Z-Wave certified controller to add a device to the 2-Wave network.
2. Once the controller Is ready to add your device, press the program button of the smart switch. You have complete control to turn your lamp ON/OFF according to groups. scenes, schedules and interactive automations programmed by your controller. If your Z-Wave certified controller features remote access, you can control your lamp from your mobile dmnas If prompted by the controller to enter the 52 security code. refer to the OR code/security number on the side of the box or the OR code label on the product (see Figure 1). Enter the 5-digit code.
   Figure 1:

TO REMOVE AND RESET THE DEVICE

1. Follow the instructions for your 2-Wave certified controler to remove a device from the Z-Wave network.
2. Once the controller is ready to remove your device. press the program button of the smart switch.

TO RETURN YOUR SWITCH TO FACTORY DEFAULTS

1. If plugged in. unplug the switch from the receptacle
2. Press and hold the program button for at least three seconds while you plug the switch into a receptacle.
   NOTE: this should only be used If yourneMVrkSprimary controller Le missing or otherwise inoperable.
   NOTE: SmanStart enabled products can be added into a Z-Wave network by scanning the OR code on the product with a conbolier providing SmartStart inclusion. No further action is required and the SmartStart product will be added automatically within JO minutes of being switched on M the network vicinity

FEATURES

Must not exceed 600W (5A) incandescent, 1800W (15A) resistive or 1/2HP motor

• Two Z-Wave controlled AC outlets for LED, CFL, incandescent and halogen lights as well as small appliances
• Remote ON/OFF operation via the Z-Wave controller
• Manual ON/OFF control with the front-mounted push button
• Space-efficient design
• Grounded three-wire power connection for safety
• This Z-Wave device has advanced features that allow you to customize your experience. These features can only be adjusted by a Z-Wave enabled controller that supports the Z-Wave configuration command class. For a complete list of adjustable configurations, visit www.ezzwave.com/config
• Supports Z-Wave Long Range — requires Z-Wave hub that supports Z-Wave Long Range
• Can be added as a Z-Wave Long Range or standard Z-Wave device

A. Manual/program button Single press — turn ON/OFF the device Single press — include or exclude in Z-Wave network
B. LED indicator
C. Z-Wave controlled outlets — both outlets are controlled together and can remotely turn ON/OFF the connected device(s)
CYCLE LED
The LED behind the program button acts as a guide light or status indicator. How to cycle through options:
Press program button 10 times quickly.

1. LED is ON when the load is ON (indicates the outlet is ON) (default)
2. LED is always OFF
3. LED is always ON
4. LED is ON when the load is OFF (guide light in the dark)

PLUGGING IN YOUR Z-WAVE DEVICE

Plug in the smart switch to an indoor grounded outlet.
NOTE: Plug directly into outlet Do not use with extension cords.Plug the device to be controlled into the Z-Wave controlled outlet. Be sure the power switch on the controlled device is in the ON position. The manuaVprogram button on the smart switch allows the user to:

1. Manually turn OWOFF the connected device.
2. Add/remove the smart switch from the network.

SPECIFICATIONS IMPORTANT!

Power: 125VAC, 60Hz
Signal (frequency): 908. 10MHz, 908. 12MHz, 916MHz, 912MHz, 920muz
Maximum load: 600W (5A) tungsten, 1/2HP motor or 1800W (15A) resistive
Wireless range (Classic): Up to 150ft. line of sight between the wireless controller and the closest 7-Wave receiver module
Wireless range (Long Range): Up to 1300ft. line of sight to the wireless controller
Operating temperature range 32-104° F (0-40° C) For indoor use only
Specifications subject to change without notice due to continuing product improvement
NOT FOR USE WITH MEDICAL OR LIFE-SUPPORT
EQUIPMENT Z-WAVE ENABLED DEVICES SHOULD NEVER BE USED TO SUPPLY POWER TO OR CONTROL THE ON/OFF STATUS OF MEDICAL OR LIFE-SUPPORT EQUIPMENT.
Z-WAVE INTEROPERABILITY
This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
This device supports association command class (3 Groups)

• Association Group 1 supports Lifeline, Binary Switch Report
• Association Group 2 supports Basic Set and is controlled by pressing the ON or OFF button with the local load
• Association Group 3 supports Basic Set and is controlled by double pressing the ON or OFF button
• Each Association Group supports 5 total nodes

For product patent information, visit www.byjasco.com/patents.
All brand names shown are trademarks of their respective owners.
MADE IN VIETNAM
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product has a 5-year limited warranty. Visit wwvv.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483, M-F, 7AM-8PM Central Time.
(c)JASCO 2023 I ZWN4108 1 76724 1 06/26/23 v1
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator&your body.

WARRANTY

Jasco Products Comoeny werrants this oroouct to be free from manufacturing defects for five years from the original date of consumer purchase. This warranty is limited to the reoair or replacement of this product only and does not exterd to consequential or incidental oamage to other orooucts that may be used with this product. This warranty is in lieu of all other warranties, expressed or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damage, so the above limitations may nct apply to you. This warrarty gives you specific rights and you may also have other rights which vary from state to state. Please contact our J.S.-based Consumer Care at 1-800-654-3483 (option 1), M-F, 7AM-8PM Central Time or www.byjasco.com if the unit should oeove defeclive wilhin the warranly period.
WARNING
RISK OF FIRE
RISK OF ELECTRICAL SHOCK
RISK OF BURNS
TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS PRODUCT HAS A GROUNDING PLUG THAT HAS A THIRD (GROUNDING) PIN. THIS PLUG WILL ONLY FIT INTO A GROUNDING TYPE POWER OUTLET. IF THE PLUG DOES NOT FIT INTO OUTLET. CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE PROPER OUTLET. DO NOT CHANGE THE PLUG IN ANY WAY.
CONTROLLING APPLIANCES
CAUTION: TO REDUCE THE RISK OF OVERHEATING AND POSSIBLE DAMAGE TO
OTHER EQUIPMENT

• DO NOT EXCEED RATINGS
• DO NOT USE TO CONTROL ANY DEVICE WHERE UNINTENDED OPERATION COULD CAUSE UNSAFE CONDITIONS (HEAT LAMP, SUN LAMP, ETC.)
• DO NOT USE WITH EXTENSION CORDS
• FOR INDOOR USE ONLY

FCC/IC

Suppliers Declaration of Conformity
Model 14: ZWN1107
Jasco Products Co., 10 E. Memorial Rd., Oklahoma City OK 73114, www.byjasco.com
This device complies with Part 15 of the FCCIRSS rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-5(B)/NMB-5(B)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>