MICTUNING C2 Curved RGBW LED Rock Lights User Manual
- May 15, 2024
- MICTUNING
Table of Contents
MICTUNING C2 Curved RGBW LED Rock Lights
SPECIFICATIONS
C2 Installation Steps
Wiring Diagram
C2 Wiring Diagram
Installation Diagram
- Short wiring and long wiring are divided, be more environmentally friendly and save resources.
Technology Parameter
- Input Voltage : DC9-32V
- Output Power : 5A(max)
- Control Mode : Mobile phone
- Total Brightness Level : 8 grade
- Operating Temperature : -20 •c – 50 •c
- IP Grade : IP68
Thank you very much for purchasing the MICTUNING product.
MICTUNING® All Rights Reserved
C2 LED Rock Lights FAQ
-
Ql: How to judge whether the product is powered on correctly?
-
A 1 : First, after connecting the cable, turn on the switch, the switch indicator lights up.
-
Then, turn on the Bluetooth settings of the mobile phone and search for the device signal Rock Light-C2 or Rock Light-C2S, which means that the connection is correct and the product is powered on normally. If not, check whether the connection of the wire harness is correct.
-
Q2: The APP cannot search for the device.
A2 : Step 1, Check the wiring to ensure the correct connection -
Step2, Open the Bluetooth settings of the mobile phone, power on normally, and the device can be searched on the mobile phone
Step 3, For iPhone, please restart the mobile phone, and open the APP authorization and Bluetooth authorization (phone settings – privacy – Bluetooth – allowed apps). If the device cannot be searched in the APP, please provide the phone model and system model. For Android devices, you also need to open the location service and APP
location authorization to search and connect in the APP. (The locate function involves privacy data, and MICTUNING promises not to collect these data. The locate function is opened because of the regulations of the physical layer of Android devices).
-
-
Q3: Four lights on one side are not on?
- A3 : This is because one of the power cords in the control box has been pulled off, please contact our after-sales staff for quick replacement.
-
Q4: Can’t switch colors after Bluetooth connection?
- A4 : Please check the device you need to control in the APP options.
-
QS: After the Bluetooth connection, the light is black and you can’t turn on the light at all?
- AS : This is because one of the power cords in the control box has been pulled off. Please contact our after-sales staff for a quick replacement.
-
Q6: The APP cannot display the color correctly when switching colors.
- A6 : Turn on the test mode in the APP, take a video of the light color, contact our after-sales staff, and we will quickly replace the goods according to the video.
- For more questions, please don’t hesitate to contact us.