Power Technologies AC-STAND-75 Interactive Flat Panel Stand and Cart User Manual

July 21, 2024
Power Technologies

panel not included

AC-STAND-75

INTERACTIVE FLAT PANEL STAND/CART USER MANUAL

Product Information

The AC-STAND-75 is designed to fit interactive flat panel displays up to 75 inches.
Please review this guide to learn how to safely use your product.

Specifications:
Model AC-STAND-75
VESA Dimensions Adjustable Mounting Brackets (mm) 200×200, 400×200,

400×300, 400X400, 600X400, 800X400
Exterior Dimensions| Inch| 232.5 (D) x 43.5 (W) & 62.5 (H)
mm| 5906 (D) x 1105 (W) & 1588 (H)
Product Weight (Weight Without Devices)| 122 lbs (55.33 kg)
Shipping Weight| 128 lbs (58.06 kg)
Maximum Display Size Supported| supports upto 86 inch (2184 mm)
Supported Devices| Wall mount televisions and flat panels
Power Specifications| NA
Charging Type| NA
Security| NA
Casters| Four 4” Casters; 2-Locking, 2- Directional
Work Platform Loading| 200 lbs (90.7 kg)
Working Temperature| NA
Working RH%| NA
Storage Temperature| NA
Storage RH%| 5% – 95%
Warranty| Lifetime Frame, 2 Years Components

Specifications subject to change without notice.

The AC-STAND-75 is designed to fit interactive flat panel displays up to 75 inches.

Please review this guide to learn how to safely use your product.

Power Technologies AC-STAND-75 1
Front View of Stand

  1. Mounting Strips
  2. Back Plate
  3. Middle Shelf
  4. Uprights
  • If the device (Laptop / Chromebook) thickness is more than the gap between the dividers, remove one of the dividers to create enough space for your device.

Power Technologies AC-STAND-75 2
Right View of Stand

  1. Base with Casters
  2. Brake/Lock Caster Wheels
  3. Directional Caster Wheels

panel not included

Installation Instructions
REMOVING FROM BOX

Step-1: Remove the strapping with scissors or plier cutters. Do not use a box cutter.

Step-2: Lift and Remove the top cardboard lid

Step-3: Your Stand arrives in 1 box and contains 4 layers for ease of assembly.

Layer 1                                                     Layer 2

Power Technologies AC-STAND-75 5

Layer 3                                                     Layer 4

Power Technologies AC-STAND-75 6

Identifying Parts
  1. Carefully remove all parts from box.
  2. Locate the bag of hardware as this will be needed roughout the installation.
  3. Lay parts out on a flat surface (see below).
  4. Ensure no parts are missing.

 Power Technologies AC-STAND-75 7

  1. Left/Right Mounting Strip
  2. Backplate
  3. Right Upright (holes face out)
  4. Middle Shelf
  5. Left/Right Upper Pillar
  6. Base with Casters
  7. Left Upright (holes face out)
  8. Hardware & Tool
Installation Instructions
SETTING UP STAND :

Step-1: Place the Base on a flat surface.
Step-2: Find the Uprights and ensure the holes are on the outside.
Step-3: Slide both left and right Uprights into the Base’s posts.
Step-4: Loosely fit the screws connecting the left and right uprights to the base of the stand. Do not fully tighten hardware at this point.

Power Technologies AC-STAND-75 8

Step-5: Find the Middle Shelf.
Step-6: Slide it in place so the notches are toward the long (back) edges of the Uprights.
Step-7: Loosely fit the screws on the outside of the left and right uprights to connect the middle shelf. Do not fully tighten hardware at this point.

Power Technologies AC-STAND-75 9

Step-8: Find the Left and Right Upper Pillars.
Step-9: Fit them into the Uprights so the 4 holes are facing the sides.
Step-10: Loosely fit the screws connecting the left and right upper pillars to the uprights. Do not fully tighten hardware at this point.

Power Technologies AC-STAND-75 10

Step-11: Find the Backplate.
Step-12: Facing the back of the stand, Fit the Backplate onto the Uprights so the post slides are facing you.
Step-13: Loosely fit the screws connecting the backplate onto the upper pillars. Do not fully tighten hardware at this point.
Step-14: Once the unit is in its desired position, extend the anti-tip support bar completely. Twist the bar clockwise until it clicks into a locked position to secure and stabilize the unit.

Power Technologies AC-STAND-75 11

Assembly

Step-15: Starting from the top, working to the bottom, tighten all hardware with the provided hex wrench.
Step-16: The Left and Right Mounting Strips are installed on your flat panel screen using your own VESA mounting bolts and hung onto the Backplate.

Power Technologies AC-STAND-75 12

Casters Positions

This cart is equipped with Casters that have an “Blue” color foot pedal.

Engage the Directional Locking Casters by pressing the blue foot pedal down. Your cart will now easily track in a straight line.

Release the Direction Lock by lifting up on the foot pedal. The cart will have its full swivel motion restored.

“Engage the BLACK foot pedal to securely lock the wheels, keeping the cart safely in place.”

“Engage the blue foot pedal for a seamless and precise straight-line movement, making navigation a breeze.”

“With a simple release of the BLACK foot pedal, allowing you to navigate effortless with unparalleled flexibility.

“With a simple release of the blue foot pedal, embrace a world of precision and grace in your swivel motion, making maneuvering a breeze.”

Safety Instructions

Important

Failuer to read, throughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty. It is the installer’s responsibility to make sure all mounting systems are properly assembled and installed using the instructions provided.

Failure to provide adequate structural strength for this mounting system can result in serious personal injury or damage to equipment. It is the installer’s responsibility to make sure the structure to which this mounting system is attached can support the combined weight of all equipment.

Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all accessories and components attached to the cart does not exceed 200 lbs (90.7 kg). Use with heavier televisions may result in instability causing tip over resulting in death or serious injury.

Use this mounting system only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.

Never operate this mounting system if it is damaged. Return the mounting system to a service center for examination and repair.

For warranty claims, please have the following information ready, then visit : www.powertechnologies.com

To create a help ticket.

Serial Number:
———————————————————————————–
Charging System Type:
———————————————————————————–
Date Of Purchase:
————————————————————————————
Reseller Name:
————————————————————————————
PO Number:
————————————————————————————

Further Information

For further information on this product and others, contact Power Technologies at.

Power Technologies
42035 Zevo Dr
Temecula, CA 92590+
888.650.4488

support@powertechnologies.com
www.powertechnologies.com

42035 Zevo Drive Temecula, CA 92590 | 888-650-4488 | www.powertechnologies.com

PT-AC-STAND-75 Manual_Rev2024-04

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals