ingenuity 13099-NA InLighten Soothing Swing Swivel Infant Seat User Manual

ingenuity 13099-NA InLighten Soothing Swing Swivel Infant Seat

Product Information

Product Specifications:

• Brand: InLighten
• Model: Soothing Swing – Dakota
• Website: ingenuitybaby.com

Product Usage Instructions

Battery Information:
The remote control requires a CR2032 (3V) battery (included). The vibration unit requires (1) size C/LR14 (1.5V) alkaline batteries (not included).

Care and Cleaning:
Ensure the swing is placed in a suitable cot or crib. Keep the swing away from heat sources and out of direct sunlight for optimal performance.

Parts List:

Using the Swing Control Module:

• Power Control:
  Touch the Power switch to activate the Swing Control Module.

• Volume Control:
  Adjust the volume for music and nature sounds using the Volume Control buttons.

• Mobile Illumination:
  Press the Mobile Illumination button to start the mobile and switch on the lights. Press it again to activate a random light/play pattern.

• Timer Control:
  The swing offers a timer function that stops the swing motion when the timer expires. Adjust the timer settings using the Timer Control feature.

• Swing Speed ​​Control:
  The Speed ​​Selector function provides 5-speed settings and OFF. Change the swing speed setting as desired for optimal comfort.

• Melody/Nature Sound Control:
  Select between different melodies and nature sounds using the control buttons for a soothing experience.

Frequently Asked Questions (FAQ):

1. How do I clean the seat pad?
   To clean the seat pad, gently wipe it with a damp cloth using mild soap if necessary. Allow it to air dry completely before use.

2. Can I use rechargeable batteries for the vibration unit?
   We recommend using alkaline batteries for optimal performance. Rechargeable batteries may not provide sufficient power for the vibration unit.

IMPORTANT SAFETY INSTRUCTION

IMPORTANT!
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

FALL and STRANGULATION HAZARDS:
Infants have suffered head injuries falling from seats and have been strangled in straps.

• ALWAYS use the restraint system. Adjust to fit snugly.

• STOP using the product when the infant attempts to climb out (approximately 9 months).

• DO NOT use this product once your child can sit up unaided or weighs more than 9 kg/20 lbs. DO NOT use this product if your child weighs less than 3kg/6 lbs.

• Stay near and watch the baby during use. This product is not safe for sleep or unsupervised use. If the baby falls asleep, remove the baby as soon as possible and place the baby on a firm, flat sleep surface such as a crib or bassinet.

• Never let the child sleep in this product.

• DO NOT move or lift this product with the baby inside it. Never lift a product using a toy bar as a handle.

• ALWAYS place the product on the floor. NEVER use this product on an elevated surface (e.g. a table).

• NEVER attach any additional strings or straps to the product or toy bar.
  SUFFOCATION HAZARD: Young infants have limited head and neck control. If the seat is too upright, the infant’s head can drop forward and compress the airway.

• ALWAYS keep the swing seat fully reclined until the infant is at least 4 months old AND can hold up their head without help.
  SUFFOCATION HAZARD: Babies suffocate when seats are tipped over on soft surfaces.

• NEVER use on a bed, sofa, cushion, or other soft surface.

Prevent Serious Injury or Death

• NEVER leave the child unattended.
• To avoid injury ensure that children are kept away when unfolding and folding this product.
• Do not let children play with this product.
• When using the USB cord, only use the one supplied with this swing.
• Check the USB cord and wall adaptor regularly for damage. Do not use it if any damage has occurred.
• Use a USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor.
• The product shall only be used with a transformer for toys.
• The transformer is not a toy.
• This product is only to be connected to equipment bearing either of the following symbols:
• Do not use extension cords.
• NEVER use as an infant carrier for automobile or airline travel.

CAUTION
This product contains small parts. Adult assembly is required.

IMPORTANT

• The provided USB cord is 183cm in length.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine the product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.

Battery Information

• The remote control requires a CR2032 (3V) battery (included).
• The vibration Unit requires (1) size C/LR14 (1.5V) alkaline batteries (not included).
• WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN. NEW AND USED BATTERIES ARE HAZARDOUS.
• Swallowing or placing a button battery inside the body may lead to death or serious injury in as little as 2 hours due to chemical burns and potential perforation of the esophagus.
• Medical attention should be sought immediately if you suspect a button battery has been swallowed or placed inside the body.
• Examine the product and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if the compartment is not secure.
• Dispose of used button batteries immediately and safely. Batteries can still be dangerous.

CAUTION:
Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture. To prevent battery leaks, which can burn skin and eyes:

• Always keep batteries away from children.
• Never mix old and new batteries or batteries of different brands or types.
• Always replace the entire set of batteries at one time.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Dispose of used batteries immediately.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
• Do not dispose of products or batteries in a fire, batteries may explode or leak.

This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

Care and Cleaning

• Seat pad – Remove from frame. Fasten the buckles on the seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
• Bolster – Machine wash with cold water, gentle cycle. No bleach. Air dry flat.
• Toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame – Wipe the metal frame with a soft, clean cloth and mild soap.
• Storage – When putting a swing away for storage, always store it in a dry location, away from any heat sources, and out of the sun.

Parts List

No.| Qty.|

Description

---|---|---
A| (2)| M5 Philips Head Screws
B| (2)| M5 Nuts
1| (1)| Swing head assembly with control
2| (1)| Left leg tube
3| (1)| Left front foot
4| (1)| Right leg tube
5| (1)| Right front foot
6| (1)| Swing arm assembly
7| (1)| Cross brace assembly
8| (1)| Right recline
9| (1)| Left recline
10| (1)| Footrest tube
11| (1)| Backrest tube
12| (1)| Vibe Unit
13| (1)| Mobile with toys
14| (1)| USB cable
15| (1)| Seat Pad
16| (1)| Headrest
17| (1)| Bolster
18| (1)| toys(Circle)
19| (1)| toys(elephant)
20| (1)| IR Remote

Not included

Use a USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor.

Installation Instruction

Use a USB cord only with a 5 Volt/1 Amp (5 Watts) USB A wall adaptor.

Using Instruction

Using the Seat Restraint

Using the Recline Function

Rotation of the seat

Storage and Travel

IR Remote

Using the Swing Control Module

• Touch the Power switch to power the Swing Control Module.
• The Speed Selector function provides 5-speed settings and OFF. The LEDs operate sequentially and in bar graph mode. To start the swing function, touch the button until the flashing LED bar graph displays the desired setting.
• When you change the speed setting during swing motion, the LED bar graph will flash for five seconds during the speed adjustment. When the swing timer expires, the swing stops, and the Speed Selector and Timer LEDs turn OFF.
• Use the Swing Timer Select function to turn OFF the swing automatically. Touch the button to sequence to the desired timer setting of 30, 60, or 90 minutes. The three LEDs above the button indicate the selected period. If you do not select a timer setting (all LEDs are OFF), the unit uses a default time of 30 minutes for auto-shutoff. To use the swing function after auto-shutoff, either press the Swing Timer Select button or the Speed Selector button.
• Touch the Nature Sounds/Music button to begin music and nature sounds playback. Touch as needed to select the desired natural sound or song. Auto-shutoff occurs after about 20 minutes.
• Touch the Volume Control switch as needed to turn off or adjust the volume for music and nature sounds.
• Press the Mobile Illumination button to start the mobile and to switch on the lights. Press it again to get into a random light/play pattern.

Using the Vibration Unit

To use the vibration function: Push the button to turn on or turn off the vibe unit.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Find us on Facebook and Instagram @ingenuitybaby.

MANUFACTURED

• KIDS2, INC. ATLANTA, GA USA 30305 • 1-800-230-8190 IMPORTED BY • IMPORTÉ PAR
• KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
• KIDS2 SHANGHAI LIMITED Room7401, Shanghai Tower, No.479 Lujiazui Ring Road, Pudong New Area, Shanghai 200120 •+86 21 31025990
• KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo, Japan 150-0013 • (03) 5322-6081
• KIDS2 UK LTD. 725 CAPABILITY GREEN, LUTON, BEDFORDSHIRE, UK, LU1 3LU • +44 01582 816 080
• KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS • +31 20 2410934
• KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488MADE IN CHINA • HECHO EN CHINA • FABRIQUÉ EN CHINE

www.kids2.com/help.

©2023 KIDS2, INC.

References

• Ingenuity™ – Kids2, LLC
• Kids2 Contact Us – Kids2, LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>