smartvu home 9068460 Smart Wi-Fi Light Switch User Guide
- June 5, 2024
- smartvu home
Table of Contents
smartvu home 9068460 Smart Wi-Fi Light Switch User Guide
Download the SmartVU Home App
If you haven’t already, download and register an account on the free SmartVU Home app.
It is available on both iOS and Android.
Simply search “SmartVU Home” or you can scan the QR Code below.
Launch the SmartVU Home app from your phone or tablet and select the Register button.
Follow the on-screen instructions.
Connection Preparation
NOTE: We recommend that this Light Switch be installed by a qualified
electrical service person.
The SmartVU Home app supports TWO pairing modes: Smart Mode and AP Mode.
Smart Mode:
Once the SmartVU Home Light Switch is switched ON, to enter pairing mode, press and hold the RESET button for 5 seconds.
The indicator on the Light Switch will start blinking rapidly, twice per second.
AP Mode:
Once the indicator on the Light Switch is blinking rapidly, press and hold the RESET button for another 5 seconds.
The indicator on the Light Switch will start blinking slowly, once every three seconds.
Add Device
Once the SmartVU Home Light Switch is in pairing mode, select Add Device or in the SmartVU Home app.
Select Electrical, then Switch (Wi-Fi).
Follow the app’s on-screen instructions.
By default the SmartVU Home app will attempt pairing in Smart Mode.
Confirm the Light Switches indicator is blinking rapidly, and select Confirm Indicator’s rapidly blinking to proceed.
Otherwise, if the Light Switches indicator is blinking slowly, select Other Mode in the top-right, then AP Mode.
Once you’ve confirmed the Light Switch is blinking rapidly, you’ll be prompted to enter the Wi-Fi Password.
NOTE: Make sure your phone or tablet is connected with your Wireless
Router. Please note this Light Switch will only connect to 2.4GHz Wi-Fi, not
5GHz Wi-Fi.
The SmartVU Home app will scan and connect to the Light Switch, showing
Device Added Successfully.
Control Device
Once the Light Switch has been added successfuly, you can open the control
options.
For example, Fig-1 shows the Light Switches are both ON, with the Switch and Timer options available.
Fig-2 shows the Timer option, schedule your Lights to turn ON/OFF as required.
NOTE: Select Edit to rename the Light Switch.
Share Device
Once the Light Switch has been added successfuly, you can share control of the Light Switch, if another resident in your home has an account.
Select Edit in the top-right, then Share Device. When prompted select
Add Sharing.
Ensure the correct Region is selected, and enter the Mobile Number/Email you want to share control with.
NOTE: If you want to stop sharing with a user, swipe LEFT on the user’s name, and press DELETE.
You’ll then be prompted to CONFIRM.
Troubleshooting
For more information, visit www.smartvuhome.co.nz
Unable to pair the Light Switch with the App.
- Option 1: Ensure your phone or tablet is connected to a 2.4GHz Wi-Fi Network.
- Option 2: Check that the Light Switch is in the correct pairing mode. Eg. If the Light Switch is blinking slowly, the Smart Mode pairing option won’t connect.
- Option 3: Check the Internet connection on your Wi-Fi Network.
- Option 4: If pairing via Smart Mode, ensure the Wi-Fi Password entered is correct, and you’re connecting to the same Wi-Fi Network as your phone or tablet.
- Option 5: Ensure the Light Switch is not positioned too far from your Router.
Specification
- Working Voltage: AC 110-240V ~ 50/60Hz
- Max Load: 800W/Gang (resistive load)
- Working Current: 10A Max
- Standby Consumption: 0.1mA
- Wireless: 2.4GHz only
- Material: ABS Flame Retardant
© 2020 Dish TV Technologies Ltd. SmartVU Home is a trademark of
Dish TV Technologies Ltd.
Google and Google Play are trademarks of Google LLC.
Apple® and the App Store® are trademarks of Apple Inc.