ingenuity 12364-ES Landry the Lion Soothing Bouncer Instruction Manual
- May 15, 2024
- ingenuity
Table of Contents
12364-ES
Soothing Bouncer – Landry the Lion™
Bouncer • Asiento • Transat
ingenuitybaby.com
12364-ES Landry the Lion Soothing Bouncer
IMPORTANT! KEEP FOR FUTURE REFERENCE
WARNING
FALL HAZARD: Babies have suffered skull fractures falling while in and from bouncers when not used properly.
- NEVER leave the child unattended.
- Use bouncer ONLY on the floor.
- NEVER use on an elevated surface. Only use on the floor.
- NEVER lift or carry baby in bouncer.
- NEVER lift bouncer using a toy bar as a handle.
SUFFOCATION HAZARD: Babies have suffocated when bouncers tipped over on soft surfaces and/or when bouncers have been used as a sleep product.
- NEVER use on a bed, sofa, cushion, or other soft surface.
- Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
TO PREVENT FALLS AND SUFFOCATION:
- ALWAYS use restraints and adjust to fit snugly.
- STOP using bouncer when baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.
- Never let the child sleep in this product.
- NEVER use as an infant carrier for automobile or airline travel.
- NEVER attach any additional strings or straps to product or toy bar.
IMPORTANT
- Adult assembly required.
- Please read all instructions before assembly and use of the product.
- Care should be taken in unpacking and assembly.
- Examine product frequently for damaged, missing, or loose parts.
- DO NOT use if any parts are missing, damaged, or broken.
- Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
- This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.
Care and Cleaning
Seat pad and bolster – Remove from frame. Fasten buckles on seat
restraint and seat pad. Fasten all hook-and-loop patches to the corresponding
patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry,
using low heat.
Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry.
Do not immerse in water.
Frame – Wipe the metal frame with soft, clean cloth and mild soap.
Battery Information
The Music/vibration Unit requires (3) size C/LR14 (1.5V) alkaline batteries
(not included).
CAUTION: Follow the battery guidelines in this section. Otherwise,
battery life may be shortened or the batteries may leak or rupture.
- Always keep batteries away from children.
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment.
- Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the product into storage for a prolonged period of time.
- Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requiresa different operating voltage, replace the batteries when any function fails to operate.
- Do not dispose of product or batteries in fire, batteries may explode or leak.
**** This symbol indicates that the product is not to be disposed of in
household waste as batteries contain substances that can be damaging to the
environment and health.
Contact local authority for recycling & collection information.
FCC Statement / CAN ICES-3 (B) / NMB-3(B)
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Parts List and Drawin
| No. | Qty. | Description |
|---|---|---|
| 1 | 1 | Base frame wire |
| 2 | 1 | Left hub |
| 3 | 1 | Right hub |
| 4 | 1 | Foot covers, rear |
| 5 | 1 | Footr estwire |
| 6 | 1 | Back rest tube |
| 7 | 1 | Seat pad |
| 8 | 1 | Music/vibr a tion unit |
| 9 | 1 | Toy bar with toys |
| 10 | 1 | Bolster |
Using the Seat Restraint
Vibration calms and soothes the baby.
To use the vibration function:
Slide the Vibration ON/OFF switch to the ON or OFF position. The vibration
function automatically turns OFF in 30 minutes.
To use the music function:
Slide the Music/Volume switch to the LOW or HIGH position to play music at the
desired volume. Different melodies will play. Slide the switch to the OFF
position to stop the music.
Storage and Travel
To disassemble the bouncer for storage:
Use a small Phillips screwdriver to depress the release button on the inside
of each connecting hub on the bouncer.
Remove the footrest tube and base frame tubes from each connecting hub.
Find us on Facebook and Instagram @ingenuitybaby
Toys • Activity Gyms • Bouncers • Rockers • Swings • Bassinets • Playards
High chairs • Booster Seats
ingenuitybaby.com
MANUFACTURED FOR ©2023 KIDS2, INC.
www.kids2.com/help
KIDS2, INC. ATLANTA, GA USA 30305 • 1-800-230-8190
IMPORTED BY
KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894 -1855
KIDS2 SHANGHAI LIMITED Room7401, Shanghai Tower, No.479 Lujiazui Ring Road ,
Pudong New Area,
Shanghai 200120 •+86 21 31025990
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo,
Japan 150-0013 • (03) 5322-6081
KIDS2 UK LTD. 725 CAPABILITY GREEN, LUTON, BEDFORDSHIRE, UK, LU1 3LU • +44
01582 816 080
KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS •
+31 20 2410934
KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488
MADE IN CHINA