CaptionCall CR3 Pcs Modem And Router User Manual
- May 15, 2024
- Captioncall
Table of Contents
CaptionCall CR3 Pcs Modem And Router
Product Usage Instructions
Installation
- Make sure all devices, including your PCs, modem, and Router are powered down.
- Using an Ethernet network cable, connect the LAN or Ethernet network port of the cable or xDSL modem to the Router’s WAN port.
- Power on the cable or xDSL modem, and power on the PC you wish to use to configure the Router.
- Connect the accessory power adapter to the Router. And connect the other end of the adapter to an electrical outlet.
Software Specifications
- Practical function: DDNS, Wireless relay, Quick Setup
- Network Settings: WAN connection types supported – PPPoE, DHCP, Static IP, MAC Clone, Diagnostics, Static Router
- System Configuration: Software upgrade, Save & reload settings, System log, NTP server, Language
FAQ
- Q: What should I do if I encounter issues during installation?
- A: If you encounter any problems during installation, please contact your Internet Service Provider (ISP) for assistance.
- Q: How do I update the software on the Router?
- A: To update the software on the Router, navigate to the System Configuration settings and look for the Software Upgrade option. Follow the on-screen instructions to complete the software updateprocess.
Information
Fcc Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
About Product
- Product Type: Router
- Model name: CR3
- Brand (Trade) Name: CaptionCall
Installation
Before installing the Router, make sure your PC is connected to the Internet through the broadband service successfully. If there is any problem, please contact your ISP. After that, please install the Router according to the following steps. Don’t forget to pull out the power plug and keep your hands dry.
- Make sure all devices, including your PCs, modem and Router are powered down.
- Using an Ethernet network cable, connect the LAN or Ethernet network port of the cable or xDSL modem to the Router’s WAN port.
- Power on the cable or xDSL modem, and power on the PC you wish to use to configure the Router.
- Connect the accessary power adapter to the Router. And connect the other end of the adapter to an electrical outlet.
FCC STATEMENT
Caution
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Caution
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Software Specification
Software Specification
Practical function
DDNS
Wireless relay
Quick Setup
| Network Settings
WAN connection types supported: PPPoE、DHCP、Static IP
MAC Clone
Diagnostics
Static Router
| System configuration
Software upgrade
Save&reload settings
System log
NTP server
Language
Security Settings
WEB management
Remote WEB management
SSH access
Telnet
| DHCP Settings
DHCP Server
DHCP Client
The client list
Static IP
| Firewall
DMZ
Port Forward
Port/URL/MAC filter
Wireless basic function
Wireless enable/disable
Mutilple SSID
| Wireless Security
W64/128-bit WEP Encryption
WPA/WPA2、WPA-PSK/WPA2-PSKK
|