MT-VIKI MT-HD0112 12 Port HDMI Video Splicer User Manual
- May 15, 2024
- MT-VIKI
Table of Contents
MT-VIKI MT-HD0112 12 Port HDMI Video Splicer
Introduction
It is a simple 12-picture splicing processor, which can realize 12-picture splicing or single-screen display. Adopting unique embedded hardware design, it can accept input from various Image signal sources, and output HDMI without distortion in real time after segmentation and amplification. Its basic function is to divide and amplify the HDMI signal input from the outside, and after forming a full-screen image, output It from the 12 HDMI ports directly to the terminal display device to realize the splicing display.
The image splicing processor can support the mixed mode of input splicing pictures and non-splicing pictures, and display them on different screens at the same time. Customers can combine them into any splicing scheme and display them through the cascade mode. The HDMI image splicing processor adopts cutting-edge processing technologies such as motion detection and compensation operations, interpolation operations, edge smoothing processing and clutter signal suppression.
Feature
- Full hardware architecture, no software settings, plug and play.
- Support audio input and output.
- Support power-off memory function.
- Resolution support 1280720P@60Hz / 19201080@60Hz.
- Switch mode: remote control switch, panel key switch.
- The 16 modes of splicing can be changed at will: 1X1, 2X1, 3X1, 2X2, 4X1, 2X3, 3X2, 2X4, 4X2, 2XS, 2X6, 3X3, 3X4, 4X3, SX2, 6X2. The factory default is 1X1 splicing mode. SX2, 6X2. The factory default is 1X1 splicing mode.
Interface Description
- power supply
- output
- input
- infrared receiving
- power indicator
- mode switching
- power on/off
Connection Diagram
Installation
- Connect the power supply (12V DC).
- Connect the input signal to the HDMI input interface.
- Connect the terminal splicing display to the HDMI output port.
Splicing Mode
1×1
2×1
3X1
2×2
4X1
2X3
3X2
2X4
4X2
2X5
2X6
3X3
3X4
4X3
5X2
6X2
Remote Control Instruction
Note: Switching the splicing mode requires reconnecting the cable.
Product Parameters
| Name | Specification |
|---|---|
| Input | HDMlx1 |
| Output | HDMlx12 |
| Resolution | Support 720P/1080P, backward compatibility |
| HOMI Version | 1.4 |
| HDCP Version | 1.4 |
| Color Depth | 24 bit,16.77 million colors |
| Identi ficat ion Method | Auto |
| Output Format | Simultaneous output of digital video and 12S digital audio |
| Output Refresh Rate | 60Hz |
| Supply Voltage | DC12V |
| Maximum Power Consumption |
12W
Display Unit| 12
Operating Temperature| O°C-65°C
Working Humidity| Relative humidity less than 95%
Shel l| Metal
Dimension| 39.2×8.3×3.3cm
Weight| 0.67kg
Warranty| 1 year
Common Malfunctions
| Phenomenon | Approach |
|---|
Can’t turn on (power indicator light is off)
| 1. Check whether the power adapter cable is damaged.
2. Whether the power supply has been connected.
3. Confirm whether the power supply is normal.
No signal on single or multiple interfaces| 1. Check whether the input interface has a signal and whether it is in good contact with the signal source end
2. Replace a HDMI cable to test.
3. Whether the input signal exceeds the input range of this product
Packing List
- HDMI Splicer / x1
- Foot pad / x4
- Power / x1
- Infrared remote control / x1
- Manual / x1
- Hanging ear / x2