Alphamount APSF3 TV Wall Mount Bracket Full Motion User Manual
- May 15, 2024
- Alphamount
Table of Contents
Alphamount APSF3 TV Wall Mount Bracket Full Motion User Manual
Thank you for choosing this Alpha mount product! At Alpha mount we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don’t hesitate to contact at [email protected].
IMPORTANT SAFETY INFORMATION
-
Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any questions or concerns, please contact our customer service at [email protected].
CAUTION: Avoid potential personal injuries and property damage! -
Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We are not liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
-
This product is designed for use in wood stud, solid concrete, concrete block and brick walls – DO NOT install into drywall alone.
-
The wall must be capable of supporting five times the weight of the TV and mount combined.
Weight Restrictions
⚠ WARNING
DO NOT exceed the maximum weight indicated. This mounting system is intended
for use only with the maximum weights indicated. Use with products heavier
than the maximum weights indicated may result in failure of the mount and its
accessories, causing possible damage and or injury.
Check the VESA Pattern of Your TV before the Installation
If your TV VESA is greater than 200 x 200mm / 7.9 x 7.9″ or less than VESA 75
x 75mm / 3 x 3″, this mount is NOT compatible.
If this mount is NOT compatible, please contact customer service at
[email protected] to find a compatible
mount.
Verify Your Wall Construction
Tools Needed (Not included)
Supplied Parts and Hardware
⚠ Warning: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, contact our customer service at [email protected]. · Please note: Not all hardware included in this package will be used.
Step 1 Choose the Combination that Applies to Your VESA Hole Pattern
Step 2 Secure the Faceplate [01] or Faceplate Extender Brackets [02] to TV
When finishing securing the TV bolts into the TV, remember to tighten the bolts [G] using a Phillips screwdriver.
Step 3 Attach the Arm Assembly / Wall Plate [03] to Wall
For wood stud installation, follow STEP 3A
For concrete installation, follow STEP 3B
Step 3A Wood Stud Option
Step 3B Solid Concrete or Concrete Block Option
⚠ WARNING:
- Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against the wall plate.
- Ensure the arm assembly / wall plate [03] is securely fastened to the wall before continuing to the next step.
- Any material covering the wall must not exceed 5/8″ (16mm).
- Mount the wall plate directly onto the concrete surface.
- Minimum solid concrete thickness: 8″ (203mm).
- Minimum concrete block size: 8 x 8 x 16″ (203 x 203 x 406mm).
- Never drill into the mortar between blocks.
Step 4 Verify Wall Mount Installation by Putting Pressure on Wall Mount
Step 5 Secure the TV onto the Arm
Step 6 Tilt Adjustment
- Loosen both tilt bolts [T] slightly.
- Adjust TV to your desired tilt angle.
- Retighten both tilt bolts [T] to fix the tilt angle.
Step 7 Level Adjustment
Documents / Resources
|
Alphamount APSF3 TV Wall Mount Bracket Full
Motion
[pdf] User Manual
APSF3 TV Wall Mount Bracket Full Motion, APSF3, TV Wall Mount Bracket Full
Motion, Mount Bracket Full Motion, Bracket Full Motion, Full Motion
---|---