MT-VIKI MT-17308HL 16 Port KVM Console HDMI Instruction Manual

: June 15, 2024
: MT-VIKI

Table of Contents

MT-VIKI MT-17308HL 16 Port KVM Console HDMI
Product Specifications
Product Usage Instructions
Description
Feature
Product Specifications
Panel instruction
Connection Diagram
Installation
Product Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MT-VIKI MT-17308HL 16 Port KVM Console HDMI

MT-VIKI-MT-17308HL-16-Port-KVM-Console-HDMI-PRODUCT

Product Specifications

Display screen type: LED screen
Size: 17.3 inches
Resolution: 1920*1080P
Color: 16.7M Colors (RGB 6-bit data+HIFRC data)
Brightness: 400cd/m2 (Typ)
Contrast: 600:1 (Typ)
Pixel interval: 0.1989 per one triad)x0.1989
Lifetime : 50,000 Hrs
Consumption: 17W (Typ)
Keyboard compatibility: IMB/AT, support Microsoft Windows9X/Me/nt/2K/XP
Keyboard interface: USB (>1,000,000 times lifetime)
Mouse touch panel(2 button) compatibility: USB, Support Windows series, MAC, etc.
Mouse touch panel(2 button) interface: USB (>1,000,000 times lifetime)
Power: DC12V
Housing color: Black
Housing material: Aluminum
Housing dimensions: 480x600x45 mm
Cabinet installation depth: 600mm-810mm (Use suitable mounting ears)
Operating Temperature: -45~60 °C
Storage Temperature: -20~60 °C

Product Usage Instructions

Installation
Before installing, make sure to adjust the fixed mounting rack of the cabinet to the installation position of the standard server:

Open the rear door of the cabinet and select the right height.
Install the KVM modular and bracket to the cabinet.
At the front end of the cabinet, insert the display to the bracket and then fix the cabinet screws.

Description

Combined LED KVM switch is the console platform for the new server room. Abandon the defects of traditional KVM switches. KVM module, screen display, and bracket tray can be easily separated. This series KVM switch console has the unique of high effective, easy usage, convenient management save cost remote management and energy saving The height is standard 1U suitable for 19-inch bracket structure can save above 85 usage space of cabinet Adopt Al case easy and simple carry in and out at any time with good corrosion resistance and heat dissipation function

Feature

HDMI input interface
One local HDMI output, a resolution up to 19201080P@60Hz The size of the screen is 17.3 inches, and the highest resolution is 19201080P@60Hz
Built-in keyboard and touch mouse
Support external USB keyboard and mouse
With buzzer
Support EDID
With OSD function, two OSD menus: 1. screen OSD and KVM OSD With original HDMI KVM cables
Support IAP update software function

Product Specifications

LED

screen

| Display screen

type

| 17.3″FHD Color
---|---|---
Size| 439.42（17.3″）
Resolution| 1920*1080P
Color| 16.7M Colors (RGB 6-bit data+HIFRC data)
Brightness| 400cd/m2(Typ)
Contrast| 600:1（Typ)
Pixel interval| 0.1989（per one triad)x0.1989
Lifetime| 50,000 Hrs
Consumption| 17W（Typ)

Built

keyboard

| Keyboard| 98
Compatibility| IMB/AT, support Microsoft Windows9X，/Me/nt/2K/XP
Keyboard

interface

| USB
Lifetime| >1.000.000times

Mouse touch panel(2 button)

（W×D×H）

| 480x600x45
Cabinet installation

depth

| 600mm-810mm（Use suitable mounting ears）
Operation

Temp

| -45~60℃
Storage

Temp

| -20~60℃

Panel instruction

MT-VIKI-MT-17308HL-16-Port-KVM-Console-HDMI-FIG-1

If you want to use Caps mode please press Home Caps first

Caps Mode

Caps+Caps+1,2….. Switch the corresponding interface
The combination hot-key should be complete within 2 seconds. Eng: submit 13th, press “3” within two seconds after pressing 1 to complete the switching to interface 13th
Caps+Caps+ Switch to the next interface
Caps+Caps+ Switch to the previous interface
Caps +Caps+B Turn on or off buzzer
Caps+Caps+S Auto scanning, press any key to exit, it will stop at current port
Caps+Caps+|+Num+Enter Set the auto-scanning intervals, Value from 5 to 999

If want to return to default mode, please press Caps+ Caps + Home. Use a similar method to enter another mode.

Connection Diagram

MT-VIKI-MT-17308HL-16-Port-KVM-Console-HDMI-FIG-12

Default commands

Home + Home +1,2….. Switch corresponding interface Combination hot-key should complete within 2 seconds. Eng: submit 13th, press “3” within two seconds after pressing 1 to complete the switching to interface 13th
Home+ Home+ Switch to the next interface
Home+ Home+ Switch to the previous interface
Home+ Home+B Turn on or off the buzzer
Home+ Home+S Auto scanning, press any key to exit, it will stop at the current port
Home + Home+|+Num+Enter Set the auto-scanning intervals, Value from 5 to 990

Installation

Must adjust the fixed mounting rack of the cabinet to the installation position of the standard server before install.

Step 1 Open the rear door of the cabinet select the,right height install the KVM modular and bracket to cabinet
Step 2 At the front end of the cabinet insert the display, to the bracket, and then fix the cabinet screws
Step 3 Connect KVM modular and display via DVI cable
Step 4 Connect the KVM switch and servers via the KVM cable
Step 5 Connect the power adapter installation, completed

Buzzer: Can be off and on via hotkey and OSD menu
When the buzzer is on, press the hotkey home+home+B once, the buzzer is turned off, and the hotkey repeated buzzer is turned on. B When the buzzer is on, press home+home+Enter to recall the OSD menu, press F3 to enter the System, use the on keyboard()to select the “Buzzer” option, press “ENTER” to confirm the selection, use the on keyboard()to adjust, OFF close, ON to open

Hot-key –

Home Enter Enter KVM OSD default mode
Home Caps Enter hot-key Caps mode
Home Scroll Enter hot-key Scroll mode
Home Home Num Enter hot-key Num mode

Note : When in the KVM OSD menu, the OSD cannot be operated F1: Naming: Press F1 in the OSD menu to customize the port name:
(Note) The maximum input is 14 characters, but when it contains W characters, the maximum input characters may be less than 14 characters

F2 1 Naming: Press F1 in the OSD menu to customize the port name: (Note) The maximum input is 14 characters, but when it contains characters, the maximum input characters may be less than 14 characters
F2 Scan Tag: In the OSD menu, press F2 to add a scan tag to the port
F3 System : in the OSD menu, press F3 to enter the system menu
F4 Auto Scan : In the OSD menu, press F4 to enter the port scan state
F5 Login: in the OSD menu, set the security setting to Yes, press F5
F6 Access : (as shown in the figure below), set user access permissions, 5 user access permissions can be set for each device.
None No automatic Switching
Power Automatic switching when the current USB interface with 5V voltage input Switch automatically to the corresponding USB interface with 5V voltage input
USB USB connects successfully to auto Switching which automatically
to the corresponding USB interface that successful USB connection
KVM Firmware version
Factory Default Yes

Note: this setting only restores the value of mode and time, User name, host name, and password will not be recovered.

MT-VIKI-MT-17308HL-16-Port-KVM-Console-HDMI-FIG-16

F7: Security setting (as shown in the figure below). When you select Yes, it means you need to enter the username and password every time you operate the device. If you select No, you don’t need it.
F1: Naming to modify the user name Remark) The maximum input is 14 characters, but when it contains W characters, the maximum input characters may be less than 14 characters
F4 Pin set a new password
(Remark) The password is 6 characters, but when it containsW characters, part of the character will be invisible, but it will not affect the password setting
F5: Show Pin to view the current password
Enter: Confirm: Confirm
ESC: Exit

MT-VIKI-MT-17308HL-16-Port-KVM-Console-HDMI-FIG-17

Buzzer “OFF” turns off sound, “ON” turns on sound
AutoScan Mode: Free Tag, USB: there is a port to connect to the USB interface
AutoScan Time “5” Press the key once to decrease by 5 seconds, and press the key once to increase by 5 seconds, the maximum value is 999, and the minimum value is 5
Banner Display Time: “5”, “10”, “15”, “30”, “60”, “90” options
Banner Display Position: Top left/ Top Center/Top Right
Plug Jump Mode The device will switch automatically when a USB plug-in.
- None No automatic Switching
- Power Automatic switching when the current USB interface with 5V voltage input Switch automatically to the corresponding USB interface that with 5V voltage input
- USB USB connects successfully to auto Switching which automatically to the corresponding USB interface that successful USB connection
KVM Firmware version
Factory Default Yes

NOTE: this setting only restores the value of mode and time, User name host name and password will do not be recovered

MT-VIKI-MT-17308HL-16-Port-KVM-Console-HDMI-FIG-19

Buzzer: Can be off and on via hotkey and OSD menu
When the buzzer is on, press the hotkey home+home+B once, the buzzer is turned off, and the hotkey repeated buzzer is turned on. B When the buzzer is on, press home+home+Enter to recall the OSD menu, press F3 to enter the System, use the ↓↑ on keyboard() to select the “Buzzer” option, press “ENTER” to confirm the selection, use the →← on keyboard()to adjust, OFF close, ON to open

Hot-key

Home Home Enter
Enter KVM OSD default mode
Home Home Caps
Enter hotkey Caps mode
Home Home Scroll
Enter hotkey Scroll mode
Home Home Num Enter hotkey Num mode

Default commands

Home + Home +1,2….. Switch the corresponding interface
The combination hotkey should be completed within 2 seconds.
Eng: submit 13th, press “3” within two seconds after pressing 1 to complete the switching to interface 13th
Home+Home+ Switch to the next interface
Home + Home+ Switch to the previous interface
Home+Home+B Turn on or off a buzzer
Home +Home+S Auto scanning, press any key to exit, it will stop at the current port
Home+Home+|+Num+Enter Set the auto-scanning intervals, Value from 5 to 999

If you want to use Caps mode please press home,+home Caps first+.

Caps Mode:

Caps+ Caps+1,2….. Switch the corresponding interface
The combination hot-key should be completed within 2 seconds. Eng: submit 13th, press “3” within two seconds after pressing 1 to complete the switching to interface 13th
Caps+Caps+ Switch to the next interface
Caps+Caps+ Switch to the previous interface
Caps+Caps+B Turn on or off the buzzer
Caps+Caps+S Auto scanning, press any key to exit, it will stop at the current port
Caps+Caps+|+Num+Enter Set the auto-scanning intervals, Value from 5 to 999

If want to return to default mode, please press Caps + Caps + Home. Use a similar method to enter another mode.