MT-VIKI V22121 Seamless HDMI Matrix User Manual

MT-VIKI V22121 Seamless HDMI Matrix

Product Information

Product Introduction
The 4K30 HDMI Matrix Switcher is a device that allows you to switch between multiple HDMI inputs and outputs. It supports seamless switching, WEB GUI, and APP control.

Product Features

• Fixed 1.5 U chassis height
• Supports 4/8 HDMI inputs with EDID management and 3.5mm audio embedded function
• Supports 4/8 HDMI outputs with 3.5mm audio de-embedded function
• The input and output resolution can go up to 4K30
• Supports Video wall and seamless switching
• Supports dual LAN and RS232 ports for backup control
• Front buttons with background lights for easy operation
• Supports auto saving protection and auto recovery function in case of power cuts

Technical Datasheet

Description| Input| Output| Protocol Standard| Color Space| Resolution| Distance| Control| Power Consumption| Dimension| Weight| Work Temperature| Storage Temperature
---|---|---|---|---|---|---|---|---|---|---|---|---
| 4/8 HDMI input ports with 4-PIN DIP EDID, 4/8 audio
embedded| 4/8 HDMI output ports with 4-PIN DIP EDID, 4/8 audio
de-embedded| TCP/IP/WEB/APP control| –| Up to 4K30| –| LAN, RS232| –| 1.5U, 48428067(mm)| 6kg/13.22lbs (No Cards)| 0°C to 50°C| -20°C to 55°C

Product Usage Instructions

Equipment Connection Diagram (Diagram not provided in the text)

Equipment Operation and Instruction
The LCD display screen will light up after power is turned on. It shows the current operation status. Press the MENU button to cycle between VIEW, SWITCH, SCENE, and SETUP interfaces. The default interface is VIEW.

Front buttons switching operation

Switching operation
To perform switching using the front buttons, follow these steps:

1. Press the MENU button to enter the SWITCH interface.
2. Select an input by pressing the corresponding input button (1-8).
3. Select an output by pressing the corresponding output button (1-8).

Safety Reminder

To protect the device and operating personnel from electrostatic discharge, you need to check and ensure that the device is grounding well before the device is powered on. Please observe the following when you install, use, maintain this equipment. Make sure the device ground connection.

Disposal Instruction (US)

• For better protection of our earth, please don’t throw this electronic device into municipal trash bin when discarding.
• To minimize pollution and ensure utmost protection of the global environment, please recycle the product. For more information about the collection and recycling of Waste Electrical and Electronic Equipment (WEEE), please contact your local dealers.

Safety Instructions

1. Please read these safety instructions carefully.
2.  Please keep this User Manual for later reference.
3. Please disconnect this equipment from connector before cleaning. Don’t use liquid or prayed detergent for cleaning. Use moisture sheet or cloth for cleaning.
4. Make sure the equipment is connected to the power source with the correct voltage, frequency, and ampere.
5. All cautions and warnings on the equipment should be noted.
6. Never pour any liquid into opening, this could cause fire or electrical shock.
7. Never open the equipment. For safety reason, the equipment should only be opened by qualified service personnel.
8. If one of the following situations arises, get the equipment checked by a service personnel :
9. Liquid has penetrated into the equipment.
10. The equipment has been exposed to moisture.
11. The equipment has not work well or you can not get it work according to user’s manual.
12. The equipment has dropped and damaged.
13. If the equipment has obvious sign of breakage.
14. Ambient operation temperature: 0 ~ 45 degrees.
15. Risk of overheating! Don’t put operating/installing equipment inside too closed space, be sure the installation space at least 1 to 2 inches or 2 to 5 cm of space for ventilation. To ensure that other objects do not cover the equipment.

• Notice: Peripheral devices
  Only peripherals (input/output devices, terminals, player, etc.) certified to comply with Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

• Caution
  Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this equipment.

Product Introduction

• This is a 4K30 seamless HDMI matrix switcher with the user-friendly WEB GUI, APP control and video wall function.
• With uncompressed transmission technology for the digital signal to make sure the image High fidelity output. Unique signal links shielding designing technology to make sure the signal completeness, the internal data switch has super strong capacity of resisting disturbance and long continuous and stable working ability. Supports dual LAN and RS232 backup control, it’s convenient for users to control via PC, iPad, APP and the 3rd parties central control by the the RS232 control commands.
• With the dual RS232 and LAN control, users also can simply set up and control the surrounding equipment, such as the projector, electric curtain and TVs.
• This matrix switchers have been widely used in the conferencing, radio & television project, multimedia conferencing hall, large screen display project, television teaching, command control center and so on applications.

Product Features

• Fixed 1.5 U chassis height
• Supports 4/8 HDMI inputs with EDID management and 3.5mm audio embedded function
• Supports 4/8 HDMI outputs with 3.5mm audio de-embedded function
• The input and output resolution can up to 4K30
• Support Video wall and seamless switching
• Support dual LAN and RS232 ports for backup control
• Front buttons with background lights, easier to operate at any time
• Support auto saving protection and auto recovery function while power cut

Technical Datasheet

background light
Power| AC: 110V—260V 50/60Hz
Consumption| 8.5W~45W when fully loaded
Dimension| 1.5U, 48428067(mm), the rubber feet are 15mm, so the total height with rubber feet are 82mm
Weight| 6kg/ 13.22lbs (No Cards)
Work Temperature| 0℃ ~50℃
Storage Temperature| -20℃ ~55℃

Packing Details

• Matrix switch chassis with customized configuration ……………………………………1 unit
• Power adapter …………………………………………………………………………………………1 pcs
• User manual ……………………………………………………………………………………………1 pcs
• RS232 cable …………………………………………………………………………………………….1pcs
• IR remoter controller ………………………………………………………………………………..1pcs
• Mounting rack ………………………………………………………………………………………….1 pair

Panels

Front Panel

• 4×4
• 8×8

Setup
UP| Upward and short cut button for switching to ALL outputs
SAVE| For saving the scene or setup
ENTER| Enter button
DOWN| Downward and short cut button for canceling to ALL outputs
RECALL| For recalling the saved scene

Rear Panel:

• 4×4
• 8×8

Equipment Connection Diagram

Equipment Operation and Instruction

The LCD display screen will light up after power and turned on. It shows the current operation status, press MENU button, it will keep recycling between VIEW, SWITCH, SCENE, SETUP four different interface. The default interface is VIEW. The following description, 8×8 matrix switch as an example

Font buttons switching operation

1. Switching operation
   Switching with industry 2-key fast switching, first press the input button and then select/press output button. Details are as follow:

2. There are 8 input buttons, 8 output buttons. First press MENU to show SWITCH interface, then can continue the next switching step

3. Press input number at the INPUT area, the input button will light up with blue light

4. Then press output number at the OUTPUT area, and the output button will light up. Users also can press the UP button to realize 1 to ALL switching.
   If need to cancel switching, can press the button again to cancel, After canceling, the light will turn off. Users also can press the DOWN button to cancel all outputs

5. Scene Operation

6. The system can save 40 scenes, after switching successfully in the SWITCH interface, press MENU button and switch to SCENE interface.

7. Enter the wanted scene save number(1~8), then press SAVE. If want to reload the saved scene, press the scene number and press RECALL button
   Note: Limit saves 8 scenes if via panel button to save scene

8. Setup Operation

9. First press MENU switch to SETUP interface, then continue next operation

10. Via SETUP, it can realize IP address changing, in SETUP interface can use UP/ DOWN button to position, enter the needed IP address from the left button side, then press SAVE button to save. Should restart the matrix switch to take effect after modified.

11. View Operation
    Via MENU button switch to VIEW interface, will display the current switching status

12. WEB Control
    The default IP address are 192.168.0.80(LAN1) and 192.168.1.80(LAN2).
    Accordingly to connected LAN port, enter the corresponding IP address, (Recommend with Google Chrome) as below: Note: The default user name and password is the same: admin, click login after entering. Please make sure the control PC is at the same IP segment.

Switch
Switch interface:

• Users can do the input sources switching by clicking the Input buttons first, then pressing the Output buttons. Such as switch input 2 to output 4, please press the input buttons 2, then press output buttons 4 will achieve Switching.
• Or users can use the shortcut buttons on the right for the fast switching:

| Switch one input to all the outputs
---|---
| Close one input to all the outputs
| Switch all inputs on all corresponding outputs
| Close all inputs to all corresponding outputs
| Switch to the scenes Save and Recall interface

Users also can do the Video wall settings on the WEB GUI bottom by simply adding the x&y(x: for the rows; y: for column). Below the steps to create the video walls:

1. Step1: Enter the video wall Row(x) and column(y) numbers, and then click “add”, example to create a 2×2:
2. Step 2: Click “add” to create the 2×2 video wall, then drag the outputs to the video wall box.

To delete the video wall, users will only need to enter the video wall number in the del box and click “del’.

Scene
Scene Interface: It can support 40 scenes in total, users can preview each scene switching status by clicking on any of the scene number. Click “Save” to save the switching status, and “Load” to recall the scenes. “Back” to return back to the switch interface.

Caption:

• For changing the input, output and scenes’ name
• Users can rename the scenes, input and output names here, users can change all the names and then need to click the “Save” button on the right. After renamed the names, users will see the input, output and the scenes names have changed once click to the “Switch” and “Scenes” interface. With this renaming function, it can be easier for the users to know the sources and ends.

Setup
Setup interface: Users can reboot, change the IP address, set up the login user names, language and the RS232 baud rate settings here. After changed the IP address, will need to reboot the matrix switcher, then the new IP address will take effect.

• There are five parts in the setup interface. The first part is System. Generally, it needs to reboot after modifying some configurations of the matrix switch, such as IP address, user name, and login password. The second part is Ethernet (note that the IP addresses of the two networks cannot be in the same network segment). The third part is the Users( user name and password can be changed), the forth part is more(set the language and baud rate), and the last part is the Multi-function buttons.
• Click reboot to restart the matrix switch.
• The IP address of the device can be changed in the Ethernet area. The default is to restore the factory settings, the reload is to rename, and the save is to save the settings. After changing the IP address, first click Save, then click Reboot, and it will take effect after the system restarts. , otherwise the modification fails.
• The third is to go to the users, you can change the user name and password, and click save after the change is completed.
• Multi-function button, you can set the shortcut key of the multi-function button, save it after setting, restart the system, you will go to the switching interface, press the button below to control the device (note: when the matrix switch serial port is not connected to peripheral devices, it is a shortcut for scene call button).
• For example, the serial port 1 of the matrix is connected to the serial port of a certain projector. To set on and off for the projector, change button1 to “projector-on”, change button2 to “projector-off”, and write the Serial port code command of projector on and off in the middle, choose 1, and fill in the baud rate of the projector in the box. as shown in the picture

More: Upgrade interface
Click “more” to select upgrade to enter the upgrade interface. Then click Browse, select the upgrade file, and click Upgrade to upgrade the device, as shown in the figure below

Manager

• This Manager interface, it allows the users to manage at most 254 units of the matrices which are installed at the same area network and at the same gateway but different IP addresses. As below are showing 3 matrices, users can rename each matrix and click button to do the switching or open in a new manage window.
• As shown in the figure below, the connection IPs are 192.168.1.80, 192.1.168.1.88, and 192.1.168.100, 3 matrix switches. Click research to search for controllable matrices. It supports renaming the names of different matrices switch. If you want to name 192.168.1.80 as the 2F Meeting Room, enter the 2F Meeting Room in the input box and click rename.
• Click the corresponding IP address to switch the matrix

APP Control

The matrix switchers also can support the iOS and Android APP control, users can search the keyword “Matrix Control System” in Apple store or the Google Play Store.

1. Step 1 : Make sure the matrix well connected with the WIFI router, and the iPad/Android devices are connected to this same WIFI. Then open on the MCS(matrix control system) APP and Enter the IP address of the matrix switcher(the default IP addresses are: 192.168.0.80 or 192.168.1.80):
2. Step 2: After Enter the IP address, it will need to login, the default user name and password both are the admin:
3. Step 3 : After log in successfully, users can do the same functions as the WEB GUI operation:

IR Remote Control

• Source switching: Press input number—Press ‘AUTO’—-Then press output number—–ENTER Eg, switch input 1 to output 1, INPUT1—AUTO—-OUTPUT1—ENTER
• Scene save : Press the number from INPUT—-SAVE Eg, save the current status to Scene 2, 2(from input section)—SAVE
• Scene recall : Press the number from INPUT—-RECALL Eg, Recall the save Scene 2, 2(from input section)—RECALL
  Note: Other menus on the remote control, the return button, has no defined function, and it is invalid after pressing the button

COM and TCP/IP Control Commands

• RS232 cable with straight-through connection(USB-RS232 can be used directly to control) Communication protocol:
  • Baud rate: 115200
  • Data bit: 8
  • Stop bit: 1
  • Check bit : None

The TCP port is 5000 and UDP is 4000

switch input 1 to all outputs
All1.| One to one| Switch all the channels to be one to one. Eg.1->1， 2->2，3->3……
YXZ.| Y=1,2,3,4…… Z=1,2,3,4……| Switch Input Y to Output Z Eg. “ 1X2. ” means switch Input 1 to output 2
YXZ&Q&W.|

• Y=1,2,3,4……
• Z=1,2,3,4……
• Q=1,2,3,4……
• W=1,2,3,4……

| Switch Input Y to Output Z, Q, W Eg. “ 1X2 &3&4.” means switch Input 1 to Output 2, 3, 4
SaveY.| Y=1,2,3,4……|

• Save current status to scene Y
• Eg. “ Save2.” means saving current status to Scene 2

---|---|---
RecallY.| Y=1,2,3,4……|

• Recall the saved scene Y
• Eg. “ Recall2.” means recall the saved Scene 2

BeepON.|

Beep sound

| Buzzer on
BeepOFF.| Buzzer off
Y?.| Y=1,2,3,4…….|

• Check the Input Y to outputs switching status
• Eg. “ 1?. ” means to check Input 1 switching status

Note:

• Every command ends with a period “.” and it can’t be missing.
• The letter can be capital or small letter.
• Switch success will return as “OK”, and failed will return as “ERR”.’
• The number of input and output is related to the number of channels of the matrix switch. If it is an 8×8 matrix switch, the maximum number is 8

Input card EDID and Output card control
For the red 4-PIN DIP switch on the input cards, for the EDID management and Audio selection

DIP 1| DIP 2| DIP 3| Functions| DIP 4( For audio selection)
---|---|---|---|---
0| 0| 0| Pass-through| 1: For 3.5mm embedded audio
0| 0| 1| DVI-1080| 0: For using the HDMI audio
0| 1| 0| DVI-1200|
1| 0| 0| 1080P2.1
0| 1| 1| 1440*900
1| 0| 1| HDMI-1200
1| 1| 0| 4k2.1

Trouble Shooting and Attention

No signal on the display?

• Make sure all the power code well connected
• Check the display switcher and make sure it’s in good condition
• Make sure the signal sources are on
• Check the cables between the devices and displays are connected correctly.
• Make sure the resolution less than WUXGA(1920*1200)/ 60HZ
• Make sure the display can support the output resolution.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>