JISHO BK-A16 Portable Nail Drill User Manual

JISHO BK-A16 Portable Nail Drill

Specifications

Product Description

1. Switch button/F or R button
2. Battery indicator
3. “-” button speed down
4. “+” button speed up
5. Drill bit (Compatible with 3/32″ drill bit)
   

Drill Bit Instructions

• Long Cone Bit To polish nail sidewalls and cuticles
  

• Safety Bit
  For removing bulge parts on nail surfaces and nail polishing
  

• Needle Bit
  For nail carving and nail comer filing
  

• Large Barrel Bit
  For buffing nail surfaces, removing nail polish & acrylic nails
  

• Mandrel with Sanding Band
  For polishing hard and rough nails
  

• Short Cone Bit
  For removing calluses around the nail edges
  

• Small Barrel Bit
  For buffing nail surfaces and removing nail polish & acrylic nails
  

• Barrel Bit
  For polishing nail surfaces and remove calluses
  

• Umbrella Top Bit
  For polishing the nail surface for a smoother feeling
  

• Felted Wool Bit
  For polishing and cleaning debris on nail surfaces
  

• Coarse Disc Bit
  For polishing and exfoliating the edges after cutting nails
  

Preparation

※ Charging the device: Connect the Type-C charging cable to the device charging port and to the adapter (not included) to start charging. The indicator flashes red while the device is charging and turns flashing green when the battery reaches more than 30%.

※ The battery indicator flashes red when the battery is low. If the device runs out of battery, it will automatically shut down after the charging indicator flashes red for 10 seconds.

※ It takes about 1.5 hours for the device to be fully charged, and it can work continuously for about 2-4 hours after fully charged.

Drill Bits Installation

Step1: Hold the body in one hand and the drill bit in the other.

Step2: Insert / pull off the drill bit firmly.

Instructions

• Select and install accessories as needed. To install the drill bit, push it firmly into the top of the device until the head is firmly in place.
• Power on and rotation direction: Push the switch button down, to rotate the product forward. Push the button up, to rotate it backward. The device starts on the lowest speed setting by default.
• Speed up: Increase the Rotation Speed: Press and hold the “+” button, the speed will increase slowly, maximum to 20000 rpm.
• Speed down: Decrease the Rotation Speed: Press and hold the “-” button, the speed will decrease slowly, minimum to 6000 rpm.
• Turn off: Push the switch in the middle position, the product will turned off.
• Operate while charging: Allows to use the device while charging or wait for use after fully charged.
• Motor Lock Protection System: When the nail drill touches a hard surface with pressure, the device will automatically shut off after 20 seconds if you do not lift the nail drill from the surface.

Cleaning & Maintenance

1. Before starting cleaning the device, make sure it is powered off.
2. Do not immerse the device in water, accessories that can be disassembled shall be cleaned separately.
3. Use a clean cloth or a wrung-out wet cloth to clean the device surfaces.
4. Do not use any lubricants, cleaners, polishes, or air fresheners on this device

Safety Instructions

To ensure the proper operation of this device, please read this instruction manual carefully before using the device and keep it for further reference.

• Do not store this product for a long time in humid or high-temperature environment. If you do not intend to use the device for a long time, store it after the battery is full.
• The built-in battery of this device may contain substances that can pollute the environment. To dispose of the device, please remove the battery first. Do not dispose of the device or battery in a fire or household waste.
• The following people are not suitable to use this product: children, diabetic, those who have skin inflammation on fingers or toes, allergies, physical sensory or mental disabilities.
• Please stop using immediately and consult the doctor in time if you feel comfortable.
• The product is only for nail drilling, do not use for any other purposes.
• Do not disassemble, repair or transform this product by yourself.

FAQ

Check this troubleshooting section if you are experiencing any of the following issues. If you cannot find a solution and the problem persists, please, contact our Customer Service.

Q: The device does not work.
A: Check if the device needs to be charged; or if the device is in pause mode.

Q: The drill bit cannot fit the device, or it falls out.
A: You can also verify if the diameter of the drill bit is too large to fit the device bit entrance. The standard size of bit which compatible with the device is 3/32″

Q: The product has power, but it shuts down automatically.
A: You are touching a surface that is too hard. You can increase the speed intensity or remove the grinding bit from the surface.

Important Safety Instructions

“Warning – When using this product, basic precautions should always be followed

Including The Following:
Read all the instructions before use.

• Do not drop, knock, or disassemble the unit.
• Do not operate in wet or moist conditions.
• Do not use if it is damaged or modified in any manner.
• Do not expose to fire or extreme temperatures.
• Keep away from heat, flammables, poisons, and corrosive substance.
• Do not attempt to repair the appliance. If the device is damaged, it should be repaired or replaced by authorized professional.
• Dispose as per local law and regulations.

FCC Compliance

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference

received, including interference that may cause undesired operation.

WEEE Compliance

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.

MADE IN CHINA

Documents / Resources

| JISHO BK-A16 Portable Nail Drill [pdf] User Manual
BK-A16 Portable Nail Drill, BK-A16, Portable Nail Drill, Nail Drill, Drill
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>