IRM MOTO BMW R1200RT Sahar Instruction Manual
- May 15, 2024
- IRM MOTO
Table of Contents
IRM MOTO BMW R1200RT Sahar
Specifications
- Product Name: IRM Moto Sahara Pegs
- Compatible with: BMW R1200RT, R1200GS, R1200RS, R1200R
- Parts Included : 6-32 x 1-1/2 bolts, Retaining clip, Mount Footrest
Installation Instructions
- Place the Sahara Peg into the valve cover.
- Slide the Sahara Peg retaining clip into the valve cover fromthe back.
- Using (x4) 6-32 bolts, attach the retaining clip to the SaharaPeg. Do not over-tighten to avoid stripping the threads.
- Repeat the above steps for the other side.
Care and Maintenance
- Periodically check the tightness of the retaining clip bolts.
- Apply grease to the pivot and detent mechanism regularly to ensure smooth operation.
IRM Moto Sahara Pegs
Fits BMW R1200RT, R1200GS, R1200RS, R1200R
Parts List
- (x1) Left assembly
- (x1) Right assembly
Tool List
- 7/64” Allen wrench
- Threadlocker
IRM Moto Sahara Peg Installation Instructions
| ID | Description |
|---|---|
| a | 6-32 x 1-1/2” bolts |
| b | Retaining clip |
| c | Mount |
| d | Footrest |
Installation Instructions
- Remove the spark plug cover from the valve cover
- Pull on the area where the spark plug wires traverse through the plastic, pull out, and forward
- Select the correct assembly for each side
- R or L is engraved on the back of the mounts
- Using a 7/64” allen key, remove the (x4) 6-32 bolts holding the retaining clip onto the Sahara assembly
- Take note of the orientation of the retainer clip for assembly later
- Place the Sahara Peg into the valve cover
- Slide the Sahara Peg retaining clip into the valve cover from the back
- Using (x4) 6-32 bolts, attach the retaining clip to the Sahara Peg
- Use threadlocker
- Tighten bolts evenly to ensure proper peg fit
- When bolts are tight there will still be space between the retaining clip and the mount, do not continue to tighten to try to eliminate this gap and strip the threads
- Repeat for the other side
Care and Maintenance
- Periodically check the tightness of the retaining clip bolts
- Apply grease to the pivot and detent mechanism regularly
FAQ
Frequently Asked Questions
- Q: How often should I check the tightness of the retaining clip bolts?
- A: It is recommended to check the tightness of the retaining clip bolts periodically, especially after long rides or every few weeks.
- Q: What type of grease should I use for the pivot and detent mechanism?
- A: We recommend using high-quality lithium-based grease for lubricating the pivot and detent mechanism. Make sure to follow the manufacturer’s instructions for application.
CONTACT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>