Cook Control 10200 EcoPower Inox Cecotec Kitchen Scale Instruction Manual

Cook Control 10200 EcoPower Inox Cecotec Kitchen Scale

Product Information

Specifications

• Product Name: Cook Control 10200 EcoPower Inox
• Model Number: 04143
• Power: 5-8 W
• Weighing Units: g, oz, lb:oz, ml

Product Usage Instructions

Parts and Components The product includes the following components:

• 1. Power knob
• 2. Tare function button
• 3. Display

Before Use Ensure to follow these steps before using the product:

1. Remove the product from its packaging.
2. Inspect for any damage and contact Technical Support Service if necessary.

Operation To operate the product:

1. Select the desired weighing unit (g, oz, lb:oz, ml) using the unit button.
2. Note that the unit cannot be changed during the weighing process.

Cleaning and Maintenance Regularly clean the product according to the instructions provided in the manual to ensure proper functioning. Technical Refer to the technical specifications section for detailed technical information about the product. Disposal of Old Electrical Appliances Follow local regulations for the proper disposal of old electrical appliances to minimize environmental impact. Warranty and Technical Support Service Contact the provided Technical Support Service for warranty claims and technical assistance.

Frequently Asked Questions

Q: How do I change the weighing unit during the weighing process?

A: The weighing unit cannot be changed once the weighing process has started. Please select the desired unit before starting the weighing.

Q: What should I do if I notice damage to the product upon unboxing? A: Immediately notify the Technical Support Service of Cecotec for further assistance.

Q: How do I clean the product?

A: Refer to the cleaning and maintenance section in the manual for instructions on cleaning and maintaining the product.

Q: Where can I find the warranty information?

A: Warranty information can be found in the Warranty and Technical Support Service section of the manual.

COOK CONTROL 10200 ECOPOWER INOX

SAFETY INSTRUCTIONS

• Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.
• This device is for personal use only and is not intended for commercial purposes.
• Do not operate this appliance if there are any visible signs of damage. Always check for damage before each use and in case of malfunction, contact the Technical Support Service of Cecotec.
• Keep the device away from heat sources.
• Do not use the device outdoors.
• Static pressure is effective. Do not drop or strike the scale, it could damage easily.
• Avoid hitting or dropping the scale to prevent damages.
• Do not overload the scale or put heavy things on it.
• Do not immerse the product in water or any other liquid. Make sure the surface is always dry.
• Do not expose the device to wet and hot conditions in order to ensure its shelf life.
• Do not place or store the device in an upright position.
• Do not jump or stand on the device.

PARTS AND COMPONENTS

Img. 1.

1. Power knob
2. Tare function button
3. Display

BEFORE USE

Take the device out of its package and remove all packaging materials.
Check carefully if there is any damage, and if there is, immediately notify the Technical Support Service of Cecotec.

OPERATION

Place the scale on a
Rotate the power knob not less than 120º, the LCD display will show “0”.
Place the food to be weighed on the scale (or in a bowl if required). The LCD will show the weight results.
Img. 2.

Weighing units
Select between g, oz, lb:oz or ml (for liquids).
Img. 3.

Under weight mode, press the unit button to choose the unit. This button is located on the back of the scale.
Note: Set the desired weighing unit before starting weighing. The unit cannot be changed during the weighing process.

Tare function

• Place the container on the device’s platform. The LCD display will show the weight of the container.
• Press the tare function button to clear the weight of the container and reset to 0.
• Place the ingredients inside the container. The display will show the weight of the food only. The display will show negative values when the container and the food have been removed from the scale. To clear it, press the tare function
• button and the display will show “0” again. Img. 4.

Errors

Img. 5.
The scale is overloaded. Do not place over 5 kg on the weighing platform.

Img. 6.
Low battery. The device will automatically turn off after a few seconds. Please, rotate the power knob not less than 120º.

CLEANING AND MAINTENANCE

• Use a soft, damp cloth to clean the surface. Do not use chemical or harsh abrasive cleaning agents.
• Do not store the device in an upright position.

TECHNICAL SPECIFICATIONS

• Model: Cook Control 10200 EcoPower Inox
  Product reference: 04143

Features:
High-precision strain gauge sensor system

Capacity: 5-8 kg/1 g
Units: g, oz, lb:oz, water-ml, milk-ml
Automatic power generation control Battery-free technology Auto shut-off

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment.

The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the appliance correctly. If the product has a built- in battery or uses batteries, they should be removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

WARRANTY AND TECHNICAL SUPPORT SERVICE

• This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.
• The warranty will not cover the following situations:
• The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.
• The product has been disassembled, or repaired by persons, not authorised by the Faults deriving from the normal wear and tear of its parts, due to use.
• The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.
• If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210 728.

www.cecotec.es

Grupo Cecotec Innovaciones S.L. C/ de la Pinadeta s/n, 46930 Quart de Poblet, Valencia (Spain) EA03200629

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>