MICTUNING C2 Curved RGBW LED Rock Light Instructions
- June 6, 2024
- MICTUNING
Table of Contents
APP Introduction
The MICTUNING APP supports BLE and SPP Bluetooth protocols. By connecting Bluetooth, you can easily control and customize mictuning’s Smart LED Lighting products. Feature with RGBW multi-colors, create an amazing atmosphere. Perfect fo automotive and other uses.
MICTUNING APP with multiple lighting modes including single colo jump, fade, music mode, and more. DIV the color to fit for special occasions like off-road acing, capacity, and so on.
START ON
Guide Page
Home Page
Music Page
DIV Page
Settings Page
Modify Name Page
Group Page
Detection Page
Check whether the RGBW color works normally.
The interval between the light on & off is 1 s, and it will continue to cycle
without exiting the self-detection interface.
Pis note whether the light color is consistent with the color indicated by the
APP when detect.
Single Set Control
After selecting the light set, go back to the home page for a single color operation or DIV color effect.
Multi Sets Control
Select your wanted devices and then click the group button.Go back to home page for single color operation or DIY color effect.
** Reasons for Bluetooth connection failure
**
Situation
The Bluetooth device signal cannot be searched in APP
- Check the line fuse to ensure correct installation. Under normal power-on conditions, the light will be on.
- Be sure to search within 15 meters of the phone’s wireless range(in an open environment).
- Make sure that the Bluetooth device is not connected by other mobile phones. When the device is connected, other phones cannot search for the device signal.
Situation 2:
The APP searched for a Bluetooth signal but could not connect
- The APP must be authorized, otherwise, it cannot connect.
- For some Android phones, the first time you connect to the device, it is necessary to turn on Bluetooth for pairing in the general Settings, and then you can connect normally.
https://apps.apple.com/cn/app/mictuning/id1472665220| https://play.google.com/store/apps/details?id=com.qunchen.headlightSpp
Mictuning App Instruction
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be u sed in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>