STOLTZEN HERA U304 USB 3.2 Over HDBaseT 3.0 Extender User Manual

STOLTZEN HERA U304 USB 3.2 Over HDBaseT 3.0 Extender

Product Usage Instructions

• Introduction
  • The product is designed for long-distance signal transmission between a PC and USB devices.
• Features
  • Extension of USB 3.2 up to 100m/328ft over CAT6a cable
  • USB 3.2 connectivity with data transfer rate up to 5Gbps
  • Backward compatible with USB 2.0 and 1.1
  • Hardware acceleration for isochronous and bulk transfer
  • USB-A port 1 and 2 support 5V/1.5A, port 3 and 4 support 5V/1 Aon the Receiver
  • Supports RS-232 pass-through and FSYNC GPIO pass-through for industry camera use
  • Supports bi-directional 24V PoC
  • Simple plug and play, no driver and setting installation required

FAQs

• Q: What type of connectors are required for this product?
  • A: The product requires the use of UTP connectors. Please connect in the direct interconnection method and do not cross-connect.

Thank you for purchasing this product

• For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference.

Surge protection device recommended

• This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shocks, lightning strikes, etc.
• Use of surge protection systems is highly recommended to protect and extend the life of your equipment.

Caution

• The product requires the use of UTP connectors.
• Please connect in direct interconnection method and do not cross-connect.

Direct Interconnection Method

Introduction

• The Stoltzen HERA U304 USB 3.2 over HDBaseT 3.0 Extender – 5Gbps can extend the USB signal to a distance up to 100m/328ft via a single CAT6a cable.
• The transmitter features one USB 3.2 Type B input, one FSYSNC GPIO input, and one RS-232 pass-through. The receiver features four USB 3.2 Type A outputs, one FSYSNC GPIO output and one RS-232 pass-through.
• Bi-directional 24V PoC is also supported.
• The product can be widely used for long-distance signal transmission between a PC and USB devices.

Features

• Extension of USB 3.2 up to 100m/328ft over CAT6a cable
• USB 3.2 connectivity with data transfer rate up to 5Gbps
• Backward compatible with USB 2.0 and 1.1
• Hardware acceleration for isochronous and bulk transfer
• USB-A port 1 and 2 support 5V/1.5A, port 3 and 4 support 5V/1A on the Receiver
• Supports RS-232 pass-through and FSYNC GPIO pass-through (for industry camera use)
• Supports bi-directional 24V PoC
• Simple plug and play, no driver and setting installation required

Package Contents

• 1× Stoltzen HERA U304T USB 3.2 over HDBaseT 3.0 Extender (Transmitter)
• 1× Stoltzen HERA U304R USB 3.2 over HDBaseT 3.0 Extender (Receiver)
• 1× 24V/2A Locking Power Supply
• 2× 4pin-3.5mm Phoenix Connector (Male)
• 4× Mounting Ear
• 8× Machine Screw (KM3*4)
• 1× User Manual

Specifications

Technical

USB Protocol| USB 3.2
Transmission Rate| Up to 5Gbps
Network Bandwidth| 10G
Transmission Distance| 100m/328ft over CAT6a (F/FTP) cable
ESD Protection| IEC 61000-4-2:

±8kV (Air-gap discharge), ±4kV (Contact discharge)

Connections
Transmitter| Input: 1 × USB HOST [USB-B, 9pin Female] Output: 1 × HDBT OUT [RJ45, Female]

Control: 1 × RS-232 [3pin-3.5mm Phoenix Connector]

1 × FSYNC [1pin-3.5mm Phoenix Connector] 1 × SERVICE [USB-C, Update Port]

Receiver| Input:  1 × HDBT IN [RJ45, Female]

Output: 4 × USB Devices [USB-A, 9pin Female] Control: 1 × RS-232 [3pin-3.5mm Phoenix Connector]

1 × FSYNC [1pin-3.5mm Phoenix Connector]

1 × SERVICE [USB-C, Update Port]

Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver: 85mm [W] × 100mm [D] × 25.5mm [H]
Weight| Transmitter: 253g, Receiver: 260g
Power Supply| Input: AC 100~240V 50/60Hz Output: DC 24V/2A
Power Consumption| PoC Power Supply: 40W (Max)
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)

Operation Controls and Functions

Transmitter Panel

▪  On  USB signal is detected.

▪  Off: USB signal is not detected.

3| HDBT OUT| Connects to the HDBT IN port on the Receiver with CAT cable.
4| LINK LED| Connection signal indicator.

▪ The transmitter and Receiver are connected and linked.

▪  Flashing: The Transmitter and Receiver link is off due to USB low power mode.

▪  Off: Transmitter and Receiver are not connected.

5| RS-232| 3pin Phoenix connector, connected to a PC or control system for RS-232 command pass-through.
6| FSYNC| FSYNC port, used for level pass-through to the Receiver and synchronizing the external devices. The default level is 3.3V.
7| SERVICE| Firmware update port.
8| POWER LED| The LED will be on when the Transmitter is powered on.
9| DC 24V| DC 24V/2A power input port.

Receiver Panel

▪  On  USB signal is detected.

▪  Off: USB signal is not detected.

4| HDBT IN| Connects to the HDBT OUT port on the Transmitter with CAT cable.
5| LINK LED| Connection signal indicator.

▪ The transmitter and Receiver are connected and linked.

▪  Flashing: The Transmitter and Receiver link is off due to USB low power mode.

▪  Off: Transmitter and Receiver are not connected.

6| RS-232| 3pin Phoenix connector, connected to a PC or control system for RS-232 command pass-through.
7| FSYNC| FSYNC port, receiving level pass-through from the Transmitter and synchronizing the external devices. The default level is 3.3V.
8| SERVICE| Firmware update port.
9| POWER LED| The LED will be on when the Receiver is powered on.
10| DC 24V| DC 24V/2A power input port.

Application Example

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>